Due to certain write-once registers needing to be set during
bootup, assume that compander on will be the default usecase, unless
haptics SKU is used.
Change-Id: I7903f3a4bf1eae82b4b9302ddc4f1e4c59d2cad3
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update from SOC_ENUM to SOC_SINGLE to match rest of driver
implementation. Also remove remaining dev_mode enum references
in wsa884x driver.
Change-Id: I2a477c4fa8c29373ffa1e8e2eb599a0f1c61653d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add check to validate bat cfg,
bat cfg register read compared to dts read
Change-Id: Ib62ae3b3535a75dbc7c71b2b2ac3752fb2e61156
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Add mod % 2 to allow dev_index to work with WSA2 Macro.
Also fix issues associated with incorrect parameter
checking of dev_index leading to potential array index
out-of-bounds issues.
Change WSA MODE mixer control to be SOC_SINGLE_EXT for
extra parameter validation.
Change-Id: I030ee64d87fa60c6b44feebf5ccb1265f4291cc1
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
replace all dev(pr)_err/info logs
that could potentially flood kernel logs with
ratelimit functions dev_err_ratelimited and
dev_info_ratelimited
Change-Id: I32dc6002dead1a07622978c4de63d541c01982fd
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
idle detect thr is a fixed value, do not need to change
Add debug statements in idle detect control func
Change-Id: I68a049f8560a1a444c019df2dc09f7cf62b37d46
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
the offset between LPASS_CDC_WSA_RX_INP_MUX_RX_INT0_CFG1 and
LPASS_CDC_WSA_RX_INP_MUX_RX_INT1_CFG1 is 8 so updating
0x104 + 8* interp
update ng block register write for NG2 mode in Kundu
Change-Id: I44da894feebb5d25bd467ffd4d54adde111778e6
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Update equation that converts from the PBR table to
the correct register value.
Improve accuracy of truncation by moving the division
into one operation at the end of the formula and adding 1.
Update a few table values that were copied incorrectly.
Change-Id: I685c02778468e910820a90e2de216e0daf2491ac
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Use LEGACY source if any of the below use cases is met:
EAR, PBR OFF, IDLE, NG2 and PA GAIN <= 13.5dB
Use PRE-LA when: All other cases
Change-Id: Iace0c1f6fea367a73cd604b958bd5c8905d29509
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Cast returned u16 value to int in VA/TX macro: clk_div_get
to avoid possible data type warnings seen in function
caller.
Change-Id: I08943a26294ce54a207b739867292c01d090623e
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Interrupt from wsa883x are not handled as slave_irq is not set.
Add slave_irq for wsa883x to address this issue.
(cherry-picked from commit ddfc43e7c48dcbe9bbae45b5caacdd5bca441800)
Change-Id: I6b56aa88cca895e4e0e5871a7478f6859d45b03f
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
regmap_irq_chip->irq_drv_data is shared by all attached wsa
devices and point to last probbed wsa device. This will cause
interrupt handle issue. Update irq_drv_data per wsa deviece to
resolve this issue.
(cherry-picked from commit 1852682fbcebfb9f479c3d09a91c075049b90253)
Change-Id: I6ac0520a4074d74dfb28122e06eed6a86374c0ce
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
PA_ERR can happen during speaker path setup. Log the
error status in the interrupt handler and clear the error
status for next audio playback to resume properly on
the speaker.
Change-Id: I0490d4cdd6379ed779ce7f54ec8b56d5a7af0649
Signed-off-by: Phani Kumar Uppalapati<quic_phaniu@quicinc.com>
Update to 5.15 kernel dapm api.
Pin name no longer needs prefix as it is added in API.
Change-Id: Ibf967dd01a36decdf904eff9d5af2e315aa53f1c
Signed-off-by: Kunlei Zhang <quic_kunleiz@quicinc.com>
Only UVLO_irq, PA_ON_ERR_IRQ and PDM_WD_IRQ are enabled
on wsa883x. Enable all other IRQs to monitor if WSA is in
bad state.
Change-Id: Ia78f12520eda4b26c00776583a78b14b74771e0e
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
With current setting for VBAT_ATTN1/2/3, pop is heard when
battery is low. Update default value for these registers
to resolve pop issue.
Change-Id: Ic4002a4b30ecd04b04001ca5f16bac5745a803d7
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Can now set these registers during init once these values are
acquired.
Method called again before playback in case there are
speaker/recv changes.
Change-Id: I1b544633a660e98acadf94b9589b7656edebdd56
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update mode argument type from int to u32 to avoid
any potential data loss since input is also u32 type.
Change-Id: I9541a7da20d2a22a0066622736268adffde5adbf
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Whenever there is an interrupt,
mute the PA, then wait 1ms and unmute the pa and
check for another interrupt. Then if there are still interrupts,
retry muting and unmuting the pa with delay.
If interrupts persist, the PA will remain muted until there is a
usecase teardown or reset.
Change-Id: Ic59fc33d4606c1c630a61796d513a9ec99a4979c
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update to latest sequence from WSA hardware systems team.
Add writes for VADC, BG, Boost
Change-Id: Ic61e1c36154ff673fce05546332e89fe683a3075
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add new lpass RX paths. Needed to fix
WSA ADIE Loopback.
Update DAPM enum length to include these RXs.
Change-Id: Ie174cfab20b8beb103eefa94636e76ad756c7345
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add to avoid crashing related to device tree parsing
of SWR port params.
Change-Id: Id839cc908fb5f7843e5fd6260b3205c8844349ba
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Found potential issues relating to uninitialized or out-of-bounds variables
present in codec drivers. Place checks to ensure proper ranges are used.
Change-Id: Ib68cba2413788a57237f1f18fc5ce5fb5c6bfb0a
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
For PBR and CPS ports, need the ability to customized slave
SWR frame OFFSET1 settings. Add similar method to WCD TX where
offset1 and lane_ctrl parameters are parsed from WSA device tree
and configured in SWRM.
Change-Id: Ib973ed93d9daa5ba02461a156e5b0a8c816d371e
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update to 5.15 kernel dapm api.
Pin name no longer needs prefix as it is added in API.
Change-Id: I5c1378839f4c4d2aa70fb11706c5bb65d4eb0952
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update function to correctly read array from device tree.
Previously not reading values and returning -EINVAL.
WSA bat_cfg/rload/sys_gain are now correctly configured.
Also add softclip clock enable during pbr config.
Change-Id: Ia1b93acfde3e799b3b72e05966d0fa955c3f49ac
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Removed PA Mute, COMP Offset, Ext_vdd as they will not be used
in WSA884x.
Change-Id: I58ffd490c9929fa3388678d9ab7114207779191d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add idle detect source select based on NG mode,
if NG2 then source is PRE-LA else LEGACY
Change-Id: I4e0cb3825960e6b795038fb5e85cfaa7a2fbfe62
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Add idle detect enable for mixed control path,
and update copyright markings
Change-Id: Idf2932cd1813082f60ee96010788cdb1ef36afbf
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Add set config function to validate and
set battery stack mode, rload and system gain
Change-Id: I075bf3cde6a9671a8d93f32aec43b941ea86f2ea
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Read noise gate mode from device tree,
set NG2 based on the register read or
set to idle detect mode
Change-Id: Id1e478ad230125d1e35229493cb0fbd6867c6a3b
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Boost current limit is now dependent on PBR and bat_cfg.
Add BOP2 VTH/HST initial settings.
Add OCP LOW VBAT ITH sel settings dependent on bat_cfg.
Change-Id: I235f4b75ee12e5f24d46fa0ebca67547997934e2
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add PBR/CPS ports to debugging by adding logic to
is_swr_slave_reg_readable.
Change-Id: I9ef09ed90ccce2c696eaec7b1eed9c47a7e73f58
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Lpass-side enablement of new WSA feature.
Configure PBR registers based on WSA bat_cfg/rload/sys_gain.
Some registers updated during init, others during enable_interpolator.
Change-Id: Iac42672182827a9da47700319c61b9d0a17d0936
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
