If Vdev id is not present driver tries to get vdev with vdev id 0
from pdev. Vdev with vdev_id 0 might not be present on pdev so use
objmgr API wlan_objmgr_pdev_get_first_vdev to get the first vdev.
Change-Id: I2ae0d6056709339a8167582ec327269aa84c93f4
CRs-Fixed: 2349699
For the case that there is leakage of vdev due to incorrect reference
count usage, and another vdev for the adapter is created, get ref of
vdev by mac address might get the incorrect vdev object since both vdevs
will have the same mac address and the leak one will be first matched
since it is created first.
To address this issue, use vdev pointer in adapter instead of pdev as
input parameter of related functions.
Change-Id: I855497358b5dabf3fc5c0f71a859dd7cae1b450a
CRs-Fixed: 2312155
In a scenario wherein after the sched_scan_start there is a system
recovery and previous pending sched_scan request is lost and during
the sched_scan_stop driver is returning error.
Because of which __cfg80211_stop_sched_scan will not
clear “rdev->sched_scan_req” blocking further sched_scan requests.
Return success in the event that the driver does not have any pending
sched scan to flush.
Change-Id: I6aba88ce033c59ebae54ca792e241a17b649ad73
CRs-Fixed: 2340653
Define new test config attribute to configure action frame
transmission in HE trigger based PPDU.
Change-Id: Iad53381ec75303ba0717292b1cff94e94cda3de5
CRs-Fixed: 2322602
Define new test config attribute to configure HE single user
PPDU transmission.
Change-Id: I4539ead98f31d0f0c4dee0534f6a8f29b8bd86cc
CRs-Fixed: 2322595
Add a new wifi test config QCA vendor attribute to configure
HE operating mode control field bandwidth and number of
spatial streams.
Change-Id: Ibe70d28329353e48c7bb323ab367c63be9706038
CRs-Fixed: 2320749
Fix potentail memory leak when post message in TDLS module:
1. Add flush callback to hanlde memory free and release reference count;
2. Check the return status when post message and free the resource for
failure case.
Change-Id: I0a693ccb5704509a4220f26e024ce8c6c823890c
CRs-Fixed: 2341652
1. Send add random mac addr rx filter WMI command
to target
2. Add/Del the active random mac addr entry
3. Clear random mac addr from target if not active
Change-Id: I9dcbdc20b76d9865da7a8db6ee013bf5e44e4407
CRs-Fixed: 2322097
print format "pS" in module will call module_address_lookup in
kernel, which will disable preempt. This could result in some
performance issues, like block rt task vsync_retire_work and
then cause janks.
Change-Id: Ic334490b607d2fcee9eede2a0175c0f92cfc7ffd
CRs-Fixed: 2304391
In success scenarios wlan_cfg80211_scan return the qdf status without
converting it to os return status.
Convert the qdf status to os return status before returning in
wlan_cfg80211_scan.
Change-Id: Iee0503191aca371634c9dae9daf15f5aadfe7e2e
CRs-Fixed: 2334591
NDP ids copied from NDP instance id array for NDP
end request does not use nla_data to copy the ids
resulting in incorrect data getting copied.
Fix is to use nla_data for NDP instance id array to
copy the ids.
Change-Id: I74795367a5c5a57f42cb1a67ece9cebfeb259b71
CRs-Fixed: 2328245
For generation 3 spectral reports for the 80 MHz segments
come as part of different events. To deal with this a
state machine is added to report handler. Noise floor
value of the lowest chain in the chain mask is populated
in the SAMP message.
CRs-Fixed: 2236331
Change-Id: Ie24426449cf8503c9d7f7c30ca617a6697ca2b5e
NAN vdev ref count incremented as part of end_ind handler
is not released which will result in the nan vdev not
getting physically deleted.
Fix is to release nan vdev ref in os_if_ndp_end_ind_handler.
Change-Id: I31a32fa241fb9e86d3a64d490722bc42905970c4
CRs-Fixed: 2325580
Add following APIs to translate NL param type to
crypto param type.
1.osif_nl_to_crypto_auth_type()
2.osif_nl_to_crypto_akm_type()
3.osif_nl_to_crypto_cipher_type()
Change-Id: Iba0d57e63db98cf81ed0ce5c0a79ae7f8239d1a9
CRs-Fixed: 2300761
We are transitioning to new logging infrastructure
by using existing mtrace functionality.
Add new logging for complete scan request and response path.
Change-Id: Iac644a78ef521721d33ce7568be56b47c55fed6b
CRs-Fixed: 2308272
Define new test config attribute to configure the support
for receiving the MPDU with operating mode control field.
Change-Id: I8f4885ebc705e2d6acfa0c97bdcd6b2bb4baaaca
CRs-Fixed: 2305757
P2P Listen offload is not a requirement for Genoa, hence featurize
P2P listen offload code to save memory foot-print for Genoa.
Change-Id: I3c32b4ee2b37421e49acee4bd20d36e7a8a3bf77
CRs-Fixed: 2304555
Add FTM flags to enable/disable FTM and enable NL80211 only, enable TX99
only or both.
Change-Id: I18bbbadd65d23221dc4d739e05235f4d81c12043
CRs-Fixed: 2240572
Define new wifi test config attribute to override the MU EDCA
params with defaults in the driver.
Change-Id: Ic12e322a82a558a5b01e13d6d5e288eb6933c1cc
CRs-Fixed: 2290381
Duplicate stats buffer in the callback so that all
allocations get freed by its owner, this will avoid
memory leak issue because of race condition between
umac and upper layer.
Change-Id: Id18d75eb9adc46a6147634eb5b1e0babe32c7c37
CRs-Fixed: 2289355
Spectral allocates its nbuf using qdf_nbuf_alloc() and calls
Netlink functions to send the SKB to the application layer.
After sending SKB, the Netlink send functions free the SKB using
dev_kfree_skb(). As a result, QDF nbuf tracker treats this
an SKB leak and panics the system.
To avoid this leak, remove the SKB entry from QDF nbuf debug hash table
by calling qdf_net_buf_debug_release_skb() before handling
the SKB to Netlink send functions.
Change-Id: I62c7046d1481c2a38ef5321410ebca9f5f5f34ed
CRs-Fixed: 2285654
Currently struct nan_datapath_peer_ind contains the following:
uint8_t session_id;
This is problematic since "session_id" is a legacy concept and should
not be used in the converged project. Fortunately this field does not
actually serve any purpose. But in order to cleanly remove it a 3-step
approach is required.
Step 1 (this change):
Remove the logic from the converged NAN code which currently reads
this field and logs the value.
Step 2 (qcacld-3.0 Change I2819556d48a9dd901158aaa04d6bda9c36f33012):
Remove the logic from the legacy NAN code which sets this field.
Step 3 (qcacld Change Ibeb8007c96ae1a902bfd7dd99a42ba4a291a1dc6):
Remove the session_id field from struct nan_datapath_peer_ind.
Change-Id: If6cf48ccbfe87b23b275720df51c6cc26af9fa5e
CRs-Fixed: 2284399
Normally probe request is sent in a passive channel if the
beacon received from the AP. With the strict passive scan
feature, STA doesnot send the probe request even if it
receives beacon from AP.
This can be enabled by using below command.
iwpriv /cfg80211 wifix pas_scanen 1/0
Added a support to send strict passive scan flag to FW in
cfg80211 framework during scan start command.
Change-Id: Ia2c069872541dba64c3d11fc0b533c2d202ee898
CRs-Fixed: 2280181
When disconnect happens, TDLS_NOTIFY_STA_DISCONNECTION will be
send to scheduler_thread, in bad case, it is processed after
3s later, and the vdev passed in notify msg has been freed in
the period, invalid vdev causes invalid memory access.
change as below:
1.1 Get vdev ref before send msg
1.2 register callback for release ref
1.3 send msg to scheduler_thread
1.4 process tdls notify msg and call callback function.
Change-Id: I2b03db8b30db623796f2e8299f14ee31e28efb91
CRs-Fixed: 2275019
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: I4072b6740cb43200fd95c40943b66e1d5f8f1847
CRs-Fixed: 2266719
Such log will show once has the spectral scan result message
need to send to application, which is boring and delete it
Change-Id: I4e7fd8877b354d94022b65a8e43cc4ca3e285943
CRs-Fixed: 2274032
Currently, it uses the dev mac as peer mac addr for parameter and
the function wlan_obj_psoc_peerlist_get_peer_by_pdev_id returns
NULL because the mac addr does not match. Then the callback will
be ignored for WMI_UPDATE_STATS_EVENTID.
Change-Id: I6e257d3103315bbacb66b3f5db660cfa883966b5
CRs-Fixed: 2272056
Forward declare 'struct wmi_spectral_cmd_ops' in
file wlan_spectral_utils_api.h to avoid
compilation issue when spectral feature flag
is disabled.
Change-Id: Iba8dfbb2007f20d409fbb2d67ee29f702264e50d
CRs-Fixed: 2269005
Add support for Short Range Devices 25 mW max power
channels in ETSI regulatory domain.
Add Short Range Devices 25 mW max power channels only
if DSRC feature is disabled.
Provide service apis to check SRD and DSRC channels.
Change-Id: Ib2a1d7cf191d07319cb29038ad60130f5cbe7f16
CRs-Fixed: 2264790
Error: implicit conversion from enumeration type
'enum wlan_umac_comp_id' to different enumeration type
'wlan_objmgr_ref_dbgid' [-Werror,-Wenum-conversion]
Change-Id: I641c1eee77e977547841cebb4fd2fef8c06ca18c
CRs-Fixed: 2271058
Vendor abort scan request is cancelling all
the pdev scans instead of a specific scan command.
Modified vendor abort scan API to cancel specific
scan request.
Change-Id: I087637e44b8ee7f6cc12e9e47db04eec3f9ff93e
CRs-Fixed: 2270030
Sometime user may not delete active NDP sessions before deleting NDI or
may not delete NDI before driver unload. In such case vdev/peer object
memory will leak. Free all NDI peers for that vdev before processing NDI
delete and free all NDI peers/vdev at driver unload.
Change-Id: I04631ffd611d6ded318ddfb65b2dfeba479c9bdc
CRs-Fixed: 2262769
Add support for NDP TCP/IP params in ndp initiator
request, responder request, indication and confirm.
Change-Id: I5d60af154ea4a2f33d18d9b86049f316e7fbc524
CRs-Fixed: 2252227
Assign the vdev in NDP request message and hold the vdev reference till
the command is processed. Else the consumer of message will fail when
trying to take reference since vdev was not set in request packet.
Change-Id: I4c7e50690eff1f92f151f00209ec786a03252e76
CRs-Fixed: 2252035
Create NDI vdev after adapter is added to back of hdd adapter list,
so that vdev create completion callback can identify right adapter
and set corresponding completion variable.
Change-Id: Id0d78a5e482c875fee346224f37c29a874814133
CRs-Fixed: 2252031
Add vendor command support to enable or disable GTX.
Currently there is no vendor attribute to enable/disable
GTX from vendor command. Add vendor attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_GTX support through
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor command
and with new wmi command WMI_VDEV_PARAM_GTX_ENABLE.
Change-Id: I8a740f9209ffd5f6438c3cfdd830ee2a76d0aa52
CRs-Fixed: 2261322
Android Packet Filter 3.0 requires the framework to be able to
read and write into the APF work memory in the Firmware. It
also requires to be able to enable or disable the interpreter.
New WMI commands are defined for read/write/enable/disable
operations.
Complete the implementation of these new commands.
Change-Id: I852d61eb213d9ae530e8a71069144ef35816f5b8
CRs-Fixed: 2184971
In case os_if request times out, free the corresponding
memory allocated for stats event to os_if.
Change-Id: I23bd65f2b79c71070d65b5e4045eaf4e17113354
CRs-Fixed: 2262653
