This reverts commit I293647175c151da0fd6628345f98ea65c83b1bb3.
New solution idle shutdown in suspend prepare is better.
Change-Id: I69a0e7401c811e4a9656fcc8e3dd069f4317cc35
CRs-Fixed: 3213236
This reverts commit I08818517d05e7866d50e3f92cfdc9fa1a4d0e63f.
New solution idle shutdown in suspend prepare is better.
Change-Id: I76b1ef8e6f945bbcba3955ff625484ebee727670
CRs-Fixed: 3213236
This reverts commit Ic701dce917288db09511f6ffc540cf8cf3eca5db.
New solution idle shutdown in suspend prepare is better.
Change-Id: I10aee75b2fee7026dfbb7173b66cddac24e313d7
CRs-Fixed: 3213236
The roam_ho_fail member in the hdd_adapter structure has
no references in the driver so remove this obsolete variable.
The code that previously used this variable was removed by Change-Id:
I2934e4a867458561c50170b0e786e63f20f1af4a
Change-Id: Iedd6359894433f216525a2e447f64fa665ed86e6
CRs-Fixed: 3213513
The offloads_configured member in the hdd_adapter structure
is currently only initialized but not referenced anywhere
in the driver so remove this obsolete variable.
The variable was introduced by Change-Id:
Icf598ca97da74f84bea607e4e902d1889806f507
Change-Id: I7af0679fe82e76f91f8c74aa674c72db17383e34
CRs-Fixed: 3213560
This enables configuration from user if and when the stale
packets from peer TID queues can be flushed.
Change-Id: Ic7427cdb8b70eeefea1b99d1f9be505a9cae76e6
CRs-Fixed: 3130419
Currently parser code doesn't have support for packing and
unpacking of optional fields in EHT operation IE which are
dependent on HT op, VHT op and HE op IE.
To achive this, add API to encode and decode EHT op IE and include
the generated EHT operation IE bytes in beacon and assoc response
frames.
Change-Id: Iab955903a3112cdbe4c9acb6e59eca4ea31bdabe
CRs-Fixed: 3197354
EHT capabilities and EHT operation IE definitions are updated as per
new draft version D1.5. Update corresponding IE handling as per new
definitions.
Change-Id: I16b8c578e28c8d9fd24383879291e6e976da2efa
CRs-Fixed: 3197353
Add EHT MCS to rate mapping for NSS 1 and NSS 2.
Update TX/RX bitrate for EHT connection depending on current MCS/NSS
configuration.
Change-Id: I0c55beab2c6b9a9609d5a2e454a0c0e8c1312d09
CRs-Fixed: 3181127
Add vdev lock to DP component to protect against
vdev parallel delete while accessing vdev from
DP interface, also introduce get and put APIs.
Change-Id: I4ee838e1dea0caf9936ced13d6ddce6646333f6b
CRs-Fixed: 3198876
The acs_pending_work member in the hdd_adapter structure has
no references in the driver so remove this obsolete variable.
The code that previously used this variable was removed by Change-Id:
I439398b406e9371a8e443f5409bd3f25b3062501
Change-Id: I64ed789ad0d0751cc683f48bd859b9d600c11f6e
CRs-Fixed: 3213562
Currently in MLO use case DP component interface is not
mapped to netdev registered to ip stack and also Rx packet
over nl interface is broken.
Fix these issues by attaching DP component interface
to netdevice which is registered to ip stack for TX/RX.
Fix Rx packet over nl interface by checking
corresponding ops properly.
Change-Id: Ibf9cb03565a9e2d5cd02091995259376e1069790
CRs-Fixed: 3200617
The tx_action_cnf_event member in the hdd_adapter structure has
no references in the driver so remove this obsolete variable.
The code that previously used this variable was removed by Change-Id:
Idaaacac4fdaf1b964432c33c10b1c86f8a591c2d
Change-Id: Idad017aa5568a3f2e49849522443dd2483562a66
CRs-Fixed: 3213565
The offchannel_tx_event member in the hdd_adapter structure has
no references in the driver so remove this obsolete variable.
The code that previously used this variable was removed by Change-Id:
Idaaacac4fdaf1b964432c33c10b1c86f8a591c2d
Change-Id: Icf51105e0c3e04ec2e1b26aa6c7a36a017b4c573
CRs-Fixed: 3213567
The Android Common Kernel (ACK) accepted change [1] to 5.10.20 which
enables support for nested composite objects in the Kbuild
system. This was introduced to fix the "Argument list too long" error
that can occur when there are too many filenames passed by the build
system to the "ar" command.
The expectation at that time was that this patch would be maintained
for all future ACK kernels. However the ACK maintenance team has
decided not to maintain this patch beyond the 5.10 kernel, so update
the logic that determines if an ACK kernel has support for the
feature.
Subsequent changes will need to be made to address the "Argument list
too long" error when using an ACK that does not have this support.
[1] 21c713f8e8
Change-Id: Ief9a74a24d58796a90e19bd86fa269e64bcf4c73
CRs-Fixed: 3139401
(1) is_critical pointer flag in hdd_wmm_classify_pkt is not referred
properly which then hdd_wmm_get_user_priority_from_ip_tos() is skipped.
(2) CONFIG_WLAN_CUSTOM_DSCP_UP_MAP is only configured when
CONFIG_REMOVE_PKT_LOG is 'n', so if CONFIG_REMOVE_PKT_LOG is set to 'y',
CONFIG_WLAN_CUSTOM_DSCP_UP_MAP will no chance to be enabled,
then hdd_custom_dscp_up_map() dummy function is invoked always.
CONFIG_WLAN_CUSTOM_DSCP_UP_MAP should not be tied with
CONFIG_REMOVE_PKT_LOG, move it out of CONFIG_REMOVE_PKT_LOG,
also fix is_critical flag referring issue.
Change-Id: Iac6e7ccb41270677298d152498ad7a9c0c66ff14
CRs-Fixed: 3205745
Currently when sar safety unsolited timer expires, driver schedules
a work to send sar safety unsolited events to user space. When driver
receives sar set command from user space it tries to stop this work
with delayed work stop sync. This delayed work stop sync API waits for
work to get complete and then it stops the work, because of this,
work runs the complete for loop and sends extra sar safety unsolicited
events even after receiving sar set command.
To addrerss above issue, set the sar safety request response event
before delayed work stop sync to complete the work.
Change-Id: I3485e4b1ea600393ff2d9512a055de92d0a3d612
CRs-Fixed: 3213334
As part of protected dynamic interface control feature,
if the user space disables WiFi, then the platform driver
disables the WLAN HW as well. Until the user enables WiFi,
the WLAN HW stays disabled.
So, add support to enable the WLAN HW, when the WiFi is
enabled by user space.
Change-Id: If6b90ae57c4471f4c613ead8310fd0a7ada818f3
CRs-Fixed: 3215335
Limit mlo link num and band by psoc sta cfg mlo_support_link_num and
mlo_support_link_band.
If mlo_support_link_num is 1, only permit 1 mlo link, don't permit
partner link.
Disable both assoc link and partner link on disallowed band too.
Change-Id: I04f0725ceb0fb4e0bd14ca44ff1a870702b62285
CRs-Fixed: 3211973
Add cfg to configure the max number of links supported for mlo sta
connection.
Add cfg to configure the band bitmap that mlo sta connection supports.
Change-Id: I6b27a7eb13eff026c5123e4bd24ba2424dba781d
CRs-Fixed: 3202029
Currently target_if_cp_stats_extract_vdev_summary_stats
function prints bcn SNR which can be RSSI as well based on
whether firmware supports reporting rssi or not.
Add check for firware support to print RSSI/SNR
Change-Id: Ifef7bfad7d79c1a1bb84641bc1d3632f6d683252
CRs-Fixed: 3209907
In api wlan_cm_is_roam_sync_in_progress(), the roam_sync
status is checked for every instance of
wlan_cm_is_roam_sync_in_progress resulting in excessive
printing of cm_is_vdev_roam_sync_inprogress logs
Add check to verify roam_sync status for STA mode which
results in trimming of cm_is_vdev_roam_sync_inprogress()
logs.
Change-Id: If0228edb90d718c7fde2b8f34e0003256cfd139b
CRs-Fixed: 3211915
This is about SAP+SAP+STA case. Restart third SAP failed after start
up and then 5/6 GHz disabled. This change allows SAP+SAP+STA SCC on
same mac and avoid third SAP restart fail.
Change-Id: I691b2e03132acfb8f724fc2f75b3816d17eb4d17
CRs-Fixed: 3198977
In hw mode change offload case, update the mac id and
frequency range in hw mode transition event handler
instead of post msg to lim and sme to avoid the
information updating delay.
Change-Id: I3dc1d37880691148c4cffd8e1f5d46172f03cb0d
CRs-Fixed: 3211683
For targets not supporting shadow config v3, the compilation
may fail since the definition for shadow config v3 will not
be available.
Featurize the shadow config v3 properly to avoid any
compilation errors for targets not supporting this feature.
Change-Id: I6d968ff98776159319ec5edad1ada1b6d888f87e
CRs-Fixed: 3214412
Start one SAP on 5 GHz and one SAP on 2 GHz, and start third SAP with ACS
on 2 GHz band. Then, 3 SAP have different freq_seg0 after disable 5 GHz and
6 GHz band. Raise this change to check AP_AP SCC override with freq_seg0
and freq_seg1.
Change-Id: I720aff19a20e3d5ab9a2a31246e47308f7d09d0e
CRs-Fixed: 3165082
Currently EHT IE is sent with contents 0, fix is
to send read EHT IE info from mlme config if session
is NULL.
Change-Id: I7da0d98c2ef7b34ee50d306a95fa7c80e9a5739a
CRs-Fixed: 3207350
Vendor commands of wiphy aren't initialized when driver load as FTM mode,
if changed to mission mode later with following cli:
echo 0 > /sys/module/wlan/parameters/con_mode,
vendor commands of wiphy keep uninitialized, wpa supplicant can't get
roam offload status by QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES,
so PMK isn't sent to driver/firmware, roam offload failed.
To fix it, remove QDF_GLOBAL_FTM_MODE check in wlan_hdd_cfg80211_init, let
vendor commands of wiphy initialized in FTM mode too when driver load.
But in each vendor cmd, check FTM mode when called, if FTM mode, return
-EPERM.
When driver is changed to mission mode, all interfaces are deleted and
re-added by driver, when interface added event is received by
wpa supplicant, QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES is
called again to get roam offload enabled status, PMK will be sent to
driver and firmware when RSO start, roam offload will work.
Change-Id: Ie0c868ebd4b7e356d72a154206b13df94f378188
CRs-Fixed: 3213221
Add config file for Mango WLAN device and enable emulation flag for
Mango WLAN device.
In addition, use static symbolic link '.mango -> .' for multi-ko support.
Change-Id: I0cebf11407e5625fd6475723496b9cda72cf5165
CRs-Fixed: 3210120
When sending Association request frame, include
MLD capabilities in basic variant multi link ie.
Change-Id: I07b9214a450e8f9cbfc7b0720cd4aab36498bc6c
CRs-Fixed: 3212101
