During random channel selection after radar, channels 149 to 177 are
not considered as a potential random HT160 channel after the
introduction of the 5.9G channels. This is because, the last 80MHz
band (165, 169, 173, 177) are not added to the list of 80MHz band
list that is used to find the next random channel.
Update the 80MHz band list with 165-177 and update the band count.
Change-Id: Id881adaa07dab07400435d559940f4bdf837eb75
Add big endian version of rxtlv structure. THis is needed since
the structure members are directly accessed by name and hence reverse
order of bitfields have to be defined in case of Big endian mode.
Change-Id: I50ce4bdd482a336ee8d2f394ed2de1a7ddf0be57
Currently error BAR frames are routed to host, but host
doesn't have complete information to check whether these
frames are valid and really action need to be taken or not.
If host updates H.W without validating SSN it is causing
window movement and REO HW aging timeout happening for
next set of RX packets and delay is induced.
To avoid RX packets delay skipping BAR update to H.W
Change-Id: I92c1614993b6985218a453fe528fbd274fab254f
CRs-Fixed: 2995461
In case of split profile, while parsing the other segment
of the non transmitted profile present in the subsequent
MBSSID tag, it is possible that the beacon is corrupted where
the non tx profile length has gone out of bound.
In case of above scenario, the MBSSIE parsing code does not
free up the memory allocated for split_prof_start before
returning, which could possibly result into a memmory leak.
Handling the split_profile_continue bit before non tx profile
length check can avoid this situation.
Change-Id: Iaa491fd2803d88759e74ca5a668dddb9f8a42708
CRs-Fixed: 3023554
Add new QCA vendor attributes to get connectivity and roaming
related parameters from the driver for logging.
Change-Id: I8d4db7e43bcd2f406d124d7224a91338550420f0
CRs-Fixed: 3029276
qal_bridge.c has dependency on kernel bridge APIs and is required only
if DBDC_REPEATER_SUPPORT is enabled.
Remove qal_bridge.o from QDK Kbuild if DBDC_REPEATER_SUPPORT is not
enabled.
Change-Id: I4820742fed3cee3a168375d5bff0667a4bde3ffe
CRs-Fixed: 3030927
The power event received status is set when AFC power event is received
but is not reset when AFC expiry event received.
Reset AFC power event received status on receiving AFC expiry event.
Change-Id: I6e3415682b682e7a0f5d15a190d4cf72f5ff935a
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
Different chipsets are reporting cfreq1 and cfreq2 in different formats in
Spectral reports. This leads to confusion at the user-interface level.
Convert the cfreq1 and cfreq2 representations as follows before sending the
Spectral report to upper layers.
For a contiguous channel, cfreq1 will represent the center of the entire
span and cfreq2 will be 0. For a discontiguous channel like 80p80, cfreq1
will represent the center of the first segment whereas cfreq2 will
represent the center of the second segment.
CRs-Fixed: 3020790
Change-Id: I86e330c9a3a66701f274e20db2d8bc5934608a6b
In reg_set_ap_pwr_and_update_chan_list, before setting the AP power type
check the number of reg_rules present for the input AP power type.
Change-Id: I3af82cf8b7ff6ed7525b5284390361a618da4140
CRs-Fixed: 3030223
Release vdev reference in error cases while
collecting scan radio special vap stats
Change-Id: I030105f62fa8bb67c34c49950012f0e1dbf613a0
CRs-Fixed: 3025050
Add API to lookup pdev object based on hw_link_id and return this with
reference held. Caller is responsible for releasing the ref
Change-Id: I6e3e371462c0d2a4b590b4a5de5c098a72577827
CRs-Fixed: 3026072
There is a requirement to get sequence number and tid for tx
data packets in packet capture mode. These fields are not
received as part of WBM tx completion, but are obtained from
FW in ppdu stats. As WBM tx completion and FW ppdu stats are
two different events, the ppdu_stats of previously sent ppdu
are filled in the radiotap header of current tx ppdu in packet
capture mode.
Enhance code to add required fields such as ppdu_id of tx current
ppdu and ppdu_id, tid, start_seq, ba_bitmap of previously sent ppdu
as extension2 to radiotap header. These fields will be added in
radiotap header only when add_rtap_ext2 is set.
Change-Id: I448a9c03a770b61ab802d855bc5f1a6587bd01b3
CRs-Fixed: 3004472
Fix a compilation error in ucfg_reg_get_partial_afc_req_info, when
CONFIG_AFC_SUPPORT is enabled.
Change-Id: I9834170b08bd72ee4201284c22211e3b1e5fc560
CRs-Fixed: 3029969
For Pine full monitor configuration to FW, HTT config parameters are
incorrect. Make change to use correct config parameters.
Change-Id: I964c8a28cea36b4e1e93c106540412c8cbfc7f29
CRs-Fixed: 3029362
Remove the locking mechanism when getting the link vdevs since it is
causing a deadlock.
Change-Id: I360bd1ad609cfe1d0eb3576b66aeeb93495811fa
CRs-fixed: 3025767
When the host driver is insmod-ed, and first time the pdev object
is created, the AP power mode starts with LPI. When the FW sends the AFC
power values, the Host switches to SP mode.
If 'wifi down and wifi up' happens, all the VAPs are deleted but
pdev object is retained in the memory. Since, during 'wifi down and
wifi up' the FW is reloaded again, the FW starts with LPI always.
However, since pdev object already exists the AP power mode variable
in the regulatory private object has the same old power mode.
To fix the problem described above, update the power mode whenever
the WMI_REG_CHAN_LIST_CC_EXT_EVENT is received from the target.
Change-Id: I7a349e4defcd50cd46117d8ee55bbe8c7c8f7e80
CRs-Fixed: 3028659
Firmware sends some ppdu stats required for packet capture
mode in new ppdu stats tlv HTT_PPDU_STATS_FOR_SMU_TLV.
Add code to parse it if feature is enabled via ini and
send the ppdu stats using wdi event to packet capture
component.
Change-Id: I5567007a91093dd342f37458760b3a61c040b779
CRs-Fixed: 3004476
Since walt is msm-only scheduler group of features,
not upstreamed. Include walt.h header when CONFIG_SCHED_WALT
has been enabled.
CRs-Fixed: 3023820
Change-Id: Ib1aacae83ca4168eff958341f0feebe8ab37a4e7
Some platforms do not support cached descripts for DP Rings.
Add support to set WLAN_CFG_DST_RING_CACHED_DESC to 0 and make
__qdf_nbuf_dma_inv_range as stub if DP_NO_CACHE_DESC_SUPPORT flag is
enabled during compilation.
Change-Id: Ic6b483be25c32f3f3c79b170fb7d7557a232b4ac
CRs-Fixed: 3027649
qal_bridge.c has dependency on kernel bridge APIs and is required only
if DBDC_REPEATER_SUPPORT is enabled.
Remove qal_bridge.o from QDK Kbuild if DBDC_REPEATER_SUPPORT is not
enabled.
Change-Id: I7e8ae6f979f5323b99f4946b13c91c2a816f74a7
CRs-Fixed: 3027649
ACS needs the intersection of SP channel and the channel list in the AFC
response.
Create intersected AFC channel before calling ACS.
Change-Id: I9443edfc4d8b31edf5ae7e040c0743de9a0851b3
CRs-Fixed: 3023930
The function reg_get_partial_afc_req_info() declaration is different from
its definition prototype.
Change-Id: Idd36e1343dd2af1d5ecaf3b8dcbaf7dc6839d560
CRs-Fixed: 3023862
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
When 6G IEEE channel 2 (5935 MHz) is enabled in the master channel list,
and if the channel 1 (5955 MHz) is the input to the API
reg_compute_chan_to_freq, the API returns 0 as the output channel
frequency.
Since the IEEE number 2 is greater than 1 (but in terms of frequency it
is a lesser value), the break condition in the for-loop gets
satisfied, and since the enum of channel 2 is equal to MIN_6GHZ_CHANNEL,
the API returns 0.
To fix this issue, in reg_chan_band_to_freq, handle 6G channel 2 as a
special case by directly returning its frequency, and also
skip it from the search space of reg_compute_chan_to_freq.
Change-Id: Ief79ee2d93f4d547688e10113a8105a763c767f8
CRs-Fixed: 3013255
While appending one of the 6g_master_channel lists (based on power
type) to the master channel list, if the power type is standard power,
intersect the standard power list with the afc power list and append
the intersected list to the master channel list if the afc power
list is available.
Change-Id: I606e765a4abd5cd71cf35a13ac799fdec8e87ffd
CRs-Fixed: 3023853
Host updates BAR info to H.W when out of order or 2K jump
BAR frame is received. But some AP's frequently transmitting
out of order BAR frames even before reception of all the
frames in the current window, if station updates window
and SSN based on BAR frame, RX frames sequence number in
older window range which are yet to be received suffers
REO aging timeout and causes RX packet delay to avoid
this skipping BAR update to H.W conditionally.
Change-Id: If56571ffc0dc0880d7104ea3bb193ed9766124dd
CRs-Fixed: 3015643
Add a regulatory dispatcher API to fetch the value of AFC action
from the ini config.
Change-Id: I053262f98991a656d1919817ce37227202a46bc3
CRs-Fixed: 2997899
Currently the AFC request buffer is being freed twice in
reg_free_expiry_afc_info and tgt_afc_event_handler.
Make changes to free the AFC req buffer only once.
Change-Id: I6d0f5c783a124da40eae6166132f7d7132cf76e4
hw_link_id is unique across psoc to identify pdev in multi-soc ML cases.
Exract hw_link_id from mac_phy_cap and provide APIs in target_if to set
and get this for pdev
Change-Id: I9dcc4c1e4b515e83151ca88f5f026c0dd0b04646
CRs-Fixed: 3023496
CE 12 and 13 is assigned for CV prefetch. Set attribute flag for these
CE to zero as per current requrement from FW on Emulation.
This may be changed to different value based on future requirement.
Change-Id: I70073aa45b6999a42ed230835a2a7dd7b650edad
CRs-Fixed: 3025570
While parsing MBSS IE split profiles, bssid copy flag
is not reset in between sub element parsing resulting
in skipping the bssid copy for next non tx profile.
Reset skip_bssid_copy flag for each sub element parsing
so that correct bssid is copied for next non tx profile
CRs-Fixed: 3019298
Change-Id: I429190b21a3ddafdc75a73e8b063f6b6f629492a
Add support for AFC specific Host service flags to switch
between LPI only and SP+LPI, disable AFC timer and request ID checks
in target.
Change-Id: I34d6adcad6e4a2cd6383c941ed07b98059daeed0
Since target already converts RSSI from SNR to dBm for QCA6490 and
WCN7850, so don't convert them again in host side.
Change-Id: Ie35f3821a802f2e65b61f4891f2ca9c632fa1477
CRs-Fixed: 3024119
Add regulatory functions to handle the WMI_AFC_EVENTID. This
includes processing the AFC power information received from the FW,
and constructing the AFC channel list in the regulatory component.
Change-Id: I5da8fc7faae847476f88ff35b20e6444115af7f1
CRs-Fixed: 3023789
When getting rnr IE information, instead of getting rnr pointer through
input parameter, we can just return rnr pointer.
Change-Id: I57f683eb86bb813018a38fa3a6286e9b6e40037f
CRs-Fixed: 3025194
Add a QCA vendor attribute to configure the driver to use
roam band set by userpace. This attribute is also used to
get the configured roam band from the driver.
Change-Id: I5ea7f9d12b2a01e1b4baa43e46342af34bebba49
CRs-Fixed: 3009747
Add host WMI APIs to send WMI_PEER_ADD_WDS_ENTRY_CMDID,
WMI_PEER_REMOVE_WDS_ENTRY_CMDID, and WMI_PEER_UPDATE_WDS_ENTRY_CMDID
to the Fw.
Change-Id: I32afdac7c366b647ee3196bcb76531295e640b8b
CRs-Fixed: 2997227
In few of the scenarios, as part of sync complete handling mld_dev_context
lock is been acquired, which causes deadlock as it is already taken before
dispatching the event.
Hence get the vdev list under lock and reference taken and then dispatch
mlo_sync_complete individually.
Change-Id: Id23dba89276ecaadb02cd3a39a66b4fca3f97c7c
CRs-Fixed: 2924329
Add the following vendor attribute to indicate the bandwidth to be used for
Spectral scan operation.
- QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BANDWIDTH
CRs-Fixed: 3024152
Change-Id: I8ffc5f4d0106cb293ac81408e3b691fc29808080
Use CONFIG_CNSS_OUT_OF_TREE to control if CNSS family drivers are
built from in-kernel-tree source or out-of-kernel-tree source since
the exposed header files will be in different paths. This is also
for backward compatibility.
Change-Id: I698492f175ea140e6854c372f366a63f36de24c9
CRs-fixed: 3022556
When kernel calls driver callback to get stats, dev_get_stats()->
ndo_get_stats64() .Host driver allocates memory using
kmalloc (size, GFP_KERNEL) routine,
but as ndo_get_stats is under RCU lock but not in interrupt
context(in_irq = 0, in_interrupt = 0, irq_disable = 1),
qdf_mem_malloc () uses ‘GFP_KERNEL’ to allocate memory,
leading to backtrace.
As per kernel doc
(https://www.kernel.org/doc/Documentation/networking/statistics.rst),
while in ndo_get_stats64 () API, driver should not calling a routing
which can sleep. Use atomic variant of qdf_mem_malloc() to fix this.
Change-Id: I3585b93d227a36b4b01c9c4f72d878c6cdb44cd4
CRs-Fixed:3020603
