Currently peer is not removed if add bss fails. This can cause
assert in firmware as driver sends VDEV DELETE without peer delete.
Add changes to remove peer if add bss fails.
Change-Id: I7591af55f24919af9cf2d1f288a5bd9ff706adda
CRs-Fixed: 2029804
Return value of __netif_tx_trylock should be checked immediately
after being invoked, any subsequenct actions designated to the
atomic context should be abandoned if trial acquiring of the
spin lock fails
Change-Id: I95504eed14c3e30d014aa1ccc23356a7df02fb00
CRs-Fixed: 2047246
qcacld-2.0 to qcacld-3.0 propagation
Add support for configure host init SAP HT rate
upper bound.
Change-Id: If749f8a036d98d9070cb05170fa1e612fcb30e8a
CRs-Fixed: 1091897
qcacld-2.0 to qcacld-3.0 propagation
Add support for host enable/disable rts sifs bursting, and set
default tx mpdu aggregation count.
CRs-Fixed: 1089478
Change-Id: Ieb63621f217ccd1a50b925ea4dda05fecad01387
Currently, if supplicant disabled roaming, driver doesnot send RSO
cmd to fw. This causes roam invoke to fail in FW since RSO start
never happened at least once to configure roaming engine in FW.
After connection, Send RSO start followed by RSO Stop if supplicant
disabled roaming to make sure roaming engine in FW is configured
properly with required parameters at least once.
Change-Id: I72b73554b03ea3f0fa04d0da2a2db96c0ed8b1c8
CRs-Fixed: 2042629
Currently, host driver sets FILS capability enable if broadcast
probe response support is enabled(i.e. g_enable_bcast_probe_rsp).
since this support adds FILS request params IE(which has the max
channel time STA would wait for AP to respond with broadcast probe
response) in probe request, FILS capability is set in ext cap.
However, it is also set in SAP role which leads to scan issues with
some client stations.
Restrict FILS caps in ext cap to STA role only if
g_enable_bcast_probe_rsp INI is set.
Change-Id: Ia5fc0cbf36a4a6df3eb21015ef0508f6daa7b21d
CRs-Fixed: 2048318
Avoid frequency list can be generated due to LTE Coex and
Do_Not_Break_Stream.
Combine LTE Coex & DNBS avoid frequencies before sending the list to
application.
Change-Id: Ibafac2fcc160d029fc5643847a5647edf10db29d
CRs-Fixed: 2045120
Adds API to send "list of frequencies to be avoided"
to the application, when Do_Not_Break_Stream is active.
When DNBS is active, all frequencies other than the
AP/P2P-GO operating frequency, in the current band are to be avoided.
Change-Id: Ia27b5911715a216f0ab49aa0d984243e9ea49b64
CRs-Fixed: 2045120
presently timer value is 250sec for wlan interface up from the upper layer,
which is too high.hence moving to 5sec.
Change-Id: Ia955bd12ab37f33c312c728d55c0019317a20acc
CRs-Fixed: 1104031
If firmware supports CSN[Compressed Steering Number of Beamformer Antennas
] 8x8 and if the concerned INI(i.e. gTxBFCsnValue) is set above 3 which is
default fw support currently, send Probe/Assoc Request with CSN in VHT caps
as set in INI. Else set CSN to 3.
CSN of Beamformer Antenna in VHT caps is one less than the max number of
space time streams that the STA can receive in VHT NDP(i.e. CSN in VHT caps
= max space time streams STA can receive - 1)
Change-Id: I6c77f7513ee090beba8849b27c90ac0346e1ac58
CRs-Fixed: 2052348
Parse Service Ready Extension event to get requested DMA ring capability
and initialize DMA rings.
Change-Id: I491e61a2ebbab549c31635ea74dcb89e20be3f97
CRs-Fixed: 2055839
1. Add an extra parameter pdev id to
qdf_trace signatures to avoid compilation break.
2. This variable allows to collect records per pdev
for Lithium based chipsets.
3. Set this variable to a default value QDF_TRACE_DEFAULT_PDEV_ID
for older chipsets.
Change-Id: I2f4c2e3525ac0d1d53f1af3db7e43acadf6ab835
CRs-Fixed: 2049412
If the peer's MAC is same as the peer present on any other vdev,
and if this peer is added to firmware, firmware will crash.
To fix this do not add peer, if peer with same MAC exist on any
other vdev.
Change-Id: I5565f4b18ab68cff6b63ba99f307f16654e50246
CRs-Fixed: 2053392
Initialize add_ie to false to avoid the possibility of
using add_ie with random value.
Change-Id: Ic2a4dfee2961220f853e674c3dfe90707377bf24
CRs-Fixed: 2042711
On wifi config set of default scan ies from supplicant, default_scan_ies_len
is not properly initialized and reset leading to memory overwrite.
Properly initialize the default_scan_ies_len on every wifi config set
of default scan ies from supplicant.
Change-Id: Ib26820e30019a30a7d6369d382d51b648b6b0d43
CRs-Fixed: 2036132
1) If g_qcn_ie_support is enabled, Save QCN IE along with default scan
IE's received from Supplicant at init time.
2) Compare and update scan IE's with saved default scan IE's for each
scan offload request to FW.
Change-Id: I902ab753db3bc3d5b4de400f550bf4ba3ceb424b
CRs-Fixed: 2033203
Currently, PCL may not have the weights for the channels
from the selected band.
Keep only the channels of the selected band and remove
the channels of other band from ACS channel list
and PCL.
CRs-Fixed: 2053468
Change-Id: Ie71febe9068493e2c356f0590a86e3c15494b2e1
Currently, in beacon IE parsing of roam synch indication, fixed fields
[beacon interval, timestamp, capabilities] are not parsed resulting
in these fields being reported as zeros to supplicant.
Parse beacon IE's to extract fixed fields from beacon IE's.
Change-Id: I3ba2b8037de99a49b42eeecc7670bdb23c118f9d
CRs-Fixed: 2053019
Defer the disconnect that is issued because of driver unload
and handle it immediately after the roaming is complete.
Change-Id: I9200d0f218560f2a990f491a27563bbbf594ae24
CRs-Fixed: 2025273
Currently, the CONFIG_WLAN_POWER_DEBUGFS and CONFIG_WLAN_DEBUGFS
are not enabled for statically loaded driver.
This results in missing subsystem power stats.
The reason for that is the enabling of this macro is conditionally
done under KERNEL_BUILD=0.
This commit enables the macro to be also
conditionally done under all values of KERNEL_BUILD
Change-Id: I2824fdbb438b37ee58a95a6ea889be5e7691bef5
CRs-Fixed: 2033114
The firmware version sub id is not included in the current Bugreport.
Including subid and HW version.
Change-Id: Idc96c15d377935e0ff7291b5542ef34627613136
CRs-Fixed: 2034277
Move a few logs to appropriate levels so that they are
not unnecessarily spamming the dmesg
Change-Id: I0ae839ef1420f3a540cfccee3867261ddf5a5870
CRs-Fixed: 2043741
When data traffic is running on HL card, it will hit watchdog
bark issue. It's caused by wrong pointer usage in ol_tx_queue.c.
Add fix to sync with qcacld-2.0.
Change-Id: I7869ef86839e69e515ccd70795b3909abc09d46c
CRs-Fixed: 2053632
Currently, Host allows to set packet filter in disconnect
state which is leading assert in firmware.
As a part of this fix, skip packet filter configuration
in disconnect state.
Change-Id: Ibc02105fe4d2455dfb0e527d7fcb240fc1b39330
CRs-Fixed: 2041846
Currently ext_cap structure is not reset to zero in
lim_send_probe_rsp_mgmt_frame. This can cause
dot11f_unpack_ie_ext_cap to return status other than
DOT11F_PARSE_SUCCESS and result in unnecessary error messages in
lim_update_extcap_struct.
Reset ext_cap structure in lim_send_probe_rsp_mgmt_frame to fix this.
Change-Id: I874d4d150a405d32737912f0b40661bafa5df268
CRs-Fixed: 2035704
Add eSAP_DFS_CAC_INTERRUPTED, eSAP_ECSA_CHANGE_CHAN_IND and
to sap_hdd_event_to_string(). Currently these events are
printed as eSAP_HDD_EVENT_UNKNOWN.
Change-Id: Ic59b4dfcfdd09aa808398d9dcd0b935cedfa7de3
CRs-Fixed: 2053387
Currently in hdd_extscan_start_fill_bucket_channel_spec() the
QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC attribute is parsed without
specifying a policy. This means that no policy is enforced.
Subsequently the values of the nested attributes are retrieved, but
again without any length limits enforced. This could result in a
buffer overread.
To prevent this issue:
* Parse using the existing policy wlan_hdd_extscan_config_policy
* Update the policy to add missing attributes
Change-Id: I3b20cb28d1beccd2e804b022b531413ad1edb533
CRs-Fixed: 2054958
Host is always updating channel width as 20MHz while updating the
rx nss value in Operating Mode IE.
Channel width should be updated from session entry.
CRs-Fixed: 2048435
Change-Id: Ib78f52d3ad1be875450a76c20a9332933f50277f
Driver is accepting get tx power request from the application in
disconnected state and requesting FW for class A stats.
Since it is in disconnected state driver fails to parse the peer
stats.
CRs-Fixed: 2052864
Change-Id: Ie49528f0822b45bb103bc578f35b992797ebb1c5
WMA is ignoring stats request if there is already pending stats request
for the same sta id. When WMA ignores stats requests it should send a
response back to HDD so that it doesn't timeout waiting for response.
CRs-Fixed: 2052962
Change-Id: I781816c42fac12a0ace4e64558fc09418f32ddd7
Host is not stopping the TDLS timers when PDR is triggered.
These timers are expiring during wlan shut down and leading to
crash.
Fix is to stop TDLS timers while resetting adapters.
CRs-Fixed: 2050795
Change-Id: I944081342ff2de2548ff839a7b852d64282c0323
FW indicates the bt coex events using event
'WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION' and with reason as
'WMI_TDLS_ENTER_BT_BUSY_MODE' and 'WMI_TDLS_EXIT_BT_BUSY_MODE'.
WMA is handling this event and sending it to PE, But PE is not
handling it.
This change is to handle WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION
in PE.
CRs-Fixed: 2051707
Change-Id: I844d1883bcb769799170fd7cf7114940d1bb8cd4
