Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Add change for disconnected peer stats ,
will remove from bss_peer
and will store in vdev, bss peer will have only multicast
stats for connected and disconnected peer.
Change-Id: Id294d1f3218dbfabcc252bac04f1a3e5f543a247
CRs-Fixed: 2290723
Currently aggregate vdev/pdev is missing nawds mcast drop
counter, add nawds mcast drop counter from peer
Change-Id: If1e2296c30cfcb5689449c8e23317282e5dce1c6
Clean up WMI component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: Ie375e6fda2943f5f2b7287da4374ef9d7470d593
CRs-Fixed: 2243843
Clean up hif and htc component prints by correcting trace levels
for regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: I45b1bbe7b16ab7fb8e229b59a094c7382561d658
CRs-Fixed: 2243843
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
Clean up spectral, tif and umac component prints by correcting trace
levels for regularly occurring prints and removing newlines from
converged print APIs since qdf_trace_msg appends them by default.
Change-Id: Ib10f1b1c54ecbcb9f4076be7c2c4708359d488e0
CRs-Fixed: 2243843
Move all qdf_print from printk to qdf_trace_msg so that trace level
management can be carried out at runtime
In addition to the above, change contains removal of newline
escape characters from the format string of the converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: I18cd06400bb9747761bbd86bfb38fe6d06106729
CRs-Fixed: 2243843
Add new target type for qca8074v2 and extend target
type checks of QCA8074 for QCA8074V2.
Change-Id: Ib3ff4505e2057fc843b492b9720004dcac042a65
CRs-Fixed: 2292271
TWT requester/responder capability is reported by FW in service bitmap.
Based on this support set soc's extcap feature bit. This is used while
adding extended capabilities IE to set TWT REQ/RSP bits in IE.
Change-Id: I304e9fa4dc32bd3c2f47901bc34438cb188d138a
CRs-Fixed: 2290026
WMI_PEER_TWT_REQ and WMI_PEER_TWT_RESP flags are introduced in peer
flags sent to FW in PEER_ASSOC_CMD. Add corresponding flags in host
structure to indicate peer's support for TWT requester and TWT
responder.
Change-Id: Ic5edb594a95b255fe8ce1091d96c4d886b4d6170
CRs-Fixed: 2290026
Duplicate stats buffer in the callback so that all
allocations get freed by its owner, this will avoid
memory leak issue because of race condition between
umac and upper layer.
Change-Id: Id18d75eb9adc46a6147634eb5b1e0babe32c7c37
CRs-Fixed: 2289355
Add WMI support for new 1x1 connect with 1 Tx/Rx Chain action OUI to be
parsed and sent to the FW.
Change-Id: I077eccb6fab0684d1bc0ec63745de728bfd1a868
CRs-Fixed: 2264328
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
Alter the wbuf length based on the scan_offset_time set in
the host to FW. This will avoid sending incorrect payload
to the FW.
Change-Id: I0033dcab7e38fe7f107180294cb3cbaaf0c9d45e
CRs-Fixed: 2134748
When STA role is coexisting with other sessions(P2P, SAP or IBSS),
WAPI encryption mode is not allowed.
Add a new API to check if the connection/start request should
be rejected when:
1) A STA with WAPI encryption is to be connected while there
is at least one concurrent session already running.
2) A new session is to be started while there is already a STA
connection with WAPI encryption enabled.
Change-Id: Idf0d346138eeda339254535f1f7131fda4a5086a
CRs-Fixed: 2290549
When the variable 'false_radar_found' is 1 a set of dfs variables are
supposed to be reset. The reset of the variables are done from within
dfs_radarfound_action_fcc() and dfs_radarfound_action_generic().
However, neither the function dfs_radarfound_action_fcc() nor the
function dfs_radarfound_action_generic() is called when
'false_radar_found' is 1. Therefore, remove resetting of the dfs
variables from the two functions and perform resetting of the
dfs independent of the radar found action.
Change-Id: I120dd8dc7abe13aa9dcaa7a29c10deea06cb8043
CRs-Fixed: 2289775
QDF_DEBUG_PANIC_FL is currently not defined when PANIC_ON_BUG is not
enabled. Add a stub for this case to prevent compilation failures on
non-debug builds.
Change-Id: Id78ac189ad3e3ab096d2e44db5ce01afe599c3bb
CRs-Fixed: 2293402
Currently if ini config dfsPhyerrFilterOffload is set zero on Rome
attached Platform, wlan interface will fail when do interface up.
This makes no sense, since ini configure can be set to zero, also
in this case host can handle the phyerr event instead.
Remove this check in target_if_reg_phyerr_events_dfs2.
Change-Id: Ie33072c8d40925eb550bd820462fc9ab93f0e0c0
CRs-Fixed: 2286382
TWT delete, pause and resume command is upadted by FW to include peer
mac address. Update host implementation to include peer mac in these
commands. Also, resume command is updated to include next_twt_size.
Update resume command for the same.
Change-Id: Iec184d0449b06aaeb9bac558e8cb5322f867e12f
CRs-Fixed: 2279309
1. Allocate and Initialize host and target copy engine configuration
for QCA6390 based products.
2. Setup Copy engine service map for QCA6390.
3. Add conditional compilation flag QCA_WIFI_QCA6390 to support
QCA6390 based products.
Change-Id: Ia4dd4d436b8ecae0e9f91faa0c1fe7dbd14f001f
CRs-Fixed: 2259312
All the dfs timers that are initialized with qdf_timer_init()
must be freed with qdf_timer_free() to avoid the timer leaks.
Change-Id: I5425f0a84d0e252e3a1dc9b835f1b655fe79a691
CRs-Fixed: 2262081
Spectral allocates its nbuf using qdf_nbuf_alloc() and calls
Netlink functions to send the SKB to the application layer.
After sending SKB, the Netlink send functions free the SKB using
dev_kfree_skb(). As a result, QDF nbuf tracker treats this
an SKB leak and panics the system.
To avoid this leak, remove the SKB entry from QDF nbuf debug hash table
by calling qdf_net_buf_debug_release_skb() before handling
the SKB to Netlink send functions.
Change-Id: I62c7046d1481c2a38ef5321410ebca9f5f5f34ed
CRs-Fixed: 2285654
Move rate table API changes from umac to common
data path in order to make the APIs available
throughout the driver.
Change-Id: I1a8aeb3b73ca9df3ab7535c23c8b7e02e6af13de
CRs-Fixed: 2286841
Add NULL check before dereferencing pointer in TKIP demic function
in RX defrag path.
Change-Id: Id13f91409c2891ae833e58e4c9d9d09231682f8a
CRs-Fixed: 2287517
Add support to parse Multiple BSSID element
from Beacon and Probe Response frames and to
update the scan database.
Change-Id: If2c58529c4dca3d3866bd7f905d4a1b6983f468a
CRs-Fixed: 2274579
The driver currently changes the hw_mode based upon
the first candidate found in the scan list, and tries
to connect to it. It may happen that the connection
fails, and the STA then tries to connect to the AP
on same channel as the concurrent adapter.
It would result in hw_mode = DBS, as it is not
updated after connection success/failure.
Also if the first AP channel is in same band as that
of concurrent adapter, and the connection fails,
and the STA tries to connect to an AP in a different
band, this too is not allowed as hw_mode is not DBS
Fix is to change the hw_mode based upon the scan list.
If the driver finds any scan result which may lead to
DBS connection, the hw_mode should be set to DBS.
Once the connection is done or failed, the driver
can check and update the hw_mode again.
Change-Id: I3c186f47dd5528f0af2598bb02c1b7e297d01548
CRs-Fixed: 2290760
We are taking spinlock irqsave before requesting group irqs. But some
times interrupt is coming immediately for the iqr we reuested even before
releasing spinlock irqlock. Since We are trying to take same spin lock
again for disabling interruts in irq handler dead lock is happening.
Fixing the issue by not handling irqs coming during request irq time.
Change-Id: I31484ab64942cc9e318139c522aac3d7cef9b109
CRs-Fixed: 2286715
It doesn't update TDLS feature flag when handling FW ready event, and
cause feature mismatch between FW and host. So update TDLS feature
feature flag when updating tdls configures.
Change-Id: Ib5978063581cac0f4c0ebc90f8981a5b68aed1da
CRs-Fixed: 2291311
When new napi is added unique napi_id is assigned and an entry
is allocated in kernel napi hash table of size 256, vice versa
napi del will remove the entry from hash table. Currently during
driver unload dummy rx napi's(added for GRO case) are not deleted
which causes resource leakage in kernel napi hash table.
While adding new napi if napi_id exceeds hash table size,
then entry from zero index is accessed to find unclaimed
hash entry which trigger invalid entry access since previous
driver unload did not delete napis properly.
In use case where multiple wlan driver instances are used this issue
can be quickly reproducible since it triggers napi_id to exceed
hash table size within less number of driver load/unload.
Fix is to delete rx dummy napi's during driver unload
Change-Id: Idfb24c5c09ebc131c2b19d894d08a8ea34675ed6
CRs-Fixed: 2288118
ba_window_size_valid and ba_window size support is missing
while sending wmi_peer_reorder_queue_setup. This is needed
for handing 256 BA which is not FW default.
Change-Id: I3218921c48c0f82225b7992076e73ac0acf7bd11
CRs-fixed: 2285423
Add ENABLE_DBS_CXN_AND_DISABLE_SIMULTANEOUS_SCAN option for the ini
gDualMacFeatureDisable. This is to enable DBS support for the
connection and disable simultaneous scan from upper layer. But DBS
scan remains enabled in FW.
Change-Id: Ic280de2cc63a3775c0d9dd61985ff89df58a4a89
CRs-Fixed: 2291935
If user tries to enable pktlog multiple times, pktlog enable
fails as the pktlog is already enabled.
while returning failure, current pktlog state is not updated
to PKTLOG_OPR_NOT_IN_PROGRESS in pktlog_enable api.
Now if user tries to get pktlog using cat command driver
returns resource busy from pktlog_enable as the current
pktlog state is not set to PKTLOG_OPR_NOT_IN_PROGRESS.
To address this issue, set the current pktlog state to
PKTLOG_OPR_NOT_IN_PROGRESS in case of failure.
Change-Id: I08e67c13e7a781340a97ad4c37308f3e61972c99
CRs-Fixed: 2278363
The current diagnostic message that gets printed in the event some
memory is freed in a different memory domain than it was allocated from
is confusing. Rather than using "found" and "expected," use "allocated"
and "current" to differentiate the different memory domains.
Change-Id: I45efeb892d2c75a3f0b13d41e43b421a2b1a139e
CRs-Fixed: 2290148
Populate the RSSI value for the non associated clients
added in pdev->neighbour_peers_list from monitor status
ring
Change-Id: I509d06bec6eafe8377681c8a3da9a64f301c3c73
CRs-fixed: 2286571
Add new ast_get_type API for DBDC repeater feature.
Add other changes required in WDS and MEC handling
required for DBDC repeater feature to function properly.
Apply sta kickout logic to handle roaming cases
only within same radio. For roaming across radios, DP should
rely on control path.
Change-Id: If9b35720082dd87de40827843a14238e818bc454
There is an existing WMI command which is used to start the extscan
hotlist monitor, wmi_unified_get_buf_extscan_hotlist_cmd(), but this
API has multiple issues:
1) The "get_buf" in the name implies it retrieves something, but it
doesn't.
2) The full name is not a "mirror" of the companion function that
stops the monitor, wmi_unified_extscan_stop_hotlist_monitor_cmd().
3) The current function has an "int *buf_len" parameter that is unused.
To address these issue introduce a new function with "mirror" naming,
wmi_unified_extscan_start_hotlist_monitor_cmd(), which has an
appropriate parameter list.
It is expected that all clients of the existing API will be moved to
the new API, at which point the existing API can be removed.
Change-Id: Ie705f2462c7d5befa691f1ab57293e55ab68e3e2
CRs-Fixed: 2289368
qdf_nbuf_free_debug() does a hashtable lookup for nbuf metadata without
grabbing the appropriate spinlock. This naturally leads to a variety of
issues. Acquire the nbuf metadata lock while accessing the metadata
hashtable in qdf_nbuf_free_debug().
Change-Id: I058b00abcf0162c764fc9ad5011be341a07f2b9d
CRs-Fixed: 2288522
Add necessary wrapper functions so that other components/umac
can check if a HT20 channel is in NOL.
Change-Id: Ie2cda1fe8f71d829e261ebdcf4563a4c2ff352ae
CRs-Fixed: 2180879
Added extra check to prevent buffer overflow pointed out
by static code analyzer tool.
Change-Id: Ieeb3e89089b63eac3dc210447d7ec8e964cd52c9
CRs-Fixed: 2285486
Move the state to in_progress when we process addba
request and upon tx comletion of addba response, move
the state to active. Any addba request received during
in_progress is ignored and reo queue is updated with
window size 1 and set to inactive.
Change-Id: I69cfbc162d873f9e6842ca3e7971146dafba2695
Crs-fixed: 2188927
