Even if HW cookie conversion is enabled on KIWI, there is some
case HW cookie conversion might not be done by HW, check the cookie
conversion done bit and get Phy Address accordingly.
Change-Id: I4ee7ed9776086812774637f07da1e4504898c3c4
CRs-Fixed: 3153433
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Include a UTC timestamp when constructing the CFR header,
represented as a 64-bit nanoseconds value.
This will allow for better correlation with ground truth
data.
CRs-Fixed: 3156826
Change-Id: Ie77d5e433346f21c3876930a2b8cbfa528affb20
Populate rate index in user specific rx ppdu indication.
Also correct the computation of total retries in rx ppdu indication.
Change-Id: I07c55260def9d2f1490729b6390bca3d98085c63
CRs-Fixed: 3156428
Add API target_if_get_active_mac_phy_number to get max
active MAC-PHY pairs from target IF.
The API will loop through all HW mode and get max MAC-PHY
number in all HW modes.
Change-Id: I2755197c043f9d2df6f8aaf6bf50093a2d1b1596
CRs-Fixed: 3154072
For a 6G frequency, if it is not part of the current power mode's
master channel list, then it is not possible to convert the frequency
to a channel number and is return as 0.
The input frequency might be part of some other power mode's master
channel list. So consider all the power mode to calculate channel
number from frequency.
Change-Id: I5810744504b5b11d728cc2abacc02e64a4accfcd
CRs-Fixed: 3142048
Use NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE instead of
NL80211_EXT_FEATURE_PROTECTION_OF_RANGING_NEGOTIATION.
Also remove NL80211_EXT_FEATURE_SECURE_RTT advertisement
which is not required.
Change-Id: I5ba3da86125719f410c925ef40441acddc40ab9a
CRs-Fixed: 3154060
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Add the following stats.
- Number of Spectral events received from the target
- Number of consume_spectral_report() invocations
- Number of fill_samp_msg() invocations
- Number of SAMP messages that are ready to be sent to the user-space
- Number of SAMP messages queued to the user-space
Change-Id: I53fda4b309620043a77bc2bc87573941d7fb0bcb
CRs-Fixed: 3156151
Update the MPDU start and MSDU end word mask while setting
up rx monitor filter.
Change-Id: I17c5d809300cd2d4fc8d3b63d5e8a3d40f599a7a
CRs-Fixed: 3145449
Update dma length and mpdu logging for different packet
types while setting up monitor filter
Change-Id: I408860f15686c7999655c1e84dce5a3f7ffbbed7
CRs-Fixed: 3145400
Changes to add chip crash info in global shared mem arena
and expose the respective APIs to qca_ol.
Also add APIs to process global link info tlvs in order
to offset to crash info.
CRs-Fixed: 3121465
Change-Id: Idabf9fb8d4755bdd755897b3c09d2e28259a6f46
Changes to move the global shared memory arena init deinit
APIs from MGMT RX REO cmponent to MLO component.
CRs-Fixed: 3121467
Change-Id: Ie5ca50780ffb3343d225b6cf6acfa569463d5a3e
Move the global shmem common APIs (init & deinit) from REO
component to MLO component.
CRs-Fixed: 3122203
Change-Id: Ib52490c0e9662d6297a52af365e1d87b60e0739d
Get the channel list for 6G band for a given power mode. When the power
mode is REG_BEST_PWR_MODE the 6G channels will contain all the channels
supported by the reg domain irrespective of the power mode.
Change-Id: Ia1a3757685d477a2a2565eb89422fc039ca3b5dd
CRs-Fixed: 3141999
These macros define the min & max time from TBTT, when the scan
dwell time starts. They can be used as a parameter to the scan
WMI command.
CRs-Fixed: 3154082
Change-Id: Ieca8acfd2e6897a8e45fafaaffd8f283f451d203
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
In case of MLO, when connect is in progress and disconnect is received,
there may be a possibilty that the assoc link's bss peer is deleted
before non-assoc link's connect is still in progress which can lead to
issue in peer setup at DP and FW.
Add fix to handle mlo disconnect while connection is in progress
Change-Id: I550abff439deca19c7ab355cae1fa46db1f0f61b
CRs-Fixed: 3152770
Add support to clear mld soc setup and link down
such that in case of teardown fails counters are updated
properly.
Change-Id: I5dc8c581069ef1d5bd0614568b435c0a9448fdcc
CRs-Fixed: 3127308
Remove redundant field for rxmon global enable
and fix writing global enable field to correct
dword
Change-Id: I4efc0da559dce873bcb8721aeb0d7b7410b39dd9
CRs-Fixed: 3150784
If Vendor IE also presents in STA profile, it only needs
to copy the vendor IE from STA profile for link specific
frame and reported BSSID.
Change-Id: I48ed4e88f097fe6570b3f3df764cd707c4b758d3
CRs-Fixed: 3136382
Fix build issue on kernel5.10.
error: implicit conversion from enumeration type 'enum reg_6g_ap_type'
to different enumeration type 'enum supported_6g_pwr_types'
[-Werror,-Wenum-conversion].
Change-Id: Ib15ed20036f2472b567acee2e4d24d3e6bfe1956
CRs-Fixed: 3154541
When SAP off and psoc idle shutdown happens before NOL timeout,
DFS pdev obj is destroyed, NOL timer is cleared, NOL channel
is failed to clear for regulatory pdev obj is freed already.
To fix it, let NOL timer and NOL be cleared in dispatcher_pdev_close,
before pdev destroy and regulatory pdev obj destroyed.
Change-Id: I5818f8a0284a6c45e8a435ac59269df73507deeb
CRs-Fixed: 3151099
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
Kiwi target does not used TX cmd credit ring.
Hence disable the tx cmd credit ring for Kiwi.
Change-Id: Ibd5fe2905a7362ea2ab89e65d77c7aea6ab259ee
CRs-Fixed: 3150814
Few APs are sending bar frame right after sending a
packet but the packet is not received and its retry
is received with the same sequence number. As SSN
is moved ahead due to bar frame, this packet is being
dropped.
To fix this, allow all frames to get delivered to stack.
Change-Id: I17f7126c8d318415e88b037b72563cf53cb14066
CRs-Fixed: 3151908
Update PPDU specific fields in Rx monitor HAL parsing.
Also correct the offset to be used for user info in EHT_SIG_HDR.
Change-Id: I9dd133d3617754475f097b54b6e1e460f2e67baa
CRs-Fixed: 3153475
Access dev from scn instead of pci_dev since pci_dev
can be null for some chipsets like QCN6122
Change-Id: I80c1c13df999f5df900f5cde23d636ed15c551fc
CRs-Fixed: 3151171
By default, the regulatory module considers NOL channels as disabled
and these channels are excluded in channel search algorithm.
However, there are use cases where a search for NOL channel
is done and regulatory module fails to fetch the channel param.
Hence create an infrastructure to consider NOL channels
as "enabled" / "disabled" as per user's choice during channel search.
Setting "is_treat_nol_chan_as_disabled" flag to true considers
NOL channels as disabled and punctured.
The callers of reg_fill_channel_list() and
reg_set_channel_params_for_freq() APIs should set the flag
"is_treat_nol_chan_as_disabled" as per the desired use case.
CRs-Fixed: 3134870
Change-Id: Iae7cea18ecfd5e9972ea8e6934828898a6cd1e74
Move the following APIS from component dev to cmndev.
1. reg_get_nol_channel_state
2. reg_get_5g_chan_state
3. reg_get_5g_bonded_chan_state
The purpose of these APIS is to consider NOL channels' state
as "enabled". This is used in reg_set_5g_channel_params_for_freq() and
reg_fill_channel_list() API to get the channel state based on
user flag "is_treat_nol_chan_as_disabled".
Change-Id: I174e365e7e5ece8ac5fb082dd92eb76be3126cc6
CRs-Fixed: 3149470
No TWT session params can be a debug log since it is not fatal
and need not be printed to console. In multi-client tests,
this can cause too many prints since upper layer polls for the
stats periodically.
Change-Id: I7a4cac9202ac15c430910864d0f863e1193ea569
CRs-Fixed: 3150799
Tag ITO config wmi cmd sent during RTPM suspend, or immediate
RTPM resume will come, RTPM suspend will fail.
Change-Id: I43952b013fd37f15b44252ae5f19e0e2c06d6064
CRs-Fixed: 3150683
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
Add handling for jumbo pkts in debug version on qdf_nbuf_unshare to
resolve false positive alarms.
Change-Id: If18f81490f145de21d01c19e868252274c7dfefa
CRs-Fixed: 3145824
Extract the regulatory channel priority value as part of the
wmi_regulatory_chan_priority_struct, sent by the target, through the
WMI_REG_CHAN_LIST_CC_EVENTID.
CRs-Fixed: 3143309
Change-Id: I3fe21c47fc0faa1b69525614bcf990f5ab1d5a79
If a Radio supports 6G band channels, the ACS is expected to give
priority to a set of channels that are above a certain (threshold)
frequency.
Store the extracted threshold frequency from WMI into regulatory
component.
Add a new API reg_get_thresh_priority_freq to get the threshold
frequency received from the target.
CRs-Fixed: 3143318
Change-Id: I8676ce56e68b5a4eb4e4b64415dc293e086472f0
Add WMI support to set PN Rx Filter which is used to forward
frames to host upon PN failure.
Change-Id: Ib32abc681e17e1a6189a295314a497fc0c21b15a
CRs-Fixed: 3150832
