According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_DO_ACS
QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES
Change-Id: I56d685cf3d7bab8f758d52b2e5d3c0a735accb26
CRs-Fixed: 2635226
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_ROAMING
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY
QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY
QCA_NL80211_VENDOR_SUBCMD_NAN
QCA_NL80211_VENDOR_SUBCMD_STATS_EXT
Change-Id: Ie2fb541d45ecc04dc5d3f80a3af9060c390ae7f5
CRs-Fixed: 2634373
Currently MCS parameters are not getting correctly in
wiphy which results in incorrect capabilities for iw list
command output.
To resolve above issue, update MCS parameters correctly in
wiphy band capabilities.
CRs-Fixed: 2633314
Change-Id: I830ad50aa4842bd2a79c97ed7b11b82c35148ff0
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES
QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS
QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI
Change-Id: Ia67c9c1d4839e5061f25971578830714abcd66ff
CRs-Fixed: 2633596
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_SETBAND
QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE
QCA_NL80211_VENDOR_SUBCMD_OTA_TEST
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB
QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY
QCA_NL80211_VENDOR_SUBCMD_STA_CONNECT_ROAM_POLICY
QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG
QCA_NL80211_VENDOR_SUBCMD_TSF
QCA_NL80211_VENDOR_SUBCMD_WISA
QCA_NL80211_VENDOR_SUBCMD_GET_STATION
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH
Change-Id: Ibc9ec144eac63a8dab19e01c1718d17ea5cabb35
CRs-Fixed: 2633912
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES
QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES
QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO
QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE
QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION
QCA_NL80211_VENDOR_SUBCMD_NAN_EXT
QCA_NL80211_VENDOR_SUBCMD_NDP
QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET
QCA_NL80211_VENDOR_SUBCMD_ROAM
QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER
QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD
QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY
QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA
QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN
Change-Id: I714c8b21a95144f7ed8ff4c6e038782e469edf3d
CRs-Fixed: 2621308
Currently the roam failure reason string size is 40 bytes.
Change this to 50 bytes to avoid truncation in some failure
cases.
Change-Id: I6c90e31fc792078354e98c7a5c61ffd5583469c3
CRs-Fixed: 2637901
The default value of ini gDualMacFeatureDisable is 0 and this
enables DBS scan with simultaneous scan from upper layer to
firmware. P2P scans get priority over sta scans and when
continuoes p2p scans are issues from some userspace application,
STA doesn't get scan time and APs in the environment are not
seen the scan results on STA interface.
To avoid this, change the default value of the gDualMacFeatureDisable
to 6, which disables simultaneous scans from upper layer to the
firmware.
Change-Id: I7ea3ed521270fc50acba30f84749d35ee60fcaa0
CRs-Fixed: 2632562
Presently vdev delete is sent to firmware 1st and the object manager
vdev delete is deleted after all the references are released.
With this change the vdev delete is sent to firmware when all the
references are released and the vdev delete is sent to firmware via
the object manager vdev delete notification.
Change-Id: I67bea0d2b2a0d2d9eb4602e5d0b8bbdcafdd4d26
CRs-Fixed: 2618278
In hdd_softap_deregister_sta, cdp_clear_peer may return fail
as peer has been deleted in other path, but the free of sta_info
will be continue.
So in hdd_softap_stop_bss, it will still access mac address
from sta_info, which will cause use after free.
Fix:
Even cdp_clear_peer return failure, it is expected, so only
log but not return failure to caller function.
In hdd_softap_stop_bss, remove mac address info log as in
hdd_softap_deregister_sta, there has been enough log for
each failure case.
Change-Id: Id06c78cb8d215488eb34d8412359ac2d684756d5
CRs-Fixed: 2637287
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.4 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL
Change-Id: Ifbeba29b5c3c7783217ed5f2352286e5537753e6
CRs-Fixed: 2633340
For SAE connection, if sta has a PMKID cached from previous
full SAE authentication and uses it for the open authentication
with the AP and if the AP rejects the association with invalid
pmkid (53), then the STA tries association with next AP. This
could result in association with a low score candidate.
Retry association with same AP, with full SAE authentication,
if AP rejects association with reason code invalid pmkid. Limit
the retry count to 1 per AP.
Change-Id: I5b26822ff9bbeea51de1b80852d5d325d28bf17f
CRs-Fixed: 2625987
Currently when association reject with reason code 53(invalid
pmkid) is received from the AP, then we delete the pmksa entry
for that AP from csr_session, but with converged crypto component,
the entry needs to be deleted from the crypto pmk table.
Else when associating to the same AP again, driver will use the
stale pmk for the AP again.
Delete the pmk entry from crypto pmk table when association
reject is received from AP with reason code 53.
Change-Id: I54f4a7ee7e02d35e0560bfad9fe2e3466aaa361d
CRs-Fixed: 2636570
A unknown symbol sme_get_roam_scan_ch() error will happen when
probing wlan module without the enablement of FEATURE_WLAN_ESE.
Move the definition of sme_get_roam_scan_ch() out of the body
of FEATURE_WLAN_ESE.
Change-Id: Ie39133778b6e569d40ee05bffff5c27343f1507a
CRs-Fixed: 2634396
Currently CONFIG_WLAN_WEXT_SUPPORT_ENABLE is unconditionally enabled
in many defconfigs, including the default defconfig, but this leads to
build failures when WEXT is not configured in the Kernel. So update
the defconfigs to enable CONFIG_WLAN_WEXT_SUPPORT_ENABLE only when
CONFIG_WIRELESS_EXT is enabled in the Kernel.
Change-Id: Iecfd4e899c2b09c489547dd1a8ff70f71983853f
CRs-Fixed: 2620792
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE
QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES
Change-Id: I4ad3d952d2af8f1d7f37179f9c92b0e77fc2eb23
CRs-Fixed: 2635755
Race condition between ifconfig and ipa uc event handler thread.
While ifconfig thread creating vdev1, the vdev is locked, ipa uc
event handler thread tries to lock psoc, becomes failed for 1
dev locked, gets error EAGAIN but doesn't try again. IPA uc
event is abandoned without handling.
Fix:
IPA uc event handling can't be abandoned but can be blocked
since it is called in separated work thread, block DSC API
should be used here.
Blocked Operation and Transition have no much difference in DSC,
and they need block each other too, should share same
completion and queue, can share same API.
With WDI 3.0 over GSI, WDI control event is not needed. Therefore
provide a wrapper API for wlan_ipa_uc_send_wdi_control_msg().
Change-Id: Idceff767d62c1e81046a696cb58f70a897cbd074
CRs-Fixed: 2618490
Add new ini CFG_SET_SAP_XLNA_BYPASS under fw_offload to allow host
to pass config to FW. WMI_PDEV_PARAM_SET_SAP_XLNA_BYPASS makes the
SAP xLNA bypass configureable.
Change-Id: Ie501005f3035f14b3f23cdd260f401a6af81b798
CRs-fixed: 2632088
These debugfs files are to replace wext cmd setUnitTestCmd
/unit_test/wlan_suspend/wlan_resume.
unit_test_host:
/sys/kernel/debug/wlan_xx/unit_test_host
wlan_xx is driver name
unit_test_target:
/sys/kernel/debug/wlan_xx/unit_test_target
wlan_xx is adapter name
wlan_suspend:
/sys/kernel/debug/wlan_xx/wlan_suspend
wlan_xx is adapter name
wlan_resume:
/sys/kernel/debug/wlan_xx/wlan_resume
wlan_xx is adapter name
Change-Id: I1ddf44b47a3f0d2e11ff74022dc1a26888da974c
CRs-Fixed: 2631424
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME
QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT
QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT
QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER
QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS
QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS
QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL
QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES
Change-Id: I1fa51d2fdf75a20098fe651769352d69d8fbd48c
CRs-Fixed: 2633726
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to ve verified against while
registering wiphy to the kernel.
To accommodate these changes, add policy for all the following
vendor commands that are being registered in the driver
QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT
Change-Id: I33498d0980e96d7aca6c1cf3da8941654d2d6380
CRs-Fixed: 2633925
