Check and update register sequences for wcd9395 version
2.0.
Change-Id: I85fc739744ee2ba2c5dbdc853eb639b84cac6478
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Add scale and alpha register value updates based
on computed digital xtalk cancellation gain.
Change-Id: I8c12e2ba7c1566476741fec5459a74549f19cf5f
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Update wcd939x-usbss mode on PA enable and disable.
Change-Id: I73a19ea73102ced5c8011a5a1567ebfa372b2e44
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Harmonium supports full and half rate modes for DAC.
Update DAC rate to swr clkdiv2 to achieve better
power performance.
Change-Id: I136a064dc258ee839ea78c9f1051ba34521ac871
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Get the wcd939x power mode of from mixer ctls and configure
same power mode to wcd-usbss.
Change-Id: I9dc8fe586f7e7608da542b0986bb7c605fc552d4
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
For wcd939x LDORT_SCD_INT IQR register is removed, so remove
LDORT_SCD_INT register to avoid CMD ignore errors from RX SWR
while booting.
Change-Id: I6dfe6a1c32fddbcdbbf388b47efde60b6b4b5f35
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Disable legacy HPH surge protection
for certain platforms. Enable HPH over-current
protection for all platforms.
Change-Id: I147321417ad2152530a71b3990a7cbf064c9299f
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Add support for HPH 2Vpk output mode in the
WCD939X driver.
Change-Id: I44a84cde84f0feee6d7d1255e097a5ffb616f78e
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
update HPH power mode comparison with mixer ctls enum names,
so this will pick the correct compander coeff values depends on modes.
Change-Id: I42cdfeceda4c4bac960b71bbd62d0e8528680490
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
For PCM mode no need to enbale PDM interrupts, so add condition
to skip for register of PDM interrupts. Also avoid unwanted register
writes for PCM mode.
Change-Id: I4675a7ffe94d1f8628a4f539829f5aa83544cf8d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
update register based on latest version and add conditional
check to enable PCM path.
Change-Id: Ib2fe0b477adfa07bef52954993fbd6aae011500a
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
update registers based on specific hph mode before compander
config.
Change-Id: Iea4f2bc5521dc701bd52ce8fe24323b1f9d96045
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
add support for compander to enable and disable for HPHL and HPHR
in wcd939x.
Change-Id: Ib7aa96bd9faac7389b38f01baff0a93c646f84f2
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
On wcd939x contains only one variant. Sometimes reading
for codec variant which is giving incorrect/unsupported,
due to this incorrect mixer ctl are picked. So Wcd939x
is updated with supported variant WCD9395.
Change-Id: Ie556350b3630b6f1f76a4b2af1db795f908f13d4
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
update register name in regmap and tables.
Change-Id: Ia1da74478b51dd094da2be74d621f91cf4e22ff9
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
enable impedance and calculations according to wcd939x.
Change-Id: Id0c2c7ebea6941dadbe501d388bdedc265e93db6
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Use BIAS_LEVEL_OFF trigger from ASoC to mark the wcd/wsa power
supplies to LPM (if supported).
Change-Id: I89f232f9338168b99ae03f84318c21734b592f82
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
add mux in b/w IN1/2 and RX1/2 for configuring xtalk and
compander in hph pcm sequence.
Change-Id: I5ee97017585d03e0ef83841bbccef5982d79b9d9
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Update wcd939x api and marcro in pineapple driver
Update wcd939x macro in wcd939x driver.
Change-Id: Id87fc550e0a3aff61efee61644fd6bc15ea7c66d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
