Add bus related info in hif layer in order to get bus status
when hang issue happened.
Change-Id: If922e0892e0f65de778b9696bbc56fc63c25c169
CRs-Fixed: 2801350
In case of monitor mode, if MPDU restitch fails,
Free all rxdma buffers from head msdu to tail msdu
Change-Id: I852b6095638578a48c07a6fb5d221ead40c5ffde
CRs-Fixed: 2657983
Move disconnect wait logic from osif to connection mgr, so that
MLO/IF manager can use the wait logic for disconnect
during vdev delete.
Change-Id: Ied2bbcfd6a532209f8008499424f94acc41efc0e
CRs-Fixed: 2800990
If a connect req fails before serialization, with a disconnect req
Already queued. Indicating the failed connect req and moving
the SM to INIT state will lead to a invalid disconnected state
Even when, disconnect is in progress.
Thus in this case wait for disconnect to complete before indicating
connect failure and moving SM to INIT state.
Change-Id: Ib25ed43276410cd3e1bb717f64742d691bb17568
CRs-Fixed: 2802137
In FT roam when STA connects to AP1 then PMK1 gets cached. And
then STA disconnects from AP1 and connects to AP2 then PMK2
gets cached. Now if STA roams to AP1 then FW uses PMK2 from mlme
session to create the PMKID. But the corresponding RSO command
from driver sends the PMK1 to FW and the same gets updated in
mlme session of FW. This results in failure of next roams, as the
invalid PMKID gets created using PMK1.
This fix helps in deleting the old/stale PMK cache entries for
the same mobility domain as of the newly added entry.
Also the FT-SuiteB AKM is enabled in crypto using this change.
Change-Id: Id147ec40b8e0deacc4c427d396ec973cec483904
CRs-Fixed: 2796105
Always enable DCS firmware wmi_dcs_interference_event_id event
indication as CCA feature requires, for below scenario, will
ignore dcs event data and won't do interference detection
algorithm calculation:
a: Current SAP channel isn't on 5G band
b: In the process of ACS
c: In the process of dcs disabling dcs_restart_delay time duration
Change-Id: Ic3d0e5c7ffd7ffc2009e2d86480ea9a6c95b59b3
CRs-Fixed: 2804273
For REO error 7 OOR frame, if they are retry frame under BA
session, then they are likely SN duplicated frame. if deliver
EAPOL to stack in this case, sometimes it will fail to connect
AP as duplicated TX EAP response is seen.
Drop duplicated EAP frames in this case.
Change-Id: Iec0ba37548f2a83fe749f83ec904ec9bfdb306af
CRs-Fixed: 2796226
At present more than hundred places to get/put reference
with WLAN_OSIF_ID dbg ID. To help debug reference count
issue, split OS_IF to more sub ids based on functionality.
It will help narrow down to small area if ref count leak
issue happens.
Change-Id: Icca465cbe91a55b4abe0d74bb3de131615bbc6bb
CRs-Fixed: 2802974
Currently, NDP app info length is not being validated with max NDP
app info length. This may result in buffer oveflow wile accessing
NDP app info received from the firmware.
To address this, validate NDP app info length before accessing NDP
app info
Change-Id: Ifddf1afca7ecf2585e8eb450864d9ba127238f6e
CRs-Fixed: 2795961
Assertion when detecting rx desc nbuf sanity check failure to get more
info in the RX refill buffer ring for default version.
Change-Id: I8d0255e2f13e2b993f5651b788f895ea06187bf9
CRs-Fixed: 2800602
wlan Tx completions doorbell is rung after IPA pipes are disabled
To fix this, Check if tx completions are pending before disable IPA
pipes.
Change-Id: I1903e593cd6a546a277979073f0a9ba62b681644
CRs-Fixed: 2796989
currently connection manager is using incorrect api to
get the country info which gives compilation error for WIN.
Use correct api to get the country to avoid any compilation
issue.
Change-Id: I647b171ad2ee4a2b70f6803869435074643aa677
CRs-Fixed: 2801991
The connection process fails for several reasons and the status codes
defined in IEEE802.11 specification doesn't cover the locally generated
reason codes. Add an attribute to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor sub command which can be used by driver/firmware to report various
additional reason codes for connection failures.
Change-Id: Ibab4696fba34f7a18fb8b5f8601e90c5dfcba89e
CRs-Fixed: 2799153
Change logic to identify self peer from pointer
comparison to mac comparison, as there is a chance
self peer can be null and peer free notification
will be issued to self peer.
CRs-Fixed: 2790058
Change-Id: Id0615bbfbe871a47477db7474027216619ca34f0
fft bin size adjust parameter is no longer applicable for
QCN9100. Remove QCN9100 in the check for setting this paramenter.
Change-Id: Ibff3d2d618e20563add79e65e31a442d8d36ba61
CRs-Fixed: 2804120
For a 16-MB profile, while insmoding "umac.ko" unknown symbol error for
function "dfs_translate_radar_params_for_agile_chan" is seen.
The actual definition of function
"dfs_translate_radar_params_for_agile_chan" is present in the
dfs_zero_cac.c which is not compiled for a 16-MB profile. Therefore,
the unknown symbol error is seen.
Add ADFS compile-time macros
QCA_SUPPORT_AGILE_DFS and QCA_SUPPORT_ADFS_RCAC to the declaration of the
ADFS specific function dfs_translate_radar_params_for_agile_chan().
As the macros are not present in 16-MB profile, the function becomes an
empty function in the zero_cac.h and definition of
dfs_translate_radar_params_for_agile_chan() is present (though empty)
in the umac.ko.
Change-Id: I2e28090ef99a76dad9f814f739c207f5bf0f2320
CRs-Fixed: 2802734
In dp_mon_status_srng_drop_for_mac, the rx_desc pool
used for status ring is dest ring desc pool which is
not the appropriate one.
Fix is to use the appropriate desc pool for mon status
ring.
Change-Id: I6f178354789212b375a7a541366bef590a925568
CRs-Fixed: 2800658
Currently host does not convert all internal auth types
to qca auth types which results in invalid auth type
indication for big data logging even for some of the
valid auth types.
For example in current scenario connection hapens in SAE
auth type but driver indicates invalid AKM type.
To address above issue add missing auth type and send
proper auth type to user space as part of the big data
logging.
Change-Id: I2612a081385c2bc888afb032cf6fd2a44d886e40
CRs-Fixed: 2803348
Add host data structure and api declarations
corresponding to peer response event and register
WMI_PEER_CREATE_CONF_EVENTID in global wmi event_ids.
Change-Id: I143a4a85d079cc113397348512b0d86f500cae5b
CRs-Fixed: 2797197
Thermal throttling(TT) defines are added in new TT specific header files
Add this path in include path of dependent build files.
Change-Id: I4590d9a782071dd5975246274cf7e7489544efc9
CRs-Fixed: 2800393
Unlink BSS on connect timeouts like AUTH/JOIN/ASSOC timeout and
in case of no candidate found. This is to avoid reconnect without
a scan.
Also remove entry if diconnect from peer or south bound disconnect
due to heartbeat failure, sta kickout etc.
Change-Id: Ie78c7e764e8c009a5d19ed5dda9c6b9bbf75196f
CRs-Fixed: 2798188
While performing MIC header check for MPDU fragmented packets
host is expecting last fragment will hold full 8bytes of MIC header,
but this is not true in case of MPDU level fragmentation since
MIC header is part of payload it can split across last two fragments.
Fix this logic by extracting MIC header from last two fragments in case
last fragment doesn't have full 8 bytes of MIC header.
Change-Id: I41aaa35d9a18ac0222ab55be6822f9c9d7f15982
CRs-Fixed: 2790661
TSO packet segments are enqueued to the HW individually.
The skb users count is incremented for each additional
segment, so that it is freed only when the TX completion
for the last segment is received.
Currently the skb users is incremented for the additional
TSO segments after the previous segment has been enqueued
to the HW. Due to this, there is a chance for the tx
completion for the first TSO segment to be received even
before the skb users is incremented to account for the
remaining TSO segments, thereby leading to use-after-free
scenarios.
Fix this by incrementing the skb users for additional
TSO segment before enqueueing the previous TSO segment
to the HW.
Change-Id: Idebc28719ba6f0223d5454e15c3cde349803816e
CRs-Fixed: 2801777
Add the reo destination indication value in
the FISA flow table. The reo destination
indication will be saved for every flow.
Change-Id: I58782cc7be7dd686dc9e0f5837e6bbe406cc1514
CRs-Fixed: 2803079
In monitor mode, as part of VDEV delete, monitor mode
poll timer is stopped; it is good to reap the monitor rings
once after timer stop to avoid crashes that arise due to
RXDMA2SW ring backpressure.
Change-Id: Ib15b3398087073ad053616c6aa68e295eaebdd17
CRs-Fixed: 2796608
mcopy mode uses monitor destination ring to sniff mgmt frames,
send enable/disbale full monitor mode by sending HTT msg to FW
when configuring mcopy.
Change-Id: Ie9510bda223861c13054abac640b2c879c4d334d
Initialize osif callbacks to connection manager and add
legacy callbacks to osif and initialize these legacy callbacks
for connection manager.
Change-Id: Ic3e8bd6f55b6cdbbc8cdd5c9c3a6631e8d3bd83e
CRs-Fixed: 2797472
