Add new files in Wifi-Pos module to support PASN authentication.
Introduce new API to handle 11az ranging peer create, to handle
PASN peer create response and manage the PASN peers to initiate
external authentication to userspace.
Change-Id: I0b638d3cfca2753074fdb56ad78373f842ca80ee
CRs-Fixed: 3150241
Add new public structure file for Wifi_Pos module to define
11az related structures & enums, vdev private object for
Wifi Pos module.
Change-Id: Ia8b8ebb3b36cc8f1d9598629e63d15a0f16301c7
CRs-Fixed: 3150228
Fix for crash seen during MLO NAWDS peer creation.
Peer assoc for MLO NAWDS peer is done in a different way
hence avoid peer assoc in wlan_mlo_peer_create.
CRs-Fixed: 3179437
Change-Id: I76356e68ef267fe2b4d37bfe29faca5ed8c02347
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
This change is to vendor attribute for peer TID flush vendor
cmd QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING.
Change-Id: If112ec288a64622b9bf7fe625f7ac9e127d0ecbe
CRs-Fixed: 3170381
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
For KIWI, FISA FSE table is moved from host DDR to CMEM,
then for each time flow learning, it request to force UMAC wake
up then update FSE info in CMEM. currently hif_force_wake_request
will print PCIE_SCRATCH_0_SOC_PCIE_REG register value always,
so when flow learning happened frequently, it might lead to excessive
logging.
Remove the print for successful case, only print register value if
wake up failed.
Change-Id: I87f3b1c8f4ac0fa6270410cf8564b55446b3a40f
CRs-Fixed: 3180175
While pushing WMI cmds for TWT enable/disable, use separate
CE instance for each pdev.
Change-Id: I63e77996f9face7e319fbd8abf580d13ce1c05a1
CRs-Fixed: 3162042
Currently, data stall detection is without control over
individual data stall events.
INI variable, gEnableDataStallDetection is converted from
boolean to unsigned int which provides control over events
across FW and host with each bit corresponding to different
data stall events.
Bit 0: Enable all data stall events if set.
Bit 1-30: mapped to data stall events. Used when Bit 0 is 0
Bit 31: Enable aggressive timeout for WLM Mode.
Change-Id: I4656520accd1589e77d5054eaa0a3cb8e63b14b2
CRs-Fixed: 3174906
Modify Kiwi CE host, target, and target_to_service config
to support LPASS datapath service.
Change-Id: Ib4cf47e924b0380bf25828b60ad329f7d8a2789f
CRs-Fixed: 3180744
Introduce new QDF API's to handle skb and net dev handling in
os abstract code.
Change-Id: If5a460df2c6c1b4068909fed6e5b3036623c2093
CRs-Fixed: 3164916
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I5060795918571763ad467aae93729040fbca96a1
CRs-Fixed: 3147897
packmode_fftbin_size_adj is used when the reported FFT bin length from
HW is twice the actual size. This issue is fixed in HW from Pine onwards.
So, don't use this WAR on QCA9574.
Change-Id: I43a4bcb6f238fac6a14c1f6459d7ad24a7a99b2d
CRs-Fixed: 3165085
Implement qdf support for netdev stats, so that
qdf macros will be used to handle netdev stats.
Change-Id: I7018fd81de8410080be03b3156ddcc941d1d180f
CRs-Fixed: 3165357
To calculate average delay for hist-stats, use the below
formula : new-avg = (current-avg + new-delay) / 2.
During accumulation of delay-stats for all the TID's for
a peer, only the hist-buckets with non-zero counts should
be considered for calculating the various delay levels.
Change-Id: Ic930116bd650baab6a2b43e077cf55f5c79681d5
CRs-Fixed: 3178032
In the case of ME6, Backhaul WDS, NAWDS
1. Send the igmp pkt on the same link where it received,
as these features will use peer based FW metadata.
2. Bypass the reinjection.
Change-Id: Idf0058e182257fbcedd8eb5fc8bcde945e8a91bc
CRs-Fixed: 3171558
When TX completion is released from FW, dp_tx_notify_completion()
will not be invoked, then TX DCHP ACK will miss
hdd_softap_notify_tx_compl_cbk() which then
WMI_PEER_CRIT_PROTO_HINT_ENABLED with value 0 will not send to FW.
(1) move dp_tx_notify_completion() from dp_tx_comp_process_desc_list()
to dp_tx_comp_process_tx_status(), so that both TX completion release
source FW or TQM case will call it.
(2) clear TX notify flag for intra-bss forwarding BC/MC to avoid
unnecessary TX completion notify.
(3) Set ts.status for release source FW case otherwise it will be value
0 always.
Change-Id: I2bf9900a3d16ba162a83b061f0b96e7d2f79423a
CRs-Fixed: 3178423
As dynamic allocation occupy cnss prealloc memory, which may
cause this prealloc pool to be exhausted.
Move dynamic memory to static.
Change-Id: Ia3500868cbcdbd9676f72a3588462ab0d6a21088
CRs-Fixed: 3171015
Assume AP1 and AP2 are SPMK APs. For SPMK AP(s), Host
should add an entry of an AP in PMK cache table like below in
two cases only:
Case 1. When DUT successfully associated with SPMK supported AP
In this case host update “is_spmk_ap” flag in PMK
table by parsing beacon of associated AP after
successful connection.
Case 2. When DUT successfully roamed to SPMK supported AP
In this case host update “is_spmk_ap” flag in PMK
table by parsing roam sync indication event.
In case of connection with SPMK AP, Host selectively deletes PMK
entry for other SPMK supported AP(s) on basis of “is_spmk_ap”
flag and maintains only one entry for all SPMK AP(s). And host
sends the same single PMK in RSO for further roaming to SPMK AP.
Initially, DUT is connected with AP2. Then Disconnection happens with
AP2 due to NUD failure. After disconnection, the upper layer sends
flush PMK requests for AP1 and AP2. Host deletes old PMK entries for
both APs. Now upper layer sends a set PMK request for AP2. Host adds
AP2 entry in PMK cache table but host does not set "is_spmk_ap" flag
in PMK table for this entry as DUT is not connected to AP2. Now host
receives a connect request for AP1 from the upper layer. DUT
successfully associated with AP1 by performing full SAE authentication.
Host adds an entry for AP1 in the PMK cache table and sets "is_spmk_ap"
flag for AP1 but fails to delete the entry for other SPMK AP(s), here
AP2, from PMK cache table. This is because of "is_spmk_ap" flag is not
set for AP2. At this point of time below is the PMK cache table entry
for SPMK AP(s): The Host PMK cache table has two entries for two SPMK
APs.
BSSID PMK is_spmk_ap flag
AP2 PMK2 0
AP1 PMK1 1
Now FW roams to AP2 using PMK1. Host process roam sync indication for
AP2 and updates "is_spmk_ap" flag for AP2 in the PMK cache table. As
Host has a stale entry for AP2 in the PMK cache table, Host sends AP2’s
PMK (here PMK2) in RSO command which firmware will use for further
roaming but roaming fails due to invalid PMK, as target SPMK AP expects
PMK1 in reassociation request.
To handle these scenarios, FW should send PMK info of roamed AP and
host override stale entry for roamed AP (if any) with roamed AP's PMK
in PMK cache table.
Change-Id: I3c6a49be065e4744e438c2762c103eb3095a2253
CRs-Fixed: 3168078
When RRI over DDR feature is not enabled,
the variable rri_over_ddr_cfg_valid goes uninitialzed.
This can lead to unpredictable behaviour.
Fix this by initializing pld_wlan_enable_cfg to zero
before use.
Change-Id: I485dc552201111834375411b9a493ddbf9a7505c
CRs-Fixed: 3176497
Check for mld peer id instead of link peer id in the case of
intra bss forwarding between MLO NAWDS repeaters
Change-Id: I7af7f43e7f88c95b0debee85c0976fdb9a1c5519
CRs-Fixed: 3142943
In order to reconstruct frame for MBSSID feature, per the description of
the Reduced Neighbor Report(RNR) element about MLD parameters subfield
in section 9.4.2.170 of Draft P802.11be_D1.4, the RNR IE is modified:
1\ If the reported AP is affiliated with the same MLD of the reporting AP,
the TBTT information is skipped;
2\ If the reported AP is affiliated with the same MLD of the nontransmitted
BSSID, the TBTT information is copied and the MLD ID is changed to 0.
Change-Id: Ibd4f2af28289bdb2f65c26966a92ea4df530fccb
CRs-Fixed: 3136398
Enable smart moniotr operations to add/delete
NAC clients and to get NAC client rssi value.
Change-Id: Ifc933d474da15101293cf3e1c07261917fb634f9
CRs-Fixed: 3169256
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
For single link MLO connection, there is no partner peer creation,
so wlan_mlo_link_peer_attach is not triggered. wlan_mlo_peer_create
is good enough to trigger mlo_mlme_peer_assoc_resp.
Change-Id: Ia76503e146a07d15d7b263aa36f9e8c4d110fc6e
CRs-Fixed: 3168623
Add a check in qdf_minidump_log() and qdf_mindump_remove() so that
log types that are not allowed for minidump are not added to the minidump
table and also are not requested to be removed when they are not in the
minidump.
Change-Id: Id4cfdc0de1fc9baf40ae89ad5d3b3f9543df2805
CRs-Fixed: 3171812
Monitor 2.0 uses a msdu_queue (75K memory), which
is currently enabled for monitor_1.0 as well.
Add this memory under Monitor_2.0 feature, so that
there is no memory increase for monitor_1.0.
Change-Id: If0f3701787585ec2b2efde018287101919a77570
CRs-Fixed: 3176254
In Beryllium architecture, PPDU_START_USER_INFO TLV carries
the user specific info for each user in a given ppdu.
Add subscription for this TLV by host for enhanced stats use case.
Change-Id: Ia12c5c3ab36198e7cd40dad0c0d92b945d2b49c6
CRs-Fixed: 3166305
