Micbias value set does not take effect on rouleur.
Shift micbias value to correct bits.
Change-Id: Ice083e3bc30f6e8e3fe7132c633a4043329ccfa5
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
ADM supports certain modules that can have very large calibration sizes,
in such cases the calibration is expected to be persistent in memory.
Add new cal type ADM_AUDPROC_PERSISTENT for this purpose.
Change-Id: If85c0b6675ea7481c7d71d5c0d770bc129332026
Signed-off-by: Ramlal Karra <rkarra@codeaurora.org>
RX Master does not support div2 clk switching as div2_en bit
for rx master is floating. Do not do clk switch for rx master.
Change-Id: Iee1716fe892e792ffd17d0861a807e3711cee5d5
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update the configuration and gain settings as per hardware
sequence recommendation for soundwire haptics usecase.
Change-Id: I09b86026f664fec3105af4a8180168fda457d4fd
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Check for valid pointer before access in wsa883x driver
to avoid dereference.
Change-Id: I1c7c158063d178b489ea1e71be745ed3ca32fb16
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update MSB of sample interval in the frame shape
to avoid misconfiguration.
Change-Id: I05e99bc563f6cdc71c7caf424441c4caa44ec4c6
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update HPHL and HPHR sequence to avoid clicks and pops
by setting the LDIV and RDIV values in HD2
coefficients and increasing ramp time.
Change-Id: Ib47d14255a098511393b4b75392854c8b34dc0d3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Mute is observed in amic record sometimes in concurrency with
sva. This is because if record is over tx0 then digital clk
is not enabled. Enable clk after enabling micbias to resolve mute.
Change-Id: Iba3aa4fade0ac5889218eaee2c5d2c4bd4431d50
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Enable compander based on mixer ctl set for ear path.
Change-Id: Ie6287469f1baa9dba239d369bd5a29ed8e44522f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In order to reduce the LPI memory consumption,
reduce the apps wake up latency from 250msec
to 40msec in LAB module config.
Change-Id: I5451e2b43b81ce7c6f8840f774b74e3cffc0a032
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Remove wsa soundwire device from master device list only during
critical error and not for probe defer.
Change-Id: I5c4f71a4735de4bb459094043d41a6b5c560a6fd
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Pop is heard with special headset with silence record
during SSR. Resolve pop by allowing sufficient time for
wcd937x_reset post SSR and again initialize registers
post SSR.
Change-Id: I80e70a98a72b247dca878673a30651647b676659
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
For bolero 2.1 with SWR_TX in va macro, update SVA fixes.
Change-Id: I250df0fe476bc2c0439ab491a17dea2e7ac18707
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Do not compile audio sources for VM image for lahaina.
Guard the source path against CONFIG_QTI_VM to decide to
compile it are not.
Change-Id: Ib58f2b8c5c26435faf1425ef79a7ece92cdf77c9
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
