When monitor KO not loaded Return QDF_STATUS_E_FAILURE
from dp_monitor_tx_add_to_comp_queue() so that caller
will free the buffer
Change-Id: Idebcf81121767ccd93d95308433241fcf0a93c93
In ifconfig athX stats, tx packets and bytes were getting double
incremented in NSS offload disabled case. It was due to tx.comp_pkt
stats getting updated both in per packet Tx completion path and in
Tx per ppdu indication from HTT path.
Fix by updating stats only in the Tx. completion path.
Change-Id: Id75d914874480a4e24ccb13223818b67869eb378
If ppdu rssi unit is dbm, need convert to db for API:
qdf_nbuf_update_radiotap, only need convert once for first mdpu in the
ppdu. if convert for each mpdu, wrong rssi will be saved.
Change-Id: I85e92121ddb289e3513022ff092083825197efb4
CRs-Fixed: 3057041
Add stop timer flag to avoid resubmission of tx capture work queue timer
while del_tiimer_sync.
CRs-Fixed: 3056656
Change-Id: I72bfb6916f02297b15bb733359c0e4d7f91f0b73
- Add support htt msg for HTT_H2T_MSG_TYPE_TX_RING_SELECTION_CFG
msg configuration
- Add support for configurable length dma
per packet type for rx monitor.
- Add support for wordmask subscription for rx monitor.
- Add support for per packet msdu/mpdu logging config.
- Add support for tx monitor tlv subscription.
- Dummy APIs for 2.0 filter configuration
Change-Id: I36b18c03eff452537c2f051b24275b81ab98ebae
CRs-Fixed: 2991330
Add APIs to allocate, free, init and deinit
sw descriptor pool for rx and tx monitor.
Change-Id: I03287cf3c590ace91825f16a7b0c5752c04fc8ed
CRs-Fixed: 3010468
- Change to allocate BE specific monitor soc
- Allocate, initialize soc and pdev level monitor rings
- HTT srng setup for source ring
- Dummy APIs to allocate, initialize sw desc pool
Change-Id: Icf90994e7bd76017cf3c83ae00449d839967321d
CRs-Fixed: 2991298
- New data structures are added for BE monitor support
- dp_mon_soc_be - to maintain soc level BE specific fields
- dp_mon_pdev_be - to maintain pdev BE specific fields
- dp_mon_desc_pool - to maintain descriptor pool
- Monitor ops are updated for 2.0 and corresponding dummy APIs
are added.
- dp_mon_filter_srng_type is enhanced for TxMON
Change-Id: I12a2fbc53e4eecc7a191b7aa925431298d0a9f54
CRs-Fixed: 2991276
- Features common to both Li and BE and
their APIs are retained files at dp/wifi3.0/monitor.
- New monitor ops are introduced if there
is a requirement for divergence of API.
- Diverged API definitions for 1.0 are captured
in this change.
All of code in below files are moved to 1.0
- dp_rx_mon_dest.c -> 1.0/dp_rx_mon_dest_1.0.c
- dp_rx_mon_status -> 1.0/dp_rx_mon_status_1.0.c
Only Li and HMT specific are moved for below file
- dp_mon_filter.c -> 1.0/dp_mon_filter_1.0.c
- dp_mon.c -> 1.0/dp_mon_1.0.c
Change-Id: I44d163b27565b86068d80e1d97ec11d0b4a081d4
CRs-Fixed: 2991248
- dp/wifi.3.0/monitor/ => directory for monitor specific code
- dp_rx_mon.c: status TLV procesing + packet buffer processing
- dp_rx_mon.h: Rx monitor header file common for Li and Be
- dp_mon_filter.c: Monitor filter configuration
- dp_mon_filter.h: Monitor filter header file common for Li and BE
- 1.0/ => directory for Lithium specific handling
- dp_rx_mon_1.0.h: Rx Monitor specific header file
- dp_rx_mon_dest_1.0.c: Packet buffer processing
- dp_rx_mon_status_1.0.c: status TLV processing
- dp_mon_filter_1.0.c: Rx Filter configuration
- dp_mon_filter_1.0.h: Rx Filter configuration header
- dp_mon_1_0.h - Li specific monitor ops
- dp_mon_1_0.c - Li monitor ops handling
- 2.0/ => directory for BE specific handling
- dp_rx_mon_2.0.h: Rx Monitor specific header file
- dp_rx_mon_2.0.c: Packet buffer processing
- dp_rx_mon_status_2.0.c: status TLV processing
- dp_tx_mon_2.0.h: Tx Monitor specific header file
- dp_tx_mon_2.0.c: Packet buffer processing
- dp_tx_mon_status_2.0.c: status TLV processing
- dp_mon_filter_2.0.c: Rx and Tx Filter configuration
- dp_mon_filter_2.0.h: Filter configuration specific header
- dp_mon_2.0.h: BE specific monitor ops and defs header file
- dp_mon_2.0.c: BE specific monitor ops handling
Change-Id: I74b5408460b5f2f4b31f73947b55d97dfe3b971e
CRs-Fixed: 2991215
When num_users is 0 and PKT_LOG feature is enabled,
it can cause out of bound access
to avoid this add a sanity check for num_users
Change-Id: I33401d2e6a139f9fc6db145c588e08547afdd2ba
Log level was accidentally bumped up during monitor legoization
change hence reducing log level to info to avoid unnecessary
prints on console.
Change-Id: I338632b98beb2a1f832f9e066109a2ac71a63749
CRs-Fixed: 3039441
Currently mon_intr_id_lmac_map is set only in poll mode
Which is only in Global Monitor mode.
In case of dynamic switch from STA to Monitor Mode
This can cause issue while removing monitor mode
Initialize mon_intr_id_lmac_map in interrupt mode also
and add sanity check for mon_intr_id_lmac_map value in
monitor ring flush.
Change-Id: Ic7dae948078661e376541b30aa70e4e12ca9d24f
CRs-Fixed: 3037952
Currently there is an attempt to allocate monitor
peer even when the feature is disabled, thereby leading
to an attempt to allocate 0 bytes. the failure in this
allocation propagates back and prints an error message
which can be misleading.
Disable monitor peer attach when the below feature is disabled.
- WLAN_TX_PKT_CAPTURE_ENH
- FEATURE_PERPKT_INFO
Change-Id: Ifc6ba1421da0f569971fafa530bbcd3dbaa16b87
CRs-Fixed: 3036720
"Invalid peer id" prints are flooding the AP console
Adding log level as fatal to avoid these prints.
Change-Id: I773476542018389035996e45ea2f7c4cf296e9fd
Release vdev reference in error cases while
collecting scan radio special vap stats
Change-Id: I030105f62fa8bb67c34c49950012f0e1dbf613a0
CRs-Fixed: 3025050
Firmware sends some ppdu stats required for packet capture
mode in new ppdu stats tlv HTT_PPDU_STATS_FOR_SMU_TLV.
Add code to parse it if feature is enabled via ini and
send the ppdu stats using wdi event to packet capture
component.
Change-Id: I5567007a91093dd342f37458760b3a61c040b779
CRs-Fixed: 3004476
set mvdev to null only if mvdev is pointing to vdev
for which monitor vdev detach is called.
Change-Id: I5c82db4e8ea192636a8c322c36f55a5574f9dcee
CRs-Fixed: 3015003
Add dedicated monitor flag at SOC level and do not
enable legacy monitor rings for QCN9224
Also add flag to disable rxdma2sw ring for QCN9224.
Change-Id: I399d22d6c3361bb75ebaad4e46b156db5e628d6b
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
Add CDP interface API support for pkt_log_exit,
to cleanup pkt_log_init on failure.
Change-Id: Ib50efaed5997d341d3e76c2e1dbe42856df40191
CRs-Fixed: 3012201
In order to support flow overide feature,
AST table has to be split between RxPCU and DDR.
With this split, RX monitor cannot make use of
ast_index to fetch peer as it is not from DDR.
So make use of sw_peer_id to fetch peer.
This sw_peer_id is derived from RX_MPDU_STAT_START_TLV
Change-Id: Ib2a003a2640fded3287c318d2ad59fd3127af9b6
CRs-fixed: 3004363
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
PATCH[5/7]:
This patch consists following changes:
-Monitor vdev context allocation while vdev attach and free
while vdev delete
-Monitor peer context allocation while peer create and free while
peer delete
-Move monitor vdev timer function to monitor file
-Move monitor reap timer handler function to monitor file
-Move monitor timer related variables to monitor file
-Add timer init/deinit and start/stop in monitor file.
Change-Id: I9c7910671d3678c53ca9ec44a57bc10e892008d9
CRs-Fixed: 2983994
PATCH[3/7]:
This patch consists following changes:
-Move struct cdp_mon_ops to dp monitor file
-Add new function for dp monitor soc cfg initialization
-Move full monitor mode function to dp monitor file
-Move vdev set monitor mode function to dp monitor file
-Move config debug sniffer function to dp monitor file
-Move set advance monitor filter function to dp monitor file
-Set monitor delayed replenish entries for target types
Change-Id: If8dac4eedc0c8eb4e956df34c7c3adae8712c840
CRs-Fixed: 2983939
PATCH[1/7]:
This patch consists following changes:
-Add new directory for monitor.
-Move monitor related files to monitor directory.
Change-Id: I260cd6853d72f664324c2631a1d1bb7e67eb0bce
CRs-Fixed: 2983782
