With multichannel voice activation support in LSM, it could be possible
that the input media format/hw_params to LSM would be different than
the output media format/hw_params. This change decouples the input
and output hw_params for LSM. The output hw_params are obtained through
ALSA pcm_hw_params operation, whereas the input hw_params are obtained
though the LSM_SET_INPUT_HW_PARAMS ioctl to LSM.
At the same time, the below parameter IDs are added to send the channel
information to LSM service:
- LSM_PARAM_ID_MEDIA_FMT_V2
- LSM_PARAM_ID_LAB_OUTPUT_CHANNEL_CONFIG
Change-Id: Ie53a087b0ec54e83c4eba93a0828f9bdd6cc147d
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Listen v3.0 adds new algorithm and multichannel support. The
input and output of LSM could have different media format,
especially number of channels. Add required support to obtain
input hardware params from userspace. Existing pcm_hw_params
operations will be used to obtain the lsm output hw params.
Change-Id: I3feca50b4b13ece59ceb39787199e2cec17b3cae
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
During unmap of rtac block in ASM, mem_map_handle
address is set to zero instead of the value. Set the
map handle value to zero to avoid issue in freeing the
ion memory.
CRs-Fixed: 2254339
Change-Id: I6584be029d4c8dde235e722149c758df0db9916e
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
New soundwire master driver to support multi master
for Talos/vipertooth.
Change-Id: I2616b940339e8f3d8d120e6705247d7bd1656bac
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
soundwire bus driver changes to support new soundwire
master driver for Talos/vipertooth.
Change-Id: I70e52a72edd80abc72ccb99b29b1a642debec257
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
This change is to add support routing for codec dma
interface backends and LSM front ends.
Change-Id: Ia0d6a5a5969ca1a18ceed2b55b634146ecc3f956
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Send additional port types information from machine driver
to wsa required for new soundwire driver.
Change-Id: Ia3188cfe6e33dd5b219a12900cb0d04ca03fd02c
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add __user attribute for msm_lsm_ioctl's input parameter
"*arg" to explicitly identify it as user space pointer.
Change-Id: I33e8a23cdef9eee9a55b77bb017716ccf2ba5f81
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update QCS405 machine driver to create HW dependent node for AFE
to hold VAD core calibration.
Change-Id: Ied9c11af87df0fb2b419f1e4a9c1e5cc67d84c00
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Update DAI driver to include VAD configuration related mixer
controls for the supported DAIs.
Change-Id: I7c1ff9a30c3afcf9bb66e40283e6909631df9aa6
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Update to AFE native driver to send VAD calibration
to DSP. Add support for per service API version query
in q6core driver.
Change-Id: I6234879054e7b5622a40912da16072fd8dbd83fe
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
New codec dma interfaces have been introduced to connect LPASS and
Codec macros. This change is to add codec dma interface dai driver
and corresponding dais.
Change-Id: I307950ff3cbfe80c966bd9de21803655bb46e05c
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
New codec dma interfaces have been introduced to connect LPASS and
Codec macros. This change is to add support routing for codec dma
interface backends and their corresponding front ends.
Change-Id: I8145921559457c50408d35c90b13d018e1c32c8a
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
New codec dma interfaces have been introduced to connect LPASS and
Codec macros. This change is to add codec dma interface related
updates to Q6 AFE native driver.
Change-Id: Ia3d1e5e80c694c8c4a7f904151adfcb504964b08
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Cancel any pending delayed work in device down call
to ensure no work is scheduled during or after a
SSR/PDR sequence.
Change-Id: I4cc89cb1a9d8be732c978044d4eea3cf6644ec30
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Use hardware default value for boost state in regmap.
Use correct mask for initial value of boost state.
Change-Id: Ia8b707ba0128662d47059d25325693bc8eaff723
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
To add child devices under q6core, update
q6core to support as platform driver.
Change-Id: I5a923d1a16899c03428c8e54701ea1c07653f486
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Fix offset address to use set parameter structure while
copying data from user instead of get parameter structure
for AFE_PORT_CMD_SET_PARAM_V3 case.
CRs-Fixed: 2256728
Change-Id: I61e41f366f365734a47080b79179fbe3021ee8a7
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
On receiving DC detection notification, send an uevent to notify
the userspace.
CRs-Fixed: 2244131
Change-Id: I42b0bb2287d7f1edf5e7c344302a7ea97408ab13
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add a common function handle to send uevents from q6 layer.
Add functions to initialize and cleanup the kernel object required
to send uevents.
CRs-Fixed: 2211324
Change-Id: I9dceb4eb16d6941600455602f78f4f1498171d19
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add support to listen for DC detection event.
Shutdown WSA on receiving DC detection event.
CRs-Fixed: 2244131
Change-Id: Ifecab8bb9862976a647a161bad4c202b6e6459c7
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add support to register with ADSP for DC detection event
in speaker protection module.
Add support to notify audio driver clients when DC detection occurs.
CRs-Fixed: 2244131
Change-Id: Ieb467f62207546a785eac2e9b96ca677e0b10565
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add compile support for bolero codec driver and other
interface files along with macro drivers.
Change-Id: Ifa9c5454eebab1dbebb53d60a7a67458d1e6c8f6
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for VA digital portion to register
as macro to bolero codec. ASoC dapm and dai
functionality of VA macro is associated to
bolero codec itself.
Change-Id: I3c5ae045c0e061bd9aa1281231cf2418093d1169
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for WSA digital portion to register
as macro to bolero codec. ASoC dapm and dai
functionality of WSA macro is associated
to bolero codec itself.
Change-Id: Ida9647274e6a0aa392e131a9b08f83b2520802e5
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update file names of bolero to be compliance
to driver file name convention.
Change-Id: I138d0211803f93152ae7fb01eae68050dada082f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Reset power_active_ref counter to 0 when it is negative to
take digital core out of reset during next session.
Change-Id: I724ffe6e3547655424238ca02a9bf8ac24b101fe
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add qcom,subsys-name for apr driver. Based on the property,
registration of notifier is done for the right co-processor,
from which notification needs to be received.
Change-Id: Id492c8b24d1a4cf0bcab37700a1e9c61c9067041
Signed-off-by: Meng Wang <mengw@codeaurora.org>
