vendor_roam_score_algorithm is added in order to
enable/disable roam score algorithm.
With this roam score Algorithm, AP score will be calculated
based on below equation:
AP Score = (RSSIfactor * rssiweight(0.65)) +
(CUfactor *cuweight(0.35))
Add vendor_roam_score_algorithm inside scoring_param
and inside function send_roam_scan_offload_ap_profile_cmd_tlv
populate score_param->vendor_roam_score_algorithm_id
from ap profile.
Change-Id: I21bb788d96a34c3bf237f0d304e51a7f4664d2ee
CRs-Fixed: 2517492
Enable DISA WMI commands for FIPS CCM test
by moving DISA WMI code to unified tlv files.
Change-Id: I90e82fef0e7e365faa6e15d555bf4d431214e14a
CRs-Fixed: 2516897
Currently the host gets service_ready_event and service_ready_ext_event
during the init sequence as a part of handshake with firmware. As the
size of the service_ready_ext_event exceeds on adding further
parameters, new event is created.
Add support for WMI_SERVICE_READY_EXT2_EVENT to be processed after
WMI_SERVICE_READY_EXT_EVENT based on the service bit
WMI_SERVICE_EXT2_MSG.
Also add support to extract the reg db/bdf version information that
comes inside the ext2 event.
Change-Id: If0b57af362e7eb653f9189b912ec1dd3efb0f731
CRs-Fixed: 2501132
Configuration for Issue:-
DUT configuration:-
1. Configure DUT's country as US where channel 165 does
not support channel bandwidth of 40 mhz.
AP Configuration:-
1 Configure the AP in a country where channel 165
supports channel bandwidth 40MHZ.
Scenario of the issue:-
1.Connect to a diff AP on some channel x with same SSID,
and then roam to this AP.
Observation:-
The DUT would connect in 40 mhz to this AP instead of 20Mhz,
which violates the DUT's country reg rules.
Expectation:-
The DUT should re-connect only in 20Mhz on channel 165, or
only in max BW supported by reg in that country.
Issue:-
The DUT does not consider the max bandwidth allowed for the channel
in the country configured, and allow the re-association only
in the respective bandwidth.
Fix:-
Send the max BW supported by the channels in the current
reg domain to the FW so that it considers the max BW of the
channel and AP capability and then roam in the respective BW
only.
Change-Id: I977090c58e378e83cb5a3ee84a72afd018e8c428
CRs-Fixed: 2508187
If the FW sends a pktlog checksum in the FW ready event, store that in
pl_dev and use it as buf_hdr.version in the pktlog buffer header.
Also, use a new magic value to identify the checksum in the
buf_hdr.version field.
If the FW does not send the checksum, then the existing magic number
and standard version number would be maintained.
Change-Id: Ib08c093a9b54495a2c5b7e0e163207f2b1eb4ce2
CRs-Fixed: 2508828
Userspace may configure the roam trigger bitmap to WLAN host
driver to enable particular roam trigger reasons. Convert the
bitmap to the format of firmware trigger reason bitmap and send
to firmware.
Change-Id: I9fc78c180bd25c995dfd380f80e52e3eb302fce3
CRs-Fixed: 2507611
The supplicant sends del_pmksa command to delete the pmk,pmkid
for a particular bssid. In this command pmk_len will be 0.
In send_set_del_pmkid_cache_cmd_tlv() the host driver currently
checks the pmk_len to set WMI_PMK_CACHE_OP_FLAG_FLUSH_ALL.
If pmk_len is 0 WMI_PMK_CACHE_OP_FLAG_FLUSH_ALL is set, which
is not correct. pmk_len will be zero in both the flush and delete
cases.
So add a new flag is_flush_all which will be set to true when the
supplicant sends pmksa flush command.
At WMI based on this flag set the flush flag to the wmi cmd.
Change-Id: I7626c500721a4b8cccbb21a08d4235c041456d1b
CRs-Fixed: 2502478
Full scan period is the idle period in seconds between two
successive full channel roam scans. Configure this to firmware
along with scan period as part of roam_scan_offload request
Change-Id: I3d629f0735b50a5b8116b422779ae423c15cae1d
CRs-Fixed: 2507604
Add cfr_enable flag in Probe response, so that FW can start CFR
capture for particular client.
Change-Id: Id38b61317384a069308de4931463f1aef4f65f38
CRs-Fixed: 2502030
Add support for OWE and SAE roam target capability.
Add event mapping for the tgt event
WMI_ROAM_PREAUTH_START_EVENTID.
Add changes to send WMI_ROAM_PREAUTH_STATUS_CMDID after
the SAE external authentication event is received.
Also for SAE/OWE/802.1x, the key management offload
needs to be enabled by default as PMKSA caching if
set_pmksa is received from the supplicant. So remove
the additional key management offload check so that
OKC and PMKSA is enabled by default for SAE and OWE.
Change-Id: I01d3a07e2ce60e25ea8624c030c6a5802205566d
CRs-Fixed: 2491042
WIN and MCL both uses common targer_if code for vdev manager.
So legacy code and "CMN_VDEV_MGR_TGT_IF_ENABLE" macro is removed.
Change-Id: I2984ae44f3a7cfa01b8f1455353d09deb4db5759
CRs-Fixed: 2503804
This feature enables user to change HW mode dynamically
from DBS to DBS_SBS mode and vice-versa. Currently, HW
mode configuration is only possible through INI setting
requiring a subsequent reboot.
Relevant WMI changes are:
1. Relocate API wmi_unified_soc_set_hw_mode_cmd from
wmi_unified_sta_api.c to wmi_unified_api.c
2. Define API wmi_unified_extract_hw_mode_resp to extract
FW response
3. Parse and store new dev-cap fields wireless_modes,
low_2ghz_chan_freq, high_2ghz_chan_freq, low_5ghz_chan_freq,
and high_5ghz_chan_freq.
Change-Id: I49f975e7c5abc8503b651a3ebd4d56b23af915db
CRs-fixed: 2490212
Support to Enable/Disable multi group key and configure
maximum number of group keys.
Change-Id: Ie6ce2a38d0ad04a47f966fc281f35a8af7125447
CRs-Fixed: 2490599
VLAN group keyix is greater than WLAN_CRYPTO_MAXKEYIDX
Each VLAN will have separate group key in single VAP.
CRs-Fixed: 2490599
Change-Id: I585b2deaa13da337c5df7b55ec8e4672221e4edb
Add WMI pdev param to wmi_unified_sed_pdev_param command. This adds
support to enable spatial reuse on a per access category basis.
Change-Id: I501f2a18c2eb7245f4d6c1be253e1b08a3de8bd6
CRs-Fixed: 2502282
Because newest firmware codes already been changed, the previous
coex configure command are invalid. Firmware need host driver
to enable WMI_SERVICE_THREE_WAY_COEX_CONFIG_LEGACY service during
wlan init. Add a new parameter "gThreeWayCoexConfigLegacyEnable" to
initial config file. If this parameter value is zero,set coex
priorities command will return error.
Change-Id: Ief1617e2ba5363e276c55135198613a0e54b71d5
CRs-Fixed: 2482742
Add support to read the RF characterization WMI event
and parse each individual TLV containing the channel's
center frequency, bandwidth and RF characterization
metric.
Also, remove the support for reading the RF
characterization metrics from the extended
service ready WMI event.
Change-Id: I560583f9304005282c09a27f47c8d5c2778b1645
CRs-Fixed: 2487415
WMI functions called from target_if are present at WIN code. So these
wmi changes are moved to common code, so that MCL and WIN both use.
MCL needs this wmi code for target_if vdev conversion.
Change-Id: I6f3653ea0fad14f3cdbb32a8dc65e5146ce0a5c8
CRs-Fixed: 2492577
Use CONFIG_WMI_BCN_OFFLOAD instead of CONFIG_MCL to
include wmi_unified header file.
Change-Id: I0cc7a4958700c82c7d3e55c965ccac2451b64fd3
CRs-Fixed: 2490681
Remove CONFIG_MCL for Beacon buf send WMI command APIs.
And move them under WLAN_WMI_BCN.
Change-Id: Ie5053334bd7498cb9dd84dbc515ffd3414a4ad32
CRs-Fixed: 2483567
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: Id806638bf8c53c65b32177969d965290da5701b9
CRs-Fixed: 2477337
Add WMI support for vdev delete all
peer request which will replace individual peer
delete of peers under a vdev during vdev down.
Change-Id: Ia41ae5fbf96a75d2a3e608564742d2a43e0ed2cc
CRs-Fixed: 2456858
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(set 2)
Change-Id: I06a89adaf15c6b398dbc901518aa83927b7ca16a
CRs-Fixed: 2479298
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(wmi_handle_t)
Change-Id: I7c6dce564f34352c75e0b9d0c90591de625f1959
CRs-Fixed: 2479299
Set HE capability support in scan channel list command to enable
HE IEs probe request frames.
Change-Id: Ia8836f033ee010ba21f82fdc21da5085e70bc0a4
CRs-Fixed: 2478069
Featurize PKTLOG cmd handle under feature flag FEATURE_PKTLOG
as part of CONFIG_MCL cleanup.
Change-Id: Iae8c7e7caad001d7d37a8e17c1eb892f96009066
CRs-Fixed: 2467198
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447363
