Implement changes to make the driver compatible with bolero V2.2.
Change-Id: If2797a80f775c685ff2a6912de189b1d9b4906d0
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Update the mbhc reg width from 16bit to 32bit for tambora
target.
Change-Id: Ibf474ffcadce2dfd13202ece1119b9974591acdb
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
The regmap write/read can only support 16bit reg_address. but
the reg_address of tambora is 32bit_address. need add support for
it.
Change-Id: I2374b3672bc4b652ef5ed00921a0e3beed0c6231
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
add support for both fsa and wcd usb AATC.
Change-Id: I0253faad734a433f5da93c34adfc4f9c2e37fa14
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
The modifier - static - request the function to be used within the file.
Remove static modifier to fix the build break.
Change-Id: I46da9dbeb7c3945f8a1bbfa55998e75b5cbdc70b
Signed-off-by: Erin Yan <quic_xinyey@quicinc.com>
Added timing for spf_ready_check api, rightnow
we are waiting for 10sec when apm is not ready
instead updated timing as below
during adsp loading 10sec
during add child devices 5sec
during prm send pkt 0sec
Check for q6 state at the start of gpr_send_pkt.
Change-Id: I94a93842cc0dc7fc9acd7232f413b3c3a9038536
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Updated the wsa dailink to support 384Khz HS playback.
Picked latest codec fixes to kernel6.0.
Change-Id: Ia570dc3f3ed55415ac374e1ba3bb6f2277dade96
Signed-off-by: Sairam Peri<quic_peri@quicinc.com>
Add support for CPU LPR API for pineapple target.
Change-Id: Ic934591b254fcf7af41c4e49396c81ba75530529
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
When codec goes into suspend, disable vdd-px which
will cause an unvote in PM.
Change-Id: Ia9f958d67fc57dbf3932733797bce7b0eb742363
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Enable wcd939x surge reset routine. Add callback for
the event within mbhc and enable it for wcd939x.
Change-Id: Iabc8c3367ae2eca5982db4526c6860e5eba63b76
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Add port type definitions for bt swr master port.
Change-Id: I6cec807fa32064301a6cf7f0f5c5b5c31c76b9b2
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
add support for GND MIC SWAP config for pineapple CDP.
Change-Id: Ia6ecbe2818ac12c7fad5738a78bbdcd4d1611e15
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Remove soc/internal.h, which
is a duplicate of the internal regmap/internal.h.
Change-Id: I05b30b101382e68ced26343ef1278cecfd1b0ed3
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Use DECLARE_FLEX_ARRAY to modularize payload of gpr_pkt struct.
Change-Id: I45f173148c0f36896d52f88b77d3d815a4c321fb
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Audio notify probe is defer and PDR state change is not happening before
the clients calls to audio_notifier_register(). Due to this the
service_data[service][domain].state remains as UNINIT_SERVICE (where service is
PDR domain is ADSP) and due to this audio_notifier_reg_client() return success
without registering to PDR service, which is incorrect. To avoid this, will
defer the client probes when the audio notify probe is incomplete.
Change-Id: Ib96bdb24dd92ea8b81a0201a7b48e917c7b1403c
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
While measuring the adc, if PA is on we will get incorrect values of
adc due to which the detection type is missmatched. So disable the PA
While measuring the adc values and restore back PA once measuring adc
done.
Change-Id: I5833452e23a71637353449bb48b937ee44be24ae
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
select param id vote against sleep when enter to securezone with the help of
mixer ctl from pal.
Change-Id: Icb0d6aba4b13edc0658e676eb89c996d440e9971
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Update digital_cdc_rsc_mgr_hw_vote_enable/disable API with device
info for easy debug. Also, add swrm clock enable checks during SSR.
When SSR happens, swrm->hw_core_clk_en and swrm->aud_core_clk_en will
be reset without resetting audio_vote and core_vote clk. This would
cause clk mismatch in audio driver and adsp and device fails suspending
when there's no audio usecase. Make this change to reset audio_vote
and core_vote clk when receiving SWR_DEVICE_SSR_DOWN.
Change-Id: I9875aac9f6faf8b6481457a70f31b005073369e0
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
For PBR and CPS ports, need the ability to customized slave
SWR frame OFFSET1 settings. Add similar method to WCD TX where
offset1 and lane_ctrl parameters are parsed from WSA device tree
and configured in SWRM.
Change-Id: Ib973ed93d9daa5ba02461a156e5b0a8c816d371e
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add PBR, CPS port types and port parameters for WSA
Update RX and TX port types to include full list of ports
Change-Id: I5b69ee777addebcf4167dccd4ce4ab0af31b754d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Port drivers for Linux kernel 5.15(or after).
Remove unused headers that not present in the new kernel.
Update function interface matching API updates in the kernel.
Change-Id: Ibdffbe20c0b65b2ddda958d6a32c493696e15768
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Send codec register's and its value to enable/disable EAR PA
when codec duty cycling is enabled.
Change-Id: I6ce7183bda3dd2d02829d280d27e5a5573e3efcc
signed-off-by: sarath varma ganapahiraju <ganavarm@codeaurora.org>
Copy new header files for pinctrl and regmap from kernel to avoid
softlink broken on new kernel compilation.
Change-Id: Ic10ff1da488584b14156757ef0159c6a7e87e83a
Signed-off-by: Meng Wang <mengw@codeaurora.org>
During SSR, GPR will receive adsp down notification
first and set to SUBSYS_DOWN mode. Sometimes before
audio_prm received adsp down notification, prm_gpr_send_pkt
is called but it will get stucked in spf_core_is_apm_ready
for 30s and device crash happens. In audio_prm, before
checking if spf is ready, check if both prm and gpr are ready
to avoid getting stucked.
Change-Id: I851c140a07162e4fcf20353002ef0130441ca1db
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Resolve warning log when hph pa mutex lock is destroyed before
unlock. Initialize hph pa locks as global lock and do not destroy
during SSR to resolve issue.
Change-Id: Idc5af793294f7fdc8dbcc17770f68fe2c46ab337
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
