Currently, in hdd_sta_akm_suites akm suites are added
without verifying that these are supported by kernel
or not. Support for WLAN_AKM_SUITE_8021X_SUITE_B and
WLAN_AKM_SUITE_8021X_SUITE_B_192 akm suites is added
from kernel 4.12 that can cause compilation issue for
kernel version lesser than 4.12.
Fix is to add a check of kernel version for
WLAN_AKM_SUITE_8021X_SUITE_B and
WLAN_AKM_SUITE_8021X_SUITE_B_192 suites before adding
as an element in hdd_sta_akm_suites.
Change-Id: Id8c5d1e01da62d63cfe99353e5f9dae5814baaf9
CRs-Fixed: 2667625
Do not send the reject AP list to FW if the driver
is in recovering state (SSR) as the FW is already
down.
Change-Id: I31d815e215ca703574348a287f294da46937670f
CRs-Fixed: 2667934
In case wait for ready event timeout from fw, need to
suspend fw firstly, otherwise fw is not aware host
will free resources.
Change-Id: Ifb7ab7fcf0cf468d59dc462dfdb27851fa4e596e
CRs-Fixed: 2669433
Currently, the driver trims the channel list with
the PCL if external acs policy ini is set, and
if the channels are unsafe then that can lead
to 0 channels and the SAP can fail.
Fix is to check whether the force SAP start ini
is set and override the channel.
Change-Id: If245bf27deda0f6022343d7a175520fdd92d106b
CRs-Fixed: 2667742
If FW ready event is timed out, then add debug panic such that we can
collect FW ram dump reliably.
Change-Id: I61f19023675ec6d7bb4ff882d4a08f0ffcee1607
CRs-Fixed: 2670314
In function sme_qos_ft_handoff_required(), CSR_GET_SESSION() is
possible to return NULL pointer, so add check before de-reference it.
Change-Id: Iee4e1d03da550969b4da1b746e4325f59ab72146
CRs-Fixed: 2669223
Currently, only broadcast disassociation is supported
and deauth is sent in a unicast manner.
With peer delete all support, HDD sends a single call
to PE for broadcast deauth request. PE module sends a
single broadcast deauth frame and on TX completion,
calls vdev_mgr_peer_delete_all_send. This issues the
new WMI_VDEV_DELETE_ALL_PEER_CMDID to FW to cleanup
peers entries corresponding to VDEV ID and also flush
TIDS internally.
On receiving the peer delete all response, target_if
cleans object manager entries and datapath cleans up.
But PEER unmap is done iterating through all peer entries
individually. After this a single eSAP_STA_DISASSOC_EVENT
is received in HDD signalling the completion of broadcast
deauth procedure.
Change-Id: I928461606154380eef21a02cc7306921ceb9e16e
CRs-Fixed: 2585005
If STA sends RSN IE in assoc_req for SAP in open network
then check this scenario and reject the request. This prevents
Host from sending WMI_PEER_NEED_PTK_4_WAY in peer
flags which results in a firmware assert.
Change-Id: I8696c9ae33670d019a9c662a3fa9420311fa0629
CRs-Fixed: 2625911
The WLAN_POWER_DEBUG feature flag for power stats is not properly aligned
in the commit Ic395f393580fcd59faa4e4676f67a39ff37bdd1a and hence it is
addressed in this change.
Change-Id: I40236efa31e1d832884984536597122c04ecc269
CRs-Fixed: 2668142
Set NL80211_RRF_AUTO_BW flags for all regrules.
Kernel will calculate max supported bandwidth based on
the NL80211_RRF_AUTO_BW flag for adjacent frequency
ranges dynamically.
Change-Id: I86e6dee2c58f92b6cf4d8a2c11f510cef948243b
CRs-Fixed: 2661969
Currently auto ps timer is disabled when device mode is not monitor mode.
This is causing issue when device mode is FTM when ps timer won't be
started.
To resolve this, add check for FTM mode also before disabling auto ps
timer.
Change-Id: I7cf493f10676e170fcb7e50e343bb0d20de4d89c
CRs-Fixed: 2667942
sta_sap_scc_on_dfs_chan isn't used in the module.
Hence, Removed from mac_context and csr_config_param.
Change-Id: I10321c26d2244b3619b062a04f73f57105a81685
CRs-Fixed: 2666696
Made the default value to advertise trigger frame padding
duration as 16 us so as to honor HE MAC capabilities sent by FW
Change-Id: I1bf75965f1b9b46d61c94997273621a6e9de46c1
CRs-Fixed: 2667623
Currently these params are sent to fw from hdd. By design, this
should be done by fwol component. Add fwol APIs to achieve this.
Change-Id: Ifcc67fe15e76a32c28819267b0639edae1032093
CRs-Fixed: 2665749
CLD driver should always use HIF runtime PM wrapper APIs so that
the stats can be recorded properly.
Change-Id: I0cd9ac363c3d2dacd326d53e3f5d09887e7f3ed0
CRs-fixed: 2666953
Enable the increased tx descriptors flag for qca6390.
Based on 1Tx:8Rx NAN test case experiment, it requires
increase in Tx descriptors to burst trafficto each Rx device.
Change-Id: I7978732fda7149bf4c6ffaf4ea29f4e5dd30fd95
CRs-Fixed: 2665503
Add flag for increased Tx descs. And Enable the flag for qca6490.
Based on 1Tx:8Rx NAN test case experiment, it requires increase in
Tx descriptors to burst trafficto each Rx device.
Change-Id: I364ada1ee80afcaf3db3d50efa16a95054a4f7f4
CRs-Fixed: 2658549
With Change-Id: I02f207cdde9d8fb68cd91fab07572baa9e7ac50d,
Ini roam_trigger_bitmap is only initialized when LFR3 enabled.
In LFR2 case, without disconnect, roam_trigger_bitmap is set as
0, vdev roame state is stuck in ROAM_DEINIT for 0 bitmap, can't
switch to ROAM_INIT and ROAM_RSO_STARTED any more, can't enable
roam scan offload in F/W, so no roam scan and better AP event
is reported to host from F/W even RSSI low or beacon miss
happens.
change-Id: I95cb6c892a67816cf47c8dada9b542ae6aefe7f3
CRs-Fixed: 2662880
Wlan driver is built to support different chipset, while on QC platform
function driver and device probe happened in CNSS platform driver,
so when loading wlan driver, need parse supported id list to platform
driver to check if this wlan driver can be loaded in current platform.
Change-Id: I91e87ffa32d77e2bab15fca09514cdefb1075c71
CRs-Fixed: 2644233
Wlan firmware updates "max tx pwr allowed" to host in vdev start response
event and roam sync indication event. Host uses this value to update
power constraint ie in assoc request and TPC query response.
Host updates "max tx pwr allowed" value to firmware after association
completion, so that firmware uses the same max power to transmit mgmt and
data frames.
Change-Id: Ifd8d47fd830bd02bdde2633c22ea82820adf73a0
CRs-Fixed: 2652690
Replacing all occurences of mac_context->lteCoexAntShare
with mac_context->mlme_cfg->gen.as_enabled
Change-Id: I8c86d1d082446e9dc63fc35d478b2e59768dae95
CRs-Fixed: 2665255
CERT test case VHT-4.2.16h will check VHT Transmit Power Envelope IE
in both beacon and probe response frames, we only have it in beacon
frame.
Change-Id: Ie2447fa7affdf8211a46877e0d8b0e41796f0cc3 removed TPE IE
from add IEs and add TPE IE to beacon template, so need add EID=195
to probe response template for target and lim sending probe response
frame for host.
Change-Id: I649f722db552223d2daf912980db0652b9120f63
CRs-Fixed: 2661422
New pld uevent is added for the hang data. Move to the new uevent
and send the data to userspace upon the reception.
Change-Id: I24360c4171f4b26dc2bce719f06317ecc0316738
CRs-Fixed: 2665593
In function hdd_dis_connect_handler, before calling ucfg_ipa_wlan_evt,
the driver validates the mac address being passed. Currently this
validation is not done properly and valid mac address are marked as
invalid.
Replace the incorrect validation API with the correct one.
Change-Id: Ia6bee986089bc0f0defe94ede1d093210bc47034
CRs-Fixed: 2664190
