When LTM is turning off, user space will turn off LTM histogram and
then wait for LTM hist off event from driver to change the state
from offpending to off. But if device enters IPC during this time,
driver will not notify user space with LTM hist off event and LTM
will stuck in offpending state. This change remove the check
before LTM hist off event notification to avoid LTM state stuck issue.
Change-Id: I073adabf72c6454acb8ab4d333c0547723523781
Signed-off-by: Ping Li <pingli@codeaurora.org>
Add support to parse ddr type and corresponding
highest bank bit for configuring UBWC parameters.
Change-Id: I54f79a60f55fd6b146783c8f53fce1bf6c8d8d0a
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Add support in hw catalog to parse the maximum number of concurrent
TUI displays supported in SDE.
Change-Id: Ic1f4d93afc472c2fa073e1d292ebd1d27e40f4ec
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Expose an API in encoder to control display irq's
when the VM enters and exits TUI use case.
Change-Id: Ic2386dcebfd8a9dd2ce06f068c6daf066a3e885f
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Add support to read register ranges and IRQ lines that needs
isolation during VM switch. Register for vm resource collection
event providing the callback function.
Change-Id: Ie1edf0794a8de89cc44279892433b45a54eba609
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
This change to address use after free and null checks in
sde driver.
Change-Id: Iade91596748b1b867ae959e61fca0f7072eda8f3
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Refactor topology group check helpers into a single
function to remove duplicate code. This change also
uses atomic state to extract topology information
since those functions can be called during atomic
check phase.
Change-Id: Ia262009e0b8fe9fcdeff05e544d2e59be35c9c54
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Current validation checks for cwb are not complete for
destination scaler concurrency. This change fixes cwb
checks to handle wb roi and frame buffer bounds checks
based on tap point and the destination scaler use.
Change-Id: I4a0277fea262621e73459243f60d3018bc475a67
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Currently during CRTC atomic check phase, driver is counting
the number of connectors attached to the CRTC by iterating over
all the connectors available and checking if they are attached
to the CRTC. The current implementation uses the old connector
state, which has an invalid state for the first commit. This
causes the number of attached connectors to always be 0 for the
first commit.
This change extracts the new connector state from the atomic state
and ensures the calculation is done before checking crtc features.
Change-Id: I58d641086f18e8624cbc2d432443323a6a44792e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Reset the power_event handle to NULL after unregistering
during crtc disable. This will avoid dangling pointer
being accessed later.
Change-Id: I73044835e8594b776eb593f2f0a4a1d2b5563531
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change fixes the issue in selecting the correct
perf index for the 90Hz refresh rate, before this change
values corresponding to 60Hz were getting applied for this
refresh rate.
Change-Id: Id4f8af4da95f0d13d30f6316dc26dd65b61d7f79
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change implements a new feature to read the cmds response
of the panel from sde connector interface. Sde connector opens
debugfs interface for all the connectors those have support for
cmd receive operation.
Sde connector init module creates rx_cmd debugfs file at
/<debugfs-root>/dri/0/DSI-1/ for DSI-1 connector.
Format for DSI command transfer:
echo "command bytes" > /<debugfs-root/dri/0/DSI-1/rx_cmd
byte-0: the length of received buffer
byte-1: data-type
byte-2: last command. always 0x01
byte-3: channel number
byte-4: flags. MIPI_DSI_MSG_*, must be set to 0xa
byte-5: 0x00
byte-6 and byte-7: command payload length
byte-8 to byte-[8+payload length]: command payload
Example:
echo "0x01 0x06 0x01 0x00 0x0a 0x00 0x00 0x01 0x0a" > rx_cmd
The command receive operations are allowed only if controller
(ex. DSI controller) is in active state.
Read the value of panel response:
cat /<debugfs-root>/dri/0/DSI-1/rx_cmd
returns the value of this command.
nothing - failure, xx xx - success.
Change-Id: I912b65d606e248c7a886d219f4363bf7766ee7b6
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
For dual panel, if they both used sim TE, the vsync sources
were set to the same watchdog timer. That's wrong, so need to
set different watchdog timer for different panels.
Change-Id: I8a5b4c6bb86b0b640d24fbfe6517e223d313fb68
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
For existing HW, in-line rotation is only supported on master
planes. Remove publishing support for rotate-90 and rotate-270
on all virtual planes. Also, fixup the published support for
180 degree rotation which can be performed on all pipes that
have both X & Y axes reflections.
Change-Id: Iff248abeefeb2a100ffd833d94b429b47b6d407b
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Fix prefill line calculation for high refresh rate
usecase and define correct number of prefill lines
for lahaina target.
Change-Id: Ib3467b9beb43de9c5faa2b1af2d8873a89c9c481
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
With 120 fps panels and vfp method of dfps ,the vfp is very large in lower
fps and there is huge time gap between programmable fetch start (MDP vsync)
and panel vsync. As fence is released early timing registers are modified
by the next commit before the previous timing parameters takes effect and
this is leading to underrun. With variable programmable fetch start MDP
vsync is close to panel vsync and avoids such condition.
Change-Id: Id88b5e2957bf4af751f49f1f32327715a34b102b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Existing idle notify schedule logic tries to schedule
this event before display power on. If display power on
takes more than 80ms, it triggers the idle notify before
processing first display power on frame. This patch
schedules the idle notify after frame trigger for
valid notification.
Change-Id: If94108e141b5c19d123033e9d37333e98fb987f7
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
The change allows for multiple TE checks during a pp done timeout.
With this change, when a timeout occurs the panel status is checked
using the default ESD check status method followed by multiple TE checks.
Change-Id: If813964bab55c5e8113721060aa5b279f30fa5e0
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change uses tracing_mark_write as default trace
point for msm drm driver traces.
Change-Id: I13056a8ff0513935f31bef7d8280c0a95c4394b6
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Remove the output parameter "extra_frame_trigger_time" from this
function as callers are not using it, so it is not needed.
Change-Id: I98fcfe974c64da9ce62456a693330b898707e6b4
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Adjust the QSYNC line count calculation to compensate for the
idle time, when no transfers are actively taking place.
Change-Id: If91eab25321eea6e6880f07605c5a9c1b7b7ee05
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
