The following change introduced a misspelling of "threshold", so fix
it.
- Change-Id Ie98a1b8681f41f3a63523ac40b5cfb688a7b0cb0
qcacld-3.0: Handle VENDOR_SUBCMD_SR and operation
Change-Id: I255ef45d9978ce777a41564f0d05e6d99efe5a4b
CRs-Fixed: 3319363
Firmware handles all NAN concurrencies in the platforms which
don't advertise the WMI service cabability
WMI_SERVICE_NAN_DISABLE_SUPPORT. Host takes care of the NAN
concurrency if the capability is advertised by firmware.
But there can be some legacy targets where firmware wants to
offload NAN+TDLS concurrency alone to the host and it takes care
of rest of the concurrencies. This is to make NAN of higher
priority and disable TDLS when NAN is active. Currently, TDLS is
of more priority than NAN and it can't change the order as it
can't disable TDLS to change the priority.
Currently, driver doesn't parse the NAN messages(even NAN enable
request) in such platforms. Parse the NAN messages and disable
TDLS upon NAN enable request. Rely on NAN state machine to
allow/disallow new TDLS requests. This needs NAN enable status.
Change-Id: Ie9c7c1cc2f1ed6328a31b93077c2928940fc3450
CRs-Fixed: 3263730
If link beacon is not scanned, host driver will send ML probe request
and generate link scan entry from ML probe response. The ML probe
response does not include RNR IE. This is causing failure in the link
vdev connect path as the partner information is updated from rnr ie.
To fix this, for link vdev connection get partner link information from
connect request.
Change-Id: Id22f57cefbf28cb20fa7e17b4b71b362b1ba0ae5
CRs-Fixed: 3312421
Don't allow ML links to form MCC, if second
ML link is trying to form MCC then send disable
to FW and FW will decide which link to be disabled
to avoid MCC. Similarly if any SAP/P2P link disables
then ML STA link shouldn't enable back if it can cause
MCC with existing ML link.
Change-Id: I9bd8e257ad3fc3ee54d9e9d79c66962469b0b827
CRs-Fixed: 3313944
For eMLSR mode, the lower 27 bits of hw_mode_config_type
are HW mode and higher 5 bits are MLO Cap flag.
To update MAC frequency info correctly, get hw mode type
for eMLSR by macro WMI_BECAP_PHY_GET_HW_MODE_CFG().
Change-Id: I18a0afb26985b6ccda091fa1564713af0260353f
CRs-Fixed: 3314401
Host driver expects maximum of WLAN_UMAC_MLO_MAX_VDEVS links
info in roam sync indication. But firmware may send more
number of links than expected and it may lead to buffer overflow.
Add a check to validate the number of links.
Change-Id: Id89d23470622ba3ca7e01a99cc7c12021ca3dafd
CRs-Fixed: 3314460
With MACRO FEATURE_WLAN_CH_AVOID_EXT enabled,
"restriction_mask" can only be checked if
coex_unsafe_chan_nb_user_prefer = 1. If the INI
coex_unsafe_chan_nb_user_prefer = 0, do not need to check
"restriction_mask". It will remain uninitialized 0.
Change-Id: If7bd1223ee3779b72fadb40e622f682db03f4ea5
CRs-Fixed: 3287634
In case of MLO to SLO roaming, the connected links
bitmap is not reset for link vdev correctly.
To solve this post roaming, clear and then set the connected links bitmap.
Change-Id: I9e63593fe3452d0c2075360432dfaddc81999ae0
CRs-Fixed: 3317229
Currently, this MLO flag is being set/clear without regard for
concurrency. We need to lock the vdev when updating these values to
prevent race condition.
Change-Id: I7b1e6424d6fcedc6934a9f6aa1d01068a2b43277
CRs-Fixed: 3305564
If user sets flag ASSOC_REQ_DISABLE_EHT in connect request, driver
will send action oui "ffffff 00 01" to host mlme and also firmware
for action id ACTION_OUI_11BE_OUI_ALLOW, so that all the AP will
be not matched with this OUI and 802.11be mode will not be allowed,
possibly downgrade to 11ax will happen.
If user doesn't set ASSOC_REQ_DISABLE_EHT, driver/firmware will
recover to default oui setting.
Change-Id: I9eab732f1bd29018d44b215c1d6c9bfac9dafe95
CRs-Fixed: 3314489
Currently CH_WIDTH_MAX is set as default BW when sap do restart,
then apply some checking rules to get the final BW. It's possible
the final BW is greater than sap original BW. But a greater BW
isn't expected in some use cases where greater BW may introduce
some unexpected issues.
Add INI to configure sap original BW as default BW when do sap
restart as required.
Change-Id: Ie274a3eea73c2af9424a8b9ce21bee34eeaaef2e
CRs-Fixed: 3315486
This fixes a scheduler_msg CFI failure for function
mlme_wma_vdev_detach_post_cb().
Change-Id: I6271bf9de8d800aac8a804d1daf646063347a71c
CRs-Fixed: 3316558
Add check for QDF_MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNEL while
getting the sap mandatory frequency.
Change-Id: Ia1dfdfb0818ed94620295e3f4046fbe16b5a92d8
CRs-Fixed: 3301096
As part upgrading legacy APIs with 6 GHz power APIs
Replace all occurrences of
wlan_reg_is_passive_or_disable_for_freq API with new API
wlan_reg_is_passive_or_disable_for_pwrmode.
Change-Id: If8429146e3e4e4cb25505de9855671dca2eb6474
CRs-Fixed: 3306631
Check for 6 GHz channel for SCC was not there due to which,
6 GHz + 5 GHz(DFS) MCC was happening even if we are forcing SCC.
Change-Id: Iac02b1990ffa91a5b0688d6976bc38cbbd10acfb
CRs-Fixed: 3301115
If there is existing interface STA/GC/SAP/GO/ML STA and
low latency SAP tries to come then allow only if below
condition satisfies
1. DBS hw_mode: Allow if existing interface is on 2.4 GHz
channel otherwise reject.
2. SBS hw_mode: Allow if existing interface channel and low
latency SAP channel are mutually exclusive.
Change-Id: I67a883b89f63fa581379cb303da6c11b43e65912
CRs-Fixed: 3296640
SAP MCC with ML STA link is not preferred since SAP is only
allowed off channel for max 32 ms.
If All ML STA are 5/6 GHz band, force SCC will not happen
for 2 GHz only SAP. Inactive one link if both ML STA are on non
2 GHz band.
Change-Id: I3450a0e66e583320cb91cd549317a197e5d1e039
CRs-Fixed: 3307863
In hw mode change offload case, frequency of the connections
in table pm_conc_connection_list may be updated later than the
mac frequency info which is updated when processing hw mode
transition event, then the current concurrency combination
dump here which is inferred from mac frequency info and
pm_conc_connection_list may be wrong.
To avoid confusion, replace concurrency combination dump with
current connection status dump when processing hw mode
transition event.
Change-Id: I0d8db410b3db3aa4b35c27f227bc68f5852a86d3
CRs-Fixed: 3315452
Add new entry in the enum qca_conn_diag_log_event_type in
order to support EAPOL start packet.
Change-Id: I540ef257ee9425eef016302648844ebf01647372
CRs-Fixed: 3314689
Add a support to check if low latency SAP is present on 5 GHz
channel then do not allow SAP/GO to come up on 5 GHz for
both gaming and lossless audio profile.
Change-Id: Ibb9e3365522beec541f70c6c45b8cb68405fd3bc
CRs-Fixed: 3294748
Add a support to check if low latency SAP is present on 5 GHz
channel then do not allow STA/GC to connect on 5 GHz for
both gaming and lossless audio profile.
Change-Id: I8e1c62dfea3c27306e338392448f5cc6eed912aa
CRs-Fixed: 3302763
Low latency SAP is supported on DBS and SBS hw and it can come
up on below two profile
a. Gaming
b. Lossless Audio
DBS: Allow only 2.4 GHz channel for both gaming and lossless
audio profile
SBS: Allow non low latency SAP 5 GHz channel which are mutually
exclusive for both gaming and lossless audio profile.
Check whether low latency sap is present or not. If it's present
then get the frequency to validate the concurrency with other
interface.
Change-Id: I39715a01e63de612448d4d0f230e6ccb71b76b15
CRs-Fixed: 3294596
Userspace provide below vendor attribute for low latency sap
concurrency
a. QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG
This userspace uses the below value defined in enum
qca_wlan_concurrent_ap_policy_config to specify concurrency
policy
a. QCA_WLAN_CONCURRENT_AP_POLICY_UNSPECIFIED = 0,
b. QCA_WLAN_CONCURRENT_AP_POLICY_GAMING_AUDIO = 1,
c. QCA_WLAN_CONCURRENT_AP_POLICY_LOSSLESS_AUDIO_STREAMING = 2,
Convert this above enum value in host to use in concurrency
scenario.
Change-Id: Ibab06f528fd99d8c421376bd02e4c748e9556b70
CRs-Fixed: 3302418
Current code has wlan_coex_public_structs.h in qcacld, when it should
be in qcacmn due to convergence of the COEX feature.
Fix this by moving the header file to qcacmn.
Change-Id: Id45c85e0ff492d149cac71c8c0ca5443b879ef15
CRs-Fixed: 3289250
fix dp memory pre-allocation failure as below,
(1) add pre-allocated memory for extra contexts of
DP_RX_RING_HIST_TYPE on beryllium.
(2) add extra RXDMA_BUF type's memory for SW2RXDMA ring and size same
as RX refill ring size for now.
(3) add pre-allocated memory for REO_STATUS & RXDMA_MONITOR_STATUS ring.
(4) add pre-allocated memory for DP_MON_PDEV_TYPE.
Change-Id: I038d946cf1b8c9dc67c1539ea972bda8239def4d
CRs-Fixed: 3314198
Control Preamble Puncturing feature via INI "he_rx_pream_punc"
and UL MU-MIMO feature via INI "enable_ul_mimo".
Change-Id: Ib4d6fd10c9e4f46c1baa5070f94d8dddd4978757
CRs-Fixed: 3305742
Add INI g11be_oui_allow_list to config 802.11be AP oui which
is allowed to get connected in 802.11be mode.
If the INI is empty, all the ap are allowed to get connected
in 802.11be mode. If INI is set to "ffffff 00 01", then STA
is not allowed to connect to any AP in 802.11be mode.
Change-Id: I98e545ba909c1746237a20c365f8297f16fe666f
CRs-Fixed: 3304021
Check for HESIGA_VAL15_ALLOWED bit before enabling SR prohibit
in SR control field
Change-Id: Ie902941c7642d76901adbf5d685265c0552a814c
CRs-Fixed: 3308160
Add async event for Spatial Reuse and also send Spatial Reuse
enable / disable event to upper layer due to same MAC concurrency.
Change-Id: Idcb5b99e39f1810e63ae7ac1e8d2eab6028a163f
CRs-Fixed: 3307801
Add check for concurrency with SR, if SR with concurrency
is not enabled then disable the SR on existing VDEV as soon as
new VDEV is up.
When this new VDEV is disconnected, then enable back the SR on
the previous VDEV.
Change-Id: Id6aee592b889bb7006efb44420e6d272212e13ba
CRs-Fixed: 3306181
Send WMI_PDEV_PARAM_SET_CMD_OBSS_PD_THRESHOLD during PDEV
init with disabled PD-Threshold value to initialize SR related
registers in HW.
Change-Id: I49e73c76974e098b6dfbf647a898b53abf8ea2ba
CRs-Fixed: 3306179
Add below two enhancements for SAP
1. Spatial Reuse enabled in single MAC concurrency
2. Set bit HESIGA_Spatial_reuse_value15_allowed in SRP IE
Change-Id: Id2d3d04ae1b3b9a2e6d84f30749b577bc7b79061
CRs-Fixed: 3305447
Add support to parse VENDOR_SUBCMD_SR and to parse
nested attributes OPERATION and PARAMS and to handle
ENABLE operation, Disable operation and prohibit
operation. Enable opeartion may have PD threshold
or in case vendor command doesn't provide PD threshold
host will send PD threshold advertised by AP.
Change-Id: Ie98a1b8681f41f3a63523ac40b5cfb688a7b0cb0
CRs-Fixed: 3299042
SPMK global cache in the vdev private is persistent
across connections. Therefore, in cross-ssid roaming
cases with different AKMs, SPMK in the global cache
will always be sent to the firmware in RSO start, even
for non-SAE connections. This causes roam failure.
Reset the spmk global cache for every new connection.
Change-Id: I03deefe16242ef79d0985a8c05881914e6f7af01
CRs-Fixed: 3310182
Add changes to enhance the debugs in the RSO path,
to identify the current pmk stored in the rso config.
Also, restrict the PMK dumps to a minimum size of 2.
Change-Id: I6e89afed45f5d43b45508ae43b59400a6e24e5ef
CRs-Fixed: 3312677
Handle twt renegotiation failure scenario when there is
error reported by firmware as part of
wmi_twt_ack_complete_event_id event.
Change-Id: I91e4bfd8f08ae81b474354c90ab8c770dcdfe19b
CRs-Fixed: 3297783
To protect user privacy, print SSID with QDF_SSID_FMT
and QDF_SSID_REF, then SSID will be hide in logs if
anonymization is enabled.
Change-Id: I3dd129b52c85c84e666f4f07b28a1e58f81259b7
CRs-Fixed: 3291841
Currently the AKM information is sent as uint16_t variable
this leads to truncation of 1byte in connecting event of
advanced connectivity logging.
Update the AKM data type from uint16_t to uint32_t.
Change-Id: Ibe359636cb32b66ed99ee8ccb8ce33299908325b
CRs-Fixed: 3307515
For STA mlo connection the AP might send M1 right after assoc
response on assoc link which can result in keys sent down to FW
for mlo links before host has sent wmi_peer_assoc for link vdev.
Current code does not have handling for this case.
To solve this, store the keys and once connection is completed
on link vdev send keys.
Change-Id: I3675451ef0e047caf8c77d256ea67f0eac6ed797
CRs-Fixed: 3289589
If is_pre_cac_on is set, in __wlan_hdd_del_virtual_intf firstly
frees the sap context by calling hdd_clean_up_interface and then
frees the pre cac by calling hdd_clean_up_pre_cac_interface this
will fails to access the sap context which is already freed.
So, replace order of calling, firstly hdd_clean_up_pre_cac_interface
and then hdd_clean_up_interface.
cds flush work will cancel the work which will not delete the pre cac
vdev. Replace with qdf_flush_work will wait for a work to finish,
executing the last queueing instance.
Assign NULL to fn and arg of pre cac work to ensure proper cleanup
of work
Change-Id: I093bf627ce7a73e7c4f7c4cf30e2ec56814a80ed
CRs-Fixed: 3286477
In management frame TX path from userspace, the
p2p_set_mac_filter structure is used and is defined under P2P
converged macro.
Converge this p2p_set_mac_filter structure to set_rx_mac_filter
structure in qca-wifi-host-cmn to use this by all components
Change-Id: Iefcf36f8b327458b2418bd364ae84b28ca56e7f9
CRs-Fixed: 3306700
To avoid wma_vdev_detach_callback() is run under interrupt
context, post wma_vdev_detach_callback() to driver scheduler
when vdev delete is failed to send to FW.
Change-Id: I87a603de326789ac43dac34de31eb564f13d11f5
CRs-Fixed: 3308547
With FEATURE_WLAN_TDLS=n, compiler is throwing implicit
declaration error of function wlan_tdls_get_features_info.
Hence add wlan_tdls_get_features_info stub declaration for
FEATURE_WLAN_TDLS=n.
Change-Id: Ia9820e630b756befbfda98330be193760a331c93
CRs-Fixed: 3309612
Build failed once WLAN_TRACE_HIDE_MAC_ADDR is enabled,
due to 'error: type mismatch in conditional expression'.
To fix it, correct the parameter for QDF_MAC_ADDR_REF.
Change-Id: Ifd89b02ab5fb2e3b59291c303ad93b691616dc57
CRs-Fixed: 3308193
In case if supplicant issues probe request without ROC,
Host should drop it for STA mode.
Change-Id: I290f441f6ddc41dd8d7434ad7d4fd1b4fcc0c22e
CRs-Fixed: 3296264
Currently for mlo roaming if roam sync event is not
handled roaming is aborted only on that vdev,
other vdevs are not cleaned up.
Another issue is link vdev is added to connection manager
list but not removed.
To fix this code change made to abort roaming on all links.
Also remove request from connection manager list.
Change-Id: Ib6e9db21b64e5c44ab7d51ebf795b169c5e7eb29
CRs-Fixed: 3305685
Currently, host driver sends NAN enable and disable request to
firmware and wait for its response to change the NAN state in
driver. But, when firmware is down (during SSR), driver is in
recovery state and so, timeout occurs while waiting for response.
To fix this, driver does not need to wait for NAN enable/disable
response from firmware in recovery state. It can directly take the
action and change the NAN state machine. Hence, add flag to check
the driver recovery state. If recovery is in progress, then driver
does not wait for firmware NAN enable/ disable responses.
Change-Id: I0325240cc082d8ef91d48793d3da2eea552d59cd
CRs-Fixed: 3307543
