Rather than extracting msdu end pkt tlv information per field basis
during fast data path, extract msdu end pkt tlv information at once
and store in local structure.
Change-Id: I0877ba4f824d480cc0851c72090f010852d0d203
Drop the packet if msdu_done bit is not set while processing
rxdma err frames. This is not expected while reaping WBM RX
release ring.
Change-Id: I8776d15ea88319d7d955fdae90958648484dbda0
CRs-Fixed: 2603791
This change introduces the vendor event
QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT.
Host drivers can request user space application to set SAR
power limits with this interface.
Change-ID: I15cf651c722bf828ba9012d81d99922c39a9e1fc
CRs-Fixed: 2615364
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
Export __qdf_nbuf_data_is_icmp_pkt to outside QDF. This is needed for
implementing the per-peer protocol counters
Change-Id: I40db2b95347e95f2a5a7dbf6650fa873f564f1c3
CRs-Fixed: 2604877
In many functions, in the regulatory component
(e.g reg_modify_chan_list_for_freq_range), the channel enum iterations
assumes the channel enums and channel maps have the same order so that
there is a one-to-one mapping.
The change I5fe2c7a5db44f1cf8d6cb6317396c4527482137c removed
(compile-conditionally) a few channels. The removal violated the one-to-one
mapping principle. This led to 2Ghz channels being added to 5Ghz only
radio, which in turn caused many auto-channel selection issues and test
failures.
Instead of removing the channels, add (compile-conditionally) invalid
channels to maintain the one-to-one mapping.
Change-Id: I023de9732e02d52e544199b77680e9f7706d5210
CRs-Fixed: 2612990
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
pdev_id and mac_id were incorrectly passed
as arguments to dp_get_lmac_id_for_pdev_id
Fix passing the arguments in right order to
the API to access appropriate lmac_id
Change-Id: I42773a6ccae2f87f128d3c462e6a332fe658f45e
CRs-Fixed: 2611926
QDF_TRACE_LEVEL_NONE(= 0) is a valid value for qdf_dbg_mask,
which is currently being treated as error. Correct the
condition with this change
Change-Id: Id8ddebc4774ccf721ce7ff14b035f287b3a4b5ee
CRs-Fixed: 2587010
Add a function to encapsulate Spectral time stamp WAR logic which corrects
the Spectral time stamp reported by target.
Change-Id: I490c9f2109f36831cd8de47b8165749e93d9b5cb
CRs-Fixed: 2600170
1) Enable DDMA support, FFT bin length adjustment SWARs
2) Skip 16 bytes of padding added after Spectral summary report.
3) FFT report header length is 24 instead of 16 in Pine.
4) Max FFT size is changed to 10.
CRs-Fixed: 2608215
Change-Id: If32a8995f814140f5b61041031fb842d01d24c94
Beacon-interval is sent as part of vdev
start_params. Hence, the same need not be
sent as part of vdev up.
Change-Id: Ia1816a32d23c4925c0572c6c76996a36415fa275
CRs-Fixed: 2597539
Firmware advertises service capability bit
WMI_SERVICE_PEER_DELETE_NO_PEER_FLUSH_TIDS_CMD
when peer delete command takes care of flush
all tids functionality.
If this service bit is set advertised by FW
then host does not need to send the flush tid
command before sending the peer delete command.
Change-Id: Ic6632772eeebc7f1494f1dd5e9d533b2bc22e533
CRs-Fixed: 2609962
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
to implement thermal mitigation. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL.
Userspace requests the driver to enable/disable thermal mitigation
based on the thermal state of the device and wlan host performs the
required appropriate action. wlan host driver maps the thermal level
provided from userspace via vendor command to corresponding duty
cycle off percent value and duty cycle value,send
WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: Idc9c87dcb4275122980713471544baa23e705a53
CRs-Fixed: 2610403
In the change I0165f3bd4638280b45ad54391319806fba62e2fe, driver tries to
fetch the PDEV in init_deinit_handler before it is created in MCC. This
can cause driver init to fail.
Move the fetching of the PDEV to after the PDEV is created.
Change-Id: I028ac14da333084ce68f03f3d3771cdb6298933b
CRs-Fixed: 2611379
Replace QCA_WIFI_QCA8074_VP with CONFIG_WIFI_EMULATION_WIFI_3_0
since VP platform is not being used anymore.
Most of the parameters present inside QCA_WIFI_QCA8074_VP are related
to emulation timeouts. Hence replacing it with a more meaningful flag.
Change-Id: I22a0e5803e765333947f1613b376dcc6bd25b5af
Update value of new ini for separate iface support for NAN
"nan_separate_iface_support" to fw through a command
WMI_INIT_CMDID.
Change-Id: I55830e0d16d86ee5a0bfa7d3e44c6309c0d3d54b
CRs-Fixed: 2612010
Currently, the driver rejects the roam stats event if any of the
roam trigger or roam scan or roam results tlv is not present.
Now the firmware will send neighbor report immediately after the
neighbor report response is received from AP instead of buffering
it as done before.
So do not parse the roam trigger, roam scan, roam result tlv if
the tlv is not present. Add new flag in the tlv parsing structure
if the TLV is not present.
Change-Id: I366d8853f7f45dcdac6d4aa5c3a8a12a8b602a4f
CRs-Fixed: 2610377
Some areas in other components are directly calling the kernel api
functions to perform runtime PM no idle operations. Create a new HIF
function to handle runtime PM no idle operations.
Change-Id: I8328bc74ccc8e8acd35d7d73ec4cc21094b8f5b2
CRs-Fixed: 2607721
In the function that processes rxdma err frames add null check
before calling vdev callback function. If its valid then deliver
the skb to stack or free the skb.
Change-Id: I7c481eb8f702d9109c4a9f79db7e050ece6c3689
CRs-Fixed: 2607658
During scan request from framework wlan_cfg80211_scan gets
invoked. If the cfg80211_scan_request parameter has number
of ssids set to zero then driver will set the scan mode to
passive mode. This will result in fw doing passive scan
instead of active scan. Probe request will not be sent to
discover the peer. This will sometimes result in failure
to discover P2P GO peer.
Set the scan mode to active mode in scan request message to FW.
Change-Id: Ic28757cb69ec62e554ac8baccce17cac504a0bef
CRs-Fixed: 2606614
As part of new requirement WLAN subsystem needs to perform thermal
mitigation action as per the thermal state of the device. The
wifi hal sends vendor command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
with the thermal level parameter and wlan host performs the required
appropriate action. wlan host driver maps the thermal level to
corresponding duty cycle off percent value and duty cycle value,
send WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: I5b455ae6483f3d5bf2fe708f40c32a55eb8b9bdb
CRs-Fixed: 2610404
AST entry delete logic has some conditional checks making code with respect
to HTT V1 and V2 messages making it tough to follow.
Change-Id: I229324446134b32021a956fb689e4726256fcc28
