Add WMI scheduler thread context execution framework
to process firmware events in the common project.
Change-Id: If56a4767ee9428d2f93d54ccbf5a8bb17e89e0f4
CRs-Fixed: 2554727
Add a qdf counter to know number of qmi stats requests. Reset the
counter when WoW is exited.
Change-Id: Ie0c51fbd6eb2e7530dba01912443e7fc85726e52
CRs-Fixed: 2539999
Dump channel frequency and channel tx power before channel
list sent to FW by WMI_SCAN_CHAN_LIST_CMDID.
The channel and tx power log can be processed
by script to do validation.
Change-Id: I20105aff6f4bba6f8ef1a00c2986bf5a3cffc635
CRs-Fixed: 2548256
Due to channel number ambiguity with introduction of 6Ghz support
policy manager APIs are updated to use frequency values instead
of channel number. Update set pcl WMI handling to adapt for frequency
usage.
Change-Id: I69bac781036ed9faee8842190d9bf19abca3ec61
CRs-fixed: 2540002
Add support to scan for the 6GHz band capabilities
IE and parse the IE. Added peer assoc param for updating
the minimum data rate advertised by the peer in 6GHz
Opration information.
Change-Id: Iebb4379d321832f3ed2bcd3174a54843fa2d497c
In tgt layer, rssi_stats are copied by comparing the vdev id
filled in the target layer and last reqested stats vdev id.
But in target layer api, target_if_cp_stats_extract_vdev_chain_rssi_stats
vdev id is not filled and that can lead to wrong stats in the upper
layers.
Update vdev id in the rssi stats.
Change-Id: I6a8bd032152b43b90ffd4acfc760e218bf4bba5b
CRs-Fixed: 2530148
If more than MAX_NUM_CHAN_PER_WMI_CMD are present, wmi buffer size can
exceed the maximum allocated buffer size. So iterate over the channel
list, and send multiple messages till channel list is empty. Also check
if 6 ghz channel is a PSC channel and mark channel flag accordingly.
Change-Id: I977a2d220c750cec1f261377b3838360bd8c0df3
CRs-Fixed: 2522763
TLV and non-TLV definitions of vdev mgr ops are in component_dev,
they are carved out to a separate file in cmn_dev/wmi for adapting
target_if/vdev mgr component, they are made part of same file
which conflicts tlv design. Create separate file for tlv ops
to definitions and enable respective pointers.
Change-Id: I1e67c7c59adee61b4eb46acb8f51a7a6c385f056
CRs-Fixed: 2517009
Add auto PM tag for WMI_WOW_SET_ACTION_WAKE_UP_CMDID command
such that rrm action frame feature can be enabled for runtime pm
as well.
Change-Id: Ife57c127b1af93632722c9b0a861ecf6ab99fda2
CRs-Fixed: 2513510
In direct buffer rx component, it required to pdev id and mod id match
at same time, so use new pdev id conversion backup and convert pdev id
actually.
Change-Id: If53bde84564becd91f2dd0e20b002da2961dccd2
CRs-Fixed: 2528401
Add support for WMI over QMI to reduce power consumption for
periodic stats report.
Change-Id: Ic57b2bd18be803c97ffeea2e0073751d31e02202
CRs-fixed: 2521835
This reverts Change-Id: I6dd3abd61730d8f17d74a11a42978a64853136e5.
wmi_pdev_stats_v2 and wmi_pdev_stats_v1 are defined depends on
specific target, can’t use them directly in our common code,
must use wmi_pdev_stats instead. And use different config to
enable v1 or v2 pdev stats.
Change-Id: I6ad11d723ac0c9ed55a266c204957af706045d3d
CRs-Fixed: 2521638
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As a part of above requirement, in the existing WMI interface handlers
and related functions, wherever missing, add frequency attributes to
identify unique channel operation.
Change-Id: I7c7542aa8488b4c55764c733590b77c64c397029
CRs-Fixed: 2517900
vendor_roam_score_algorithm is added in order to
enable/disable roam score algorithm.
With this roam score Algorithm, AP score will be calculated
based on below equation:
AP Score = (RSSIfactor * rssiweight(0.65)) +
(CUfactor *cuweight(0.35))
Add vendor_roam_score_algorithm inside scoring_param
and inside function send_roam_scan_offload_ap_profile_cmd_tlv
populate score_param->vendor_roam_score_algorithm_id
from ap profile.
Change-Id: I21bb788d96a34c3bf237f0d304e51a7f4664d2ee
CRs-Fixed: 2517492
Since callers who log runtime PM resume source may be invoked within
spinlocks or in other atomic contexts, log using info level will log
to console as well which may result overhead. Log using debug level
which will be logged to buffer only to avoid such issues.
Change-Id: I0497c7b7528200af9a34d816865e9bbbfd8bacf2
CRs-fixed: 2518800
In send_set_del_pmkid_cache_cmd_tlv(), pmk_info is
dereferenced to copy vdev_id, flush flag and other
parameters. Add null pointer validation for pmk_info before
dereferencing pmk_info.
Change-Id: If44acc76d7e0e5d4387f089f8ec5684fc4648665
CRs-Fixed: 2520041
Enable DISA WMI commands for FIPS CCM test
by moving DISA WMI code to unified tlv files.
Change-Id: I90e82fef0e7e365faa6e15d555bf4d431214e14a
CRs-Fixed: 2516897
Currently the host gets service_ready_event and service_ready_ext_event
during the init sequence as a part of handshake with firmware. As the
size of the service_ready_ext_event exceeds on adding further
parameters, new event is created.
Add support for WMI_SERVICE_READY_EXT2_EVENT to be processed after
WMI_SERVICE_READY_EXT_EVENT based on the service bit
WMI_SERVICE_EXT2_MSG.
Also add support to extract the reg db/bdf version information that
comes inside the ext2 event.
Change-Id: If0b57af362e7eb653f9189b912ec1dd3efb0f731
CRs-Fixed: 2501132
Set target if vdev start resp handle as public to be registered
when wma open.
Remove wma_remove_vdev_req in ocb, don't use wma vdev cmd queue
and timer.
Change-Id: I2cd48ddd700ed1cde34231c22c02e0e54d4df5e3
CRs-Fixed: 2516536
Reduce the log level from err or info to debug so that logs
are not printed on console.
Change-Id: I0d33c2a8f5b4bb4974656ac0d1eb6713a74cb5f4
CRs-Fixed: 2516287
Configuration for Issue:-
DUT configuration:-
1. Configure DUT's country as US where channel 165 does
not support channel bandwidth of 40 mhz.
AP Configuration:-
1 Configure the AP in a country where channel 165
supports channel bandwidth 40MHZ.
Scenario of the issue:-
1.Connect to a diff AP on some channel x with same SSID,
and then roam to this AP.
Observation:-
The DUT would connect in 40 mhz to this AP instead of 20Mhz,
which violates the DUT's country reg rules.
Expectation:-
The DUT should re-connect only in 20Mhz on channel 165, or
only in max BW supported by reg in that country.
Issue:-
The DUT does not consider the max bandwidth allowed for the channel
in the country configured, and allow the re-association only
in the respective bandwidth.
Fix:-
Send the max BW supported by the channels in the current
reg domain to the FW so that it considers the max BW of the
channel and AP capability and then roam in the respective BW
only.
Change-Id: I977090c58e378e83cb5a3ee84a72afd018e8c428
CRs-Fixed: 2508187
Add dfs_set_cfreq2 flag (indicating secondary DFS set) in addition to
dfs_set (indicating primary DFS set) flag in scan channel list update
params to be sent to FW.
Change-Id: I67670f1d5b128c57c0fad03d9f9b14a99f1d38f6
CRs-Fixed: 2496923
If the FW sends a pktlog checksum in the FW ready event, store that in
pl_dev and use it as buf_hdr.version in the pktlog buffer header.
Also, use a new magic value to identify the checksum in the
buf_hdr.version field.
If the FW does not send the checksum, then the existing magic number
and standard version number would be maintained.
Change-Id: Ib08c093a9b54495a2c5b7e0e163207f2b1eb4ce2
CRs-Fixed: 2508828
Userspace may configure the roam trigger bitmap to WLAN host
driver to enable particular roam trigger reasons. Convert the
bitmap to the format of firmware trigger reason bitmap and send
to firmware.
Change-Id: I9fc78c180bd25c995dfd380f80e52e3eb302fce3
CRs-Fixed: 2507611
The supplicant sends del_pmksa command to delete the pmk,pmkid
for a particular bssid. In this command pmk_len will be 0.
In send_set_del_pmkid_cache_cmd_tlv() the host driver currently
checks the pmk_len to set WMI_PMK_CACHE_OP_FLAG_FLUSH_ALL.
If pmk_len is 0 WMI_PMK_CACHE_OP_FLAG_FLUSH_ALL is set, which
is not correct. pmk_len will be zero in both the flush and delete
cases.
So add a new flag is_flush_all which will be set to true when the
supplicant sends pmksa flush command.
At WMI based on this flag set the flush flag to the wmi cmd.
Change-Id: I7626c500721a4b8cccbb21a08d4235c041456d1b
CRs-Fixed: 2502478
Full scan period is the idle period in seconds between two
successive full channel roam scans. Configure this to firmware
along with scan period as part of roam_scan_offload request
Change-Id: I3d629f0735b50a5b8116b422779ae423c15cae1d
CRs-Fixed: 2507604
Set ssid and ssid_len when restart sap vdev. When hostapd set
ignore_broadcast_ssid to 1(zero-len) or 2(zero-content), when we force-scc
or setChanChange to restart sap vdev, if not set ssid and
ssid_len(default 0) in vdev start wmi, then firmware will reply
broadcast probe request since the ssid_len in broadcast probe req is 0
which matches the condition that firmware send probe response, however,
we should not reply with probe response.
Change-Id: I56580529e2b0db673c6b28c75094a7fd225cba77
CRs-Fixed: 2506391
Add cfr_enable flag in Probe response, so that FW can start CFR
capture for particular client.
Change-Id: Id38b61317384a069308de4931463f1aef4f65f38
CRs-Fixed: 2502030
There are 2 issues in the driver:
1. Currently host incorrectly fills the pdev id value as 0
in stats request, If host sends the pdev id as 0 for
stats request then FW sends the stats for all the pdevs.
2. If host requests pdev stats with pdev id as 0,
FW can send multiple events for each pdev stats
if one event buffer is not sufficient to fill the stats
for all the pdevs. Curent host logic doesn't process
multiple pdev stats events.
Address above 2 issues with below fixes:
1. Send correct pdev id to FW in the stats command.
2. Add a logic in host to process all the pdev stats events
received as part of the pdev stats request.
Change-Id: I5b5bfcda2f30fb32749c653c6524ecbd2edc44a4
CRs-Fixed: 2503273
