Add htt tx and rx structs from HTT to cdp_pdev_stats.
These Fw tx and rx stats are obtained through HTT events.
athstats application uses cdp_pdev_stats that contains host stats
and fw stats.
Change-Id: Ia063f406bdc6d32a684c4026b8425ecc96faa3db
CRs-Fixed: 2190793
Rx PPDU length is calculated from number of MSDU length in each MPDU
Rx PPDU stats are populated after updating PPDU length.
Change-Id: I2af6a82eaddc4e791d4e7445c933a5886304e8f3
Radar bandwidth detection at certain frquencies is reported to
be lower than the acceptable threshold. This is due to the low
rssi reported in the phyerrors.
Fix the issue by adjusting the rssi threshold accordingly.
Change-Id: Ia1598342e33b1217a1fb163878b2ac42661b33af
CRs-Fixed: 2184681
Add sanity check for wmi TLV header length before padding/shrinking
elements in a wmi which has a variable length for its TLV structure.
Currently, the TLV length is not checked so its maximum value could
be 65535 which results in a hugh count for elements. Number of elements
is used to terminate the loop for padding/shrinking. If the number
was too large, there would be memory overflow.
Change-Id: Iea0615fc511696c6cc5dcc48a9dfff225256a52b
CRs-Fixed: 2181685
Currently including only cdp_txrx_ipa.h header gives compilation
issue as we need to include ol_txrx.h header to remove dependency.
In this remove dependency by including proper common header file
in cdp_txrx_ipa.h
Change-Id: Ia207e990f09d284a6dac97fbae8e1bc61fb6cbe1
CRs-Fixed: 2193987
Add command support to not send ADDBA REQs.
The corresponding WMI VDEV param ID to set the
VDEV param has been added.
Change-Id: Id53f8101a61ccc0aba2a9a6735d1c6942ba3592d
CRs-fixed: 2188560
Under low memory conditions skb allocation sleeps
and results in kernel work queue watchdog.
Increase the wmi timeout to check if the system
recovers to allocate the SKB.
Change-Id: Ie4e42fdc71703c687ba2e5a4d995481ea7931c97
CRs-Fixed: 2158198
Added CE config for 2nd mac support in Napier. This is needed when
2 mac support is enabled in FW to bringup both 2g and 5g radio
Change-Id: Idd0b8fa7617e4797413266a62053125802f6b3ad
CRs-Fixed: 2192227
Vdev detach does not happen till all the peers associated
the vdev are deleted. because of DBDC repeater feature,
we are creating a self peer even for STA VAP and were not
deleteing it properly causing a memory leak. This change
fixes this issue.
Change-Id: I39d271bef5d5adc6e94333a3fbc483bdb7067f27
CRs-Fixed: 2193590
Add support to send the per chain rssi to upper layer
for each beacon and probe responses.
Change-Id: Ife6cb9e8e65591baf485c54a985f84d842400321
CRs-Fixed: 2177638
RX mgmt frame is from interrupt thread, it may be access freed roc
ctx for low rate case. Save vdev id of current roc ctx in p2p psoc
object. Low log level of P2P RX and TX conf since too many output.
Change-Id: I4c944244f32b844d78bb69d66e341a1f3bf13abf
CRs-Fixed: 2180116
In testbed STA mode the RSNE may not match with APUT and thus
driver fails to filter AP from scan cache as PMF capability
mismatch.
With this change driver will ignore PMF capability check and
proceed with connection to send auth and assoc to APUT.
Change-Id: I195cda133c8d2b9d38b1d2966261c320185ffeca
CRs-Fixed: 2195352
Tx completion success counters are not being updated correctly.
Accumulate successful completions in tx_success variable.
Change-Id: I290e581e93e03ad23e349c9df7834174d6d3a787
CRs-Fixed: 2191599
A call into qdf_str_lcopy() is passing qdf_str_len(src) as the
destination buffer size parameter. Instead, pass the actual size
of the destination buffer.
Change-Id: I62ff473d9d45cfa53c5fc3df27743690586381c0
CRs-Fixed: 2196114
AP does not add the RADAR found channels to NOL when user configures
the AP in 11A mode. This is because, dfs_get_bonding_channels()
returns the number of bonding channels as 0 for 11A mode. Hence, the
radar detected channel are not added to NOL.
Add change to get bonding channels for 11A mode.
Change-Id: I88db7f1241c5915021071e9caa1cfb8b7fa94c7f
CRs-Fixed: 2195597
Add support for HW mode info vendor command which sends
mac id, band, interface id and frequency information for
each MAC provided by driver to userspace.
Change-Id: If1112d29b8781cf5ba0480c84feeb772142f2c0e
CRs-Fixed: 2185559
In order to avoid global state, add a context parameter to
qdf_ini_parse. This parameter will get passed back to consumers via
the existing callbacks.
Change-Id: Icd74a58815701b4603924838bb84c7956058da6b
CRs-Fixed: 2194517
On attach , allocation failed and in error handling
path it will call pdev_detach to free the resource,
resolved NULL pointer dereference which was causing
kernel panic.
Change-Id: I0fd5395fc2d4d2040049124094231dfa524a66b7
CRs-Fixed: 2192809
Add support to drop beacon, probe response frames if frame
receipt channel and channel mentioned in IEs dont match.
Change-Id: Ib545f125dc53ccfb21abf6bdcb94a327ecde5a0a
CRs-Fixed: 2149224
Parse WNM action frames like TFS, FMS, TIM, WNM-SLEEP
so that they are not dropped as unspecified frame type.
CRs-Fixed: 2188942
Change-Id: Id3add53eb18b37a394d8387f7d32e9efd34671a9
As part of init FR, osif_pdev object stores pdev object, so same has
to be passed as param.
Change-Id: Ic9c41e5ef54fdb80898f10f27a86970e76d1f24c
CRs-Fixed: 2188451
Set hw mode to DBS or single MAC for STA+STA and STA+P2P
concurrencies based on channel_select_logic_conc ini.
Change-Id: I46ba4d5cd8f5cda71d0c00be2b612bc851eb5ba4
CRs-Fixed: 2189848
Add ini to select DBS or inter-band MCC channel selection logic
for STA+STA and STA+P2P connections.
Change-Id: I7cfde9592ec210b0a8c812171d2bc6f005e17fb2
CRs-Fixed: 2189845
Implement QDF utility functions to operate on ARP data packet to
support ARP debug stats feature.
Change-Id: Idce70799bd3698dc8a8ecd8cfc8ef7d9bf1f5764
CRs-Fixed: 2019789
X86 driver is failed to load due to DMA malloc size
limitations.
Increase the maximum DMA malloc size for X86
driver.
Change-Id: I5d3a0138a61751e924183b7175a0b565cffd4eb4
CRs-Fixed: 2188749
Add change in driver to get RSSI of non associated clients.
This is done in 2 levels of filtering
1. Send WMI to FW to configure BSSID in HW
2. Filter the neighbour BSSID packets received in host for
the configured client mac
Change-Id: I6b684b83cecb308dac326056aa77537aee07b933
CRs-Fixed: 2148773
qdf_bool_parse() fails to advance the parsing cursor after consuming
valid characters. Advance the cursor after valid input in
qdf_bool_parse() to avoid failing to parse valid boolean expressions.
Change-Id: I904d5eed638e215e9821e140feb5286fffe37b7b
CRs-Fixed: 2194546
strcmp() is regularly used to compare two strings for equality. However,
reading source code using strcmp in this manner can be prone to errors
because the return values are not obvious from the function's name. In
the best case, this leads to referring to the strcmp documentation more
often than one would like. In the worst case, this leads to difficult to
spot bugs. Add a thin wrapper for this use case to make intentions
abundantly clear to future readers. This wrapper is effectively sugar
for 'strcmp(left, right) == 0'.
For example:
if (!strcmp(left, right))
/* reads: if not string compare: left, right */
Becomes:
if (qdf_str_eq(left, right))
/* reads: if string equal: left, right */
Change-Id: Iabcb7c7e9f37dcb6cf1bdf5d7cc6c69ea926ba5c
CRs-Fixed: 2194508
QDF_MODULE_ID_CONFIG was previously defined for use by the configuration
component, but qdf_trace was not updated. Set the default logging level
for the configuration module in qdf_trace.
Change-Id: I8946b5473f03f3b85f8c2d6783039e03c9a49494
CRs-Fixed: 2194542
A very common pattern in the Wlan driver is to test for a fatal
condition, and then call QDF_BUG with some falsy value. Add a sugar
API for these cases, which effectively does 'QDF_BUG(false)'.
Additionally, include 'debug' in the name to remind consumers that
the panic will not occur on end user devices.
Current syntax:
if (fatal_condition)
QDF_BUG(false);
New syntax:
if (fatal_condition)
QDF_DEBUG_PANIC();
Change-Id: Ifa03e9109be5efdbd061ca32363d5719fb91da0f
CRs-Fixed: 2191582
scan entry raw data length is not populated
during the duplicate scan entry generation.
Copy raw data length to new scan entry
while duplicating the scan entry. This api
is triggered as part of the get scan results
handler.
Change-Id: Ie59782fd437415552b7ae29c1b190e86d4b72d48
CRs-Fixed: 2186845
1. After mem_free() is done for a vdev without peers,
set it to NULL so that later check can catch it.If not,
it could be used to increment stats.
2. After a bss peer is freed, mark it as NULL so that
it is not used again to update stats.
Change-Id: I82e73c29c1409aac1af735ab849e8b07d387acf2
TDLS RX management callback needs to be registered
only during driver load time.
Remove the redundant callback registration.
Change-Id: Iee0e781ade2a4dafaaf372e8a9078347493418df
CRs-Fixed: 2185908
The maximum BW for edge channels may fall outside the low limit or
high limit of channel range for a given pdev. But reduce the maximum
BW only if it is less than or equal to 20 MHz. Higher bandwidths are
realized using channel bonding and the channel itself may not be center
channel.
Change-Id: Ifc6bbadf91759fedaf432d162763577ea56bb7b7
CRs-Fixed: 2184724
Set the timer_inited flag to false bit earlier to
stop ce_poll_timeout function from processing
CRs-Fixed: 2182979
Change-Id: I91dd257c6beb21e379a4c51e651d835a35ca76ed
Add QCA vendor command and attributes for vendor specific command to
set MSDU queue depth threshold in target per peer per tid. This command
contains mac addrees, tid, update mask and threshold value.
Change-Id: Ie119ff5aa333bcffcec0850464982dec59fb6a07
CRs-Fixed: 2162455
