After roaming, old peer is deleted and new peer is created,
rx tid queue of new peer need set up again.
In dp_rx_tid_setup_wifi3, if CM is in ROAMING state,
dp_peer_rx_reorder_queue_setup isn't called, REO queue descriptor
isn't configured correctly by host for FW to do reorder/pn check.
To fix it, in dp_rx_tid_setup_wifi3, if CM is in ROAMING state
and not ROAM_START substate, but ROAM SYNC state after roam sync
event received, dp_peer_rx_reorder_queue_setup still can be called,
rx tid queue of new peer will be set up.
Change-Id: I34fbb60ad509a0bc70e112c7ec53a862c8f9ce2d
CRs-Fixed: 3090061
Currently there is no provision to get the calibration failure
information from the driver. Because of this it is getting difficult
to debug the calibration failure issues.
To simplify the calibration failure issue debugging, add support to
parse calibration failures events in the driver.
Change-Id: I6d831804cca259862fea3e8bb4af33d556138d43
CRs-Fixed: 3078926
Currently, Host is not caching the response status for the set HW mode
request. Without this status, it is difficult to debug HW mode mismatch
between host and FW when the logs are not available during the set HW
mode command.
To address this, cache the set HW mode response status.
Change-Id: I61b935d54648bc80901bfe7127227ffaa8d7cd7b
CRs-Fixed: 3076445
Instead of the wma macro use the wmi macro to validate the max
supported arguments for the unit test command.
Change-Id: Ia6b8e5a57f3f1d4ca14efddd8c16ff5d7931cad8
CRs-Fixed: 3070809
FW sends lower band end frequency filter in service ready
ext2 event.
Frequency Info for every supported mode gets updated in
wma_update_hw_mode_list when service ready ext evt is
received.
Although, FW sends lower band end frequency filter in
service ready ext2 event.
So, update SBS Frequency Info when Service ready ext2 evt is
received.
Change-Id: Iefe1e601bffaba877979e7ce42a32763b61293c2
CRs-Fixed: 3073649
Cleanup WMA HWMODE and WMA HWMODE List
as the same functionality is already taken
care by policy manager
Change-Id: I5dc1342422e70737111f882013ed3a6351a85336
CRs-Fixed: 3064739
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
Define a new RTPM wake lock for NDP and create the functions
wma_ndp_prevent_runtime_pm()/wma_ndp_allow_runtime_pm() for it.
Change-Id: I6e70065b8c1ce3c91c411638957e13efff5a64ba
CRs-Fixed: 3050943
Fill the management frame data and enqueue the filled record to the logging
queue.
Frame sequence number, peer rssi, tx_status, authentiation algo,
authentication frame transaction sequence number will be filled to the
log record.
Change-Id: I069b7816fdc52eeed964d6586c52b58d1a5d5cd4
CRs-Fixed: 3030075
Currently host driver processes radio stats events with
scheduler thread without any lock and invokes hdd callback.
In hdd these stats gets handled in user space thread and after
processing stats, user space thread frees the memory allocated
in wma. Since one thread allocates the memory and other
thread frees the memory, this can lead to race conditions where
this memory might not get freed and mem leak can happen.
With this change add locking mechanism to allocate, use and to
free the memory.
Change-Id: I95906133bb2208a258c5cec16f4f01b1321ed0c2
CRs-Fixed: 3020218
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation
Change-Id: Ie04d4eb01f1a039f068b32b6c53aa3e65c919518
CRs-Fixed: 2987483
Currently, wmi_roam_blacklist_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I41d2ef6c228acd8f86f24107c02d11f1a8ac6dea
CRs-Fixed: 2990369
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
Use wlan_cm_is_vdev_roaming() API in wma, instead of
wma->interfaces[vdev_id].roaming_in_progress.
Change-Id: Icb88246b2c45c052a1d42dece4983b1e534fe608
CRs-Fixed: 2993180
As part of uplink delay report feature, send WMI cmd to
enable and disable target automatically sending TSF report
to HOST on a per vdev basis.
Change-Id: I79ef5bff5b91aca311ef16d7207e9dd2fb7ae0f2
CRs-Fixed: 2991975
Legacy mlme need notify assoc request frame to mlo mgr. It should
be sent to mlo mgr in qdf_nbuf_t.
Change-Id: I192503a00346498408971462d3b15cc98efa9919
CRs-Fixed: 2976150
Due to memory limitations, FW only allows SAP clients connected D3 wow
up to 8 clients. Hence, add a wakelock on host. Once the 9th client
joins, hold the wakelock. And release the wakelock when the 9th client
leaves.
Change-Id: I940ab50bfd216452248eed71c1fb02b625354f7b
CRs-Fixed: 2986286
Add DP reason code support for sending DELBA request,
so protocol layer can make decisions for special cases.
Change-Id: I4eeba3513820a98a15682190e40a06ce178d9441
CRs-Fixed: 2983544
The following vendor cmd can be used to set the
sw retry threshold per vdev for all AC:
Aggresive: QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY
Non-Aggresive: QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY
Change-Id: I49d88ae1f3f6142d8a420fd92f6f40bf3aad03e6
CRs-Fixed: 2945913
Set the newly added flag for wlan_cfg80211_crypto_add_key():
set to true if the request is from north bound, false otherwise.
Move processing of install key complete event into
crypto component.
Change-Id: I981e3722966c5b44255b3e29b7df3fbccfa087c8
CRs-Fixed: 2839454
Refactor csr_roam_pmkid_req_callback to use
mlme_cm_osif_pmksa_candidate_notify and move other
unused API under CM flag.
Change-Id: I835d54804f733eddff48de38e4c545a87f34bb30
CRs-Fixed: 2965602
wma_needShutdown related code is now obselete, during the cds_preenable
failure, this is obselete code is being invoked which is setting
wma->needShutdown. If the same is set the wma_close will not be
inokved resulting in the reference leak of of pdev object.
Remove obselete wma_needShutdown code.
Change-Id: Ia1463c9197593165eb5844e154f78fe3fe278fbd
CRs-Fixed: 2947133
As part of 320MHz bandwidth support for 11BE, add 320MHz bandwidth
in WMA layer, where in particular set bw_320 to 1 in wma_send_peer_assoc
and populate ch_width to 320MHz in wma_update_channel_list.
Change-Id: I61793add8d86b0557bd4eed78233860e6ade1c18
CRs-Fixed: 2935851
Update the wma structures with the eht capabilities received
from the firmware.
Change-Id: If571ab857e1f71b972655d9d48902b28e3974b1e
CRs-Fixed: 2911863
The delay before vdev stop is a global config,
no need to set for each interface separately.
Change-Id: I5760cf083a6749bb82cc88635a947f1d18308dfe
CRs-Fixed: 2904748
offload igmp feature to fw in case of suspended state
to avoid high power consumption.
Change-Id: I05fbf23dc2836f8f5dc6e2f45b35bf2d30c39790
CRs-Fixed: 2907644
Remove all of the conditional compilation for pmf since this
feature is mandatory for future scope from protocol point
of view.
Change-Id: Id3a2127e9ecb343ad2a0354dcbc331c22167d7fb
CRs-Fixed: 2852630
Currently peer create response support is added for connect path
but in LFR-2.0 case also peer create response received is
processed and lim_post_join_set_link_state_callback() is called
leading to sending vdev start again.
Call the API to fill peer create wma request only for initial
connection.
Change-Id: I24140efd5541f7ed4aa3cef9efebf5a729846902
CRs-Fixed: 2856636
Currently multiple ini is available for setting the broadcast
TWT requestor and responder configuration.
Deprecate "bcast_twt" legacy ini and also don't consider
legacy service capability WMI_SERVICE_BROADCAST_TWT.
So below is the service capability values combination
advertised by firmware:
new fw:
bcast_req bcast_resp legacy
0 0 0 -> disable bcast
0 1 0
1 0 0
1 1 1
old fw:
0 0 1 -> enable TWT
Also change the default value of "twt_bcast_req_resp_config" ini
to 1.
Change-Id: Ic9af296b0efffc8f76f647b5830183867e0adf57
CRs-Fixed: 2873360
Currently, WoW wakeup host event is handled in tasklet context and
it is taking more than 800ms to execute. This is due to excessive
logging to the console from the tasklet. As a result of this, IRQs
are getting blocked during this tasklet execution.
To avoid this, add a sysfs entry to enable/disable console logging
from host wakeup event based on requirement.
Change-Id: If91a8bd5f783f358dabf9dcf46bf4c50d05d7909
CRs-Fixed: 2881972
Currently driver fills unicast, multicast & auth mode values from
csr session which is not updated after roaming to AP with different
security profile. This causes incorrect values in AP profile command.
Send correct authmode/unicast and multicast ciphers in AP profile
command to firmware.
Also modify the below 2 ini default values as:
candidate_min_rssi_for_beacon_miss=-75
candidate_min_rssi_for_disconnect=-75
Change-Id: I33cc9f516447071e977768f01738eea7a2ecd99c
CRs-Fixed: 2879943
Add support to parse the BSS max idle period IE and configure
the idle period to FW if it is present in assoc response frame.
Change-Id: I144f2b1789775461a5df702dee72d0f73b9023cf
CRs-Fixed: 2788542
Add support to get the following TWT target capabilities
1) Nudge 2) all twt and 3) statistics
Change-Id: If74e99b0ff920481bcabb0300129b9067082d113
CRs-Fixed: 2854927
Initially, Host updates the AKM only after the EAPOL
handshake. Due to this, Enterprise auth is not detected
for initial connection.
So, add new API which gets the AKM from vdev and convert
it to WMI enum and send it in peer assoc command to firmware
during initial connection. In Firmware, this will help to
detect Enterprise auth as part of connection and prioritize
the WLAN connection over BT traffic accordingly.
Change-Id: I503601ca29f3aadd1ee359a535b4e60133f66476
CRs-Fixed: 2844318
