the enum for subchannel marking pdev param is after the
maximum value. Re-enumerate the enum so that the pdev param max
points to the last value.
Change-Id: I9ecf616a13b3b73b3aafb0f6dfdfbf6eda29f4dd
CRs-Fixed: 2334258
When CONFIG_MOBILE_ROUTER is enabled there are build failures
due to improper featurization of NAN, so fix the featurization.
Change-Id: I6bc11fb82394c2d32b328cb5d50ff974051755e1
CRs-Fixed: 2353170
Introduce a new wmi_send pdev param to enable/disable
"Subchannel Marking" in Firmware (only in Full Offload)
Change-Id: I3cd4f4f13ebca72c4505b6195cc8dc4856d41671
CRs-Fixed: 2334258
Current HTT_H2T messages from host driver does not have
consistency in message length set by host driver. Some
message types include HTC header length also within the
message length, while other types have message length
itself only, which causes difficulty in handling message
length in FW.
Change-Id: I885a21530a2d8f852387ae54cf7ee0751aad2516
CRs-Fixed: 2345075
Remove the unused fields from WMI unified vdev_start_params structure.
The channel information duplicated in vdev_start_params and
it sub structure channel is removed and all implementations
can use the channel sub structure directly.
Change-Id: I47cf4c4223111b6f564ec8336dbfcda4592e8e0c
CRs-Fixed: 2350505
Add flags WMI_HOST_FW_FEATURE_VOW_FEATURES and
WMI_HOST_FW_FEATURE_VOW_STATS which will be sent
to firmware to enable VOW stats.
Change-Id: I7829327ac21406af309f21b79f9f040687997275
CRs-Fixed: 2340765
Adding two members including tx sgi_count in
host peer_extd_stats structure which is received from
the fw and populated to upper layer along with adding two
members to cdp_rx_stats.
Change-Id: Id45b2d0042d01771ac74a906d72c369c3dc31394
CRs-Fixed: 2147922
Requirement to provide various msdu retry stats to host:-
1. successfully transmitted msdus
2. Retried msdus
3. msdus retried for more than once
4. failed msdus
Change-Id: I4cd7dfceae16b4223df605fa174299858a8651c8
1. Send add random mac addr rx filter WMI command
to target
2. Add/Del the active random mac addr entry
3. Clear random mac addr from target if not active
Change-Id: I9dcbdc20b76d9865da7a8db6ee013bf5e44e4407
CRs-Fixed: 2322097
Provide WMI support for AP channel switching enhancements.
As part of FR50393, AP is provided with the ability to notify
capable connected peers to follow it to the new channel bandwidth.
This change provides WMI support for sending required parameters to
the firmware to update the peer list internally with the MAC address
of the capable peer along with it's new channel width.
Change-Id: I0696efd2b1c883d15de23364677050618f114743
CRs-Fixed: 2316625
This commit contains the following changes related to FR49350:
usenol pdev param declaration and implementation of wmi cmd to send
the param to FW.
Failure status code declaration for scan and vdev start.
CRs-Fixed: 2328894
Change-Id: I5d3bfe758aeb9907193b6f626582b70413f5381c
In the existing converged component, WMI TLV APIs are implemented in
a generic manner without proper featurization. All the APIs exposed
outside of WMI are implemented in wmi_unified_api.c and all the APIs
forming the CMD or extracting the EVT is implemented in wmi_unified_tlv.c.
Since WIN and MCL have a unified WMI layer in the converged component and
there are features within WIN and MCL that are not common, there exists a
good number of WMI APIs which are specific to WIN but compiled by MCL and
vice-versa. Due to this inadvertent problem, there is a chunk of code and
memory used up by WIN and MCL for features that are not used in their
products.
Featurize WMI APIs and TLVs that are specific to MCL -
- DSRC
- NAN
- P2P
- PMO
- roaming
- concurrency
- STA
- Generic MCL specific WMI (STA)
Change-Id: I03a68b0db30a3aa585b269ab0a1745b37bc7e0b7
CRs-Fixed: 2316935
FR: TDMA Support for Wave2 Radios (host support)
Added a wmi cmd for configuring the interval between successive sifs
trigger frames given by the user app. Added a separate wmi cmd instead
of wmi param with reference to further scope.
Change-Id: Ifa778a761e3495ef7abab5f63a49661b307034ae
CRs-Fixed: 2330484
While handling WMI_GTK_OFFLOAD_STATUS_EVENTID, QDF_BUG()
can occur in pmo_tgt_gtk_rsp_evt->pmo_psoc_get_vdev if
vdev_id is out of range. As the value is directly from
WLAN FW and can be outside the trust boundary.
Add sanity check for vdev id once get parameter from
wlan fw.
Change-Id: I335df52fece39c1a51a556ba4678bd43f470673a
CRs-Fixed: 2321523
Add host WMI support for EAPOL minrate resource configuration.
Through the use of the global.ini configuration parameter -
eapol_minrate_set and eapol_minrate_ac_set, the user can set EAPOL
frames to be sent in minimum rate in tunnel mode. In addition to
this, the user can also select between the 4 ACs (BE, BK, VI, VO)
to send the EAPOL frames.
The changes are reflected in the target resource config which
is sent to the firmware.
Change-Id: Ib9a264b64305bf43708c3c2af3ff254b6cc28477
CRs-Fixed: 2298020
In the existing converged component, WMI TLV APIs are implemented in
a generic manner without proper featurization. All the APIs exposed
outside of WMI are implemented in wmi_unified_api.c and all the APIs
forming the CMD or extracting the EVT is implemented in wmi_unified_tlv.c.
Since WIN and MCL have a unified WMI layer in the converged component and
there are features within WIN and MCL that are not common, there exists a
good number of WMI APIs which are specific to WIN but compiled by MCL and
vice-versa. Due to this inadvertent problem, there is a chunk of code and
memory used up by WIN and MCL for features that are not used in their
products.
Featurize WMI APIs and TLVs that are specific to WIN
- Air Time Fareness (ATF)
- Direct Buffer Rx (DBR)
- Smart Antenna (SMART_ANT)
- Generic WIN specific WMI (AP)
Change-Id: I7b27c8993da04c9e9651a9682de370daaa40d187
CRs-Fixed: 2320273
Fix the compilation error in vdev state machine and make state
transition logs from debug to info.
Change-Id: I7d7975931232f041206bdb64c639456bf9327b3f
CRs-Fixed: 2321726
FW generates too many diag events and these diag events
also come on CE-2 together with other critical control
path WMI events and easily over-run useful control path
WMI RX even log buffer. Separate WMI diag rx event loggig
in a separate log buffer such that useful control path WMI
log event buffer is not over-run.
Change-Id: I89b5d88036bc9d7e57e8e16858bc556be4e2ed41
CRs-Fixed: 2318083
Register WMI with wbuff for pre-allocation of
skbs. Register at wmi_unified_attach() and
de-register at wmi wmi_unified_detach().
Change-Id: I9d6df1a8480324dd2a258de12672669a8fbe8940
CRs-Fixed: 2313935
Create and send user configurable ini for max number of roam preauth
retries and roam preauth no-ack timeout to the firmware.
Change-Id: I0343cb29952286d9b42a69136fc6353cd86e4752
CRs-Fixed: 2286079
wmi_mtrace is defined as static in wmi_unified_tlv.c and
used in TLV functions, but some TLVs need to be featurized
and moved to separated TLV files. Need to export wmi_mtrace
for external use.
Change-Id: I9459ec01c9cd4a89f3544d6a9831acba56e6a278
CRs-Fixed: 2314779
Host changes to enable HTT version 2 messaging for
PEER map and unmap in FW and changes to handle these
messages in host
Change-Id: Ifbe478212bbbc9c9ea1c1e4791c7a78407c376cc
Currently only 16 bytes of wmi command/event messages are logged
excluding wmi header information.
By enabling WMI_EXT_DBG whole command/event messages can be dumped
using qdf debugfs apis. This will help if it is needed to
collect whole command/event messages information.
Change-Id: I72dff1279b1145b8d2ee415db97656f457c0136f
CRs-Fixed: 2309286
Make the HECAP and HEOP changes for 11ax Draft3.0.
Draft2.0 support can still be enabled by unsetting
SUPPORT_11AX_D3 in config.unified.wlan.profile.
Change-Id: I0c0fd885a43b672baca61011b75a51526481b1ee
CRs-fixed: 2294235
This change is required as a part of setting sifs_rate in the
target through wmi command from host for legacy chipsets.
Change-Id: Ia3ed8a6d33fcb31b290129e1302dfc0000ad4626
CRs-Fixed: 2031293
Add wmi layer support to get firmware roam scan statistics which includes
scoring of roam candidates, channels, old and new bssids etc.,
Change-Id: I3a0aafbe66d12eea40e71ceb4c7c3a60b9d6e04f
CRs-Fixed: 2203904
Add implementation to enhance structure
corresponding to WMI_DCS_INTERFERENCE_EVENT_ID
handler in cp stats component which hold
secondary 40 and 80MHz utilization
which are required parameters of Extended BSS IE
Change-Id: I1c471608394d5c395632742098d2c92fc02ec238
CRs-Fixed: 2298073
In wmi_unified_cmd_send() function, pass function name and
line number of caller and log the same in case of failure,
this approach helps to remove error logs in caller function
there by reducing text segment.
Change-Id: Ib70d55959087021c4495c175d5363375037afe00
CRs-Fixed: 2281983
In wmi_buf_alloc() function, pass function name and
line number of caller and log the same in case of failure,
this approach helps to remove error logs in caller function
there by reducing text segment.
Also add wmi_nofl_* macros.
Change-Id: Ib1ac8bf2bbcefa7f0015aff2733d3dc4773b185d
CRs-Fixed: 2281983
