Randomize bss color within 1 to 63 When hostapd.conf does not specifies
bss color parameter.
Change-Id: I5650d15836e19bd0efc226f86b22a8697e45c59e
CRs-Fixed: 2200411
Set the default addba buffer size to 64 and advertise the default
value in addba response frame.
Change-Id: I8eec73c0907b42414bc742ae01b921b9e4e5b6d5
CRs-Fixed: 2204110
The ucastSig and bcastSig fields in tSirTdlsAddStaRsp date back
to a previous version of the driver that used these signatures to
synchronize the data plane with the control plane. However the current
version of the driver does not use these parameters, so remove them as
the final stage of the plan to completely remove these signatures from
throughout the driver.
Since the legacy tSirTdlsAddStaRsp data structure must exactly match
the converged struct tdls_add_sta_rsp, this change is co-dependent
with the qca-wifi-host-cmn change:
qcacmn: Remove DPU signatures from TDLS Add STA Response
Change-Id: I7750fac9e4870d75358606bea427a5dbab97c665
Change-Id: I765b090fc5dbe9bdaf83b05a72223c0a12f71a18
CRs-Fixed: 2200996
In a previous version of the driver both unicast and broadcast DPU
signatures were used to synchronize the data plane with the control
plane. However the current version of the driver does not use this
synchronization mechanism, so remove propagation of the DPU signatures
from the UMAC. This is part of the plan to completely remove these
signatures from throughout the driver.
Change-Id: I6a1808d0905bb0c4550b16cf2b2157a529caa9e9
CRs-Fixed: 2200997
In a prior version of the driver DPU signatures were used to
synchronize the Data Plane with the Control Plane. The DPU signatures
were provided to HDD by SME via fields in struct csr_roam_info, and
then HDD provided the fields to the Data Plane. But that mechanism is
no longer used and HDD does not read these fields so remove them along
with the logic that is currently used to fill them.
Change-Id: Ib056c20683e6b4f0d969fcff227476d53e040cc0
CRs-Fixed: 2200995
Currently, hdd_reset_all_adapters will set hdd_reassoc_scenario
as "false" no matter what adapter's dev mode. It may pollute the
session.ap's content.
Change-Id: I339982e5454d7ef5bd4325b0901c4a81ceed6ab9
CRs-Fixed: 2201535
Change "qcacmn: Remove obsolete TDLS peer callback interface"
(Change-Id I32bb1f633b1dd1514aa6e4c3fdea044b3bca0009 in project
qca-wifi-host-cmn) has complete removed the old TDLS peer callbacks;
the new callbacks are the only ones supported. Therefore remove the
usage of USE_NEW_TDLS_PEER_CALLBACKS which was previously being used
to select the new callbacks.
Change-Id: I6b82b563e060727dfd02bfea40e4439ea09d7f75
CRs-Fixed: 2200994
Change "qcacmn: Introduce new versions of TDLS peer callbacks"
(Change-Id Id4ea23266b0f3e1480b645c5afce6c17585ccb46 in project
qca-wifi-host-cmn) introduced a new interface which removed an unused
parameter and changed obsolete naming. Update qcacld-3.0 to use this
new interface.
Change-Id: I5c4684ac0a62f314da26f92ece2c9a9874d63634
CRs-Fixed: 2200993
The hdd_reset_all_adapters won't reset the txrx_vdev & tx_fn in the
adapter, which will cause the issue if the OS still deliver the packet
before the txrx_vdev registered again after SSR happens.
Deinit TX/RX module when doing reset all adapters during the SSR
procedure to avoid this problem.
Change-Id: Ia16b488c63b691fe9c3cc8c2cd49913b27cc32f0
CRs-Fixed: 2197248
Aligning structure variables properly can reduce memory requirement
of data segment. Thereby reduces over all memory requirement.
Change-Id: I8b1a704cb6ed852d23111b6ee9d14c883b889a78
CRs-Fixed: 2203674
In the present scenario, the vendor command
wlan_hdd_cfg80211_get_logger_supp_feature has the flag
WIPHY_VENDOR_CMD_NEED_RUNNING set which requires the net device
to be up and running for the API to work. This is not necessary
as the command doesnot need the net dev to be active.
Remove the flag so that the command returns the proper results
even when the net device is not running
Change-Id: I2dd9d801aa474cda2a3f6292d6b94df18797be02
CRs-Fixed: 2202096
Latest driver is not using "gFixedRate" INI anymore and this INI
is not doing any meaningful work, so remove it.
Change-Id: Icf7ef052a722f25c4338dd8086b14ce01c6176d8
CRs-Fixed: 2201799
Add support to send ADDBA request with user configured buffer
size and tid and ADDBA response with user configured buffer
size.
Change-Id: I2a1dfedadeb68a1cfca9a6eba8e7775d0bb51d1a
CRs-Fixed: 2193872
Building CLD3.2 with a performance configuration results in several
"potentially uninitialized" warnings. Initialize the relevant variables
to avoid the warnings.
Change-Id: I6a4324cb313dfb9d3b4c82294bc2fc8ce357fd0b
CRs-Fixed: 2202533
In CSA handling after vdev restarts, program peer_phymode before peer_ch_wd
to firmware, since firmware cannot handle higher channel width than current
peer_phymode.
Change-Id: I12ce1a6e6c0af758e1ecc9c1d272320e5e800983
CRs-Fixed: 2201944
If wlan_hdd_mgmt_tx is called while unload in progress, it is possible
ROC scan can't be canceled, cds_ssr_protect already prevent
wlan_hdd_mgmt_tx running before unloading, we must also prevent it
running after it.
Change-Id: Ic8d981c9be2a2b33079c4e3c9a18a4d8bce48956
CRs-Fixed: 2202026
In lim_tdls_setup_add_sta() even if a pStaDs is already present and
is a non TDLS peer, the driver proceed assuming it as TDLS peer and
update its type and states.
Now when driver tries to delete this non TDLS peer, as its states
and type are modified it fails to properly clean up the peer.
Fix it by allowing only TDLS entry to be updated. Also ignore if a
entry is already present and the operation is TDLS add.
Change-Id: I65fc73d65cdf768fd5b8afd050ca7314fd55c9ff
CRs-Fixed: 2200498
Add compilation flag to compile out HTC credit History
feature cleanly from the cld-3.2 driver binary.
Change-Id: I5f5e73e430d282c99d3077fb82ed1cb8eb79715a
CRs-Fixed: 2190545
Change "qcacld-3.0: Use Request Manager for ioctl getWlanStats"
removed the only user of item hdd_qdf_event in struct hdd_wext_state,
so completely remove it.
Change-Id: Ifc00f6dc396ca5f6e59b3895a6c9467179073218
CRs-Fixed: 2202506
Currently the handling of private ioctl getWlanStats uses a legacy
mechanism for coordinating the request with the response. Change this
to use the HDD Request Manager.
Change-Id: I7e8333cf8d2e651e04509e3370c30d8a6425bdca
CRs-Fixed: 2202504
Function hdd_statistics_cb() is registered as a callback function by
__iw_get_statistics() when calling sme_get_statistics(). Since
hdd_statistics_cb() and __iw_get_statistics() are tightly coupled it
makes sense for them to be co-located, but currently they are
not. Therefore relocate hdd_statistics_cb() to be adjacent to
__iw_get_statistics(). Note that this is a precursor to further
cleanup of this pair of functions.
Change-Id: Ie36d107d9ef2e541444c5fb9d7bfba7e9e82c1e6
CRs-Fixed: 2201907
The parameters to function hdd_roam_register_tdlssta() currently
includes ucastSig. This "signature" parameter dates back to a previous
version of the driver that used signatures to synchronize the data
plane with the control plane. However the current version of the
driver does not use this parameter, so remove it as part of the plan
to completely remove these signatures from throughout the driver.
Change-Id: Iee51d79e58501e3e8312c6c7a21b98c1ae6bf268
CRs-Fixed: 2200886
The parameters to function hdd_softap_register_sta() currently include
ucastSig and bcastSig. These "signature" parameters date back to a
previous version of the driver that used these signatures to
synchronize the data plane with the control plane. However the current
version of the driver does not use these parameters, so remove them as
part of the plan to completely remove these signatures from throughout
the driver.
Change-Id: I1f1f1fb1ef553d36ba0f4902ab29b2b4852ae5ca
CRs-Fixed: 2200356
