Set/clear correct FE/BE route for LSM in LSM put funtion
to avoid mixer control initial value is not set from userspace
after audio server restart.
Change-Id: Ic415bb51cbaf887c4ddacf9e7062ec28a36674e4
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Make sure to get apr handle before sending a packet
so that it does not end up with no handle to send
the apr packet.
Change-Id: Iaaebee3ddc6c83896e4cb9dc8149d310fc7d67f1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add NULL check before access pointer to avoid dereference.
Change-Id: I2c7408348a0acf1a3801a5869f62bae328858beb
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Disable EN_CUR_DET to fix receiver noise as per hw team
recommendation.
Change-Id: Icbeea920d02279ff845072e54be1c449db7bd2da
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Trigger xt logging getparam at every playback close
and store data. When app queries sys/class node, return
stored values and reset to 0 for some params as per
app requirement.
Change-Id: Ice1a3e9a7e03062390f1c36184a971635e55d450
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add v-validation feature support for set config for
wait time and validation time and get param
for status/vrms result of speaker.
Change-Id: I1bd91fbe17113a21c881e1ec1c735c50a963a692
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In wcd-spi driver, the kzalloc is used to allocate memory for TX and
RX buffer. Those allocations are order4 or order5, which could fail
on some kernels. To avoid potential memory allocation failure, the CMA
region is used for those allocations by dma_alloc_coherent API.
Change-Id: I0a4d6c6b5e0e47f96187563272e63c3a006e469f
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Check buffer size in qdsp_cvs_callback before access in
ul_pkt.
Change-Id: Ic19994b46086709231656ec747d2df988b7a512f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Routing driver searches CAL_TYPE list for a matching
topology and then searches the LSM_CAL_TYPE list if
no entry is found in the first list.
If it so happens that a capture type cal block is
present in the CAL_TYPE list, it will be picked even
though the correct entry is present in the LSM_CAL_TYPE list.
Flip the order to give priority to LSM_CAL_TYPE list.
We expect only LSM clients to populate this list and
also enforce exact match for LSM clients.
CRs-Fixed: 2250684
Change-Id: I2ab3481b43a5d8b059a20cb919ff097fc8cf2774
Signed-off-by: Haynes Mathew George <hgeorge@codeaurora.org>
Excessive logging by pr_err() could cause audio thread to stuck
in the printing session which results PD down notification timeout.
This eventually can cause ADSP PDR failure. Fix this issue by using
pr_err_ratelimited and dev_err_ratelimited to limit the number of
error messages during the ADSP PDR.
Change-Id: I68b617fef53ebd03ba79fd919bffd8c35e6eb048
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Check size of payload array before access in qdsp_cvp_callback.
Change-Id: Ic5ea6686a1a09df75ddd5e6fdcdfbd74efff83d8
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
The wcd-spi-ac (access control) driver exposes character
device to userspace to indicate information regarding
WCD SPI usage. Add uapi header file with the commands
and data expected by the character driver.
Change-Id: I41dfc3181041c7e7a1bad8695fa723d3a965036b
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Check size of payload array before access in qdsp_mvm_callback.
Change-Id: I81d945f963cfb4a3cb26155700b82880d891ec5e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
msm_compr_trigger for next track is updated with
q6asm_stream_open_write_v5 depending on the
avcs_api_version.
Change-Id: I6b3862a7b8e0480fffdcddc2ff0949cf5399d7a6
Signed-off-by: Nidhisha Dhananjayan <nidhis@codeaurora.org>
For codecs like tavil/tasha where the soundwire register access
is through codec bridge, the soundwire bus latency is absorbed
in slimbus io operations, hence do not require extra delay in
soundwire driver for io operations.
Change-Id: If77aa02f0c3c1755916b7a57776115d12e4f08bd
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Also increase the ec ref channel count support to Sixteen from
current max of Eight.
Change-Id: I2297508aedd177580b1c9b2bed3c7c8421507629
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
