In WBM error processing read peer_id from peer_meta_data
instead of sw_peer_id.
This changes is needed because we need to process Rx packet
on ML peer. But in MLO case sw_peer_id field contains
link_peer_id where as peer_meta_data has ml_peer_id.
Change-Id: I3f469adfdf7efa88cb081e94fa9fe0c54c1fb078
When monitor KO not loaded Return QDF_STATUS_E_FAILURE
from dp_monitor_tx_add_to_comp_queue() so that caller
will free the buffer
Change-Id: Idebcf81121767ccd93d95308433241fcf0a93c93
Currently, we are Flushing fragments for peer as part of rx defrag
clean up. There is the possibility that frag flush is called while
we are accessing frags in rx defrag store fragment path in parallel.
Which will cause access after the free issue.
Extending lock in rx defrag store fragment path to avoid any
parallel flush while accessing the frags.
Change-Id: I1e897b195f61d80ea6738e9a93f7bcaaa04adc97
CRs-Fixed: 3065414
There is a race condition as tid_lock is unlocked early in
dp_rx_defrag_store_fragment and descriptors are replenished
from dp_peer_flush_frags and same descriptor is again
being replenished in fragmented path.
To resolve this, extending lock period till all the operations
on tid.head_frag_desc are done.
Change-Id: I6d2abb2119e3bebf739de9e41334d58ba87ee391
CRs-Fixed: 3068165
Modify MLO disconnect handling to issue disconnect on all links in
parallel
Also modify connect resp to accommodate ml info in connect resp
Change-Id: I57575c6ce7c8ebff7770f862dc81e7dfd20aa42d
The maximum WBM2SW rings in whunt for HSP is 5 and
the same could be 4 in wlan code which will result
in wcov failure for HSP. Use a maximum of 5 WBM2SW
rings for HSP based on FW_SIM config flag to address
this failure.
Change-Id: I8340cd094eb1e0cf842894e5c89174d410729028
CRs-Fixed: 3071662
Add new reason code REASON_HOST_TRIGGERED_SILENT_DEAUTH to silently
deauthenticate the peer STA
Change-Id: Ibb4b81562f6802cadb1a9c9fa1452f0875f02ded
CRs-Fixed: 3070895
Debug frame work to simulate the generation of management
frames by HW, processing of management frames by FW and Host.
This would help in exercising the management Rx reorder
algorithm.
Change-Id: I9ec585b1bb41a5eb5e6226d0151ad23143fdb8f7
CRs-Fixed: 3017577
Avoid tracing data packets at high throughput levels. This helps save
CPU cycles.
CRs-Fixed: 3059712
Change-Id: Ideca04e142a2f4080cd5758fe27f0b526ea4f9ad
Add timestamps for last TX/RX in peer stats. This stat is needed to be
passed on to upper layers on demand.
CRs-Fixed: 3059712
Change-Id: If0d8b7dc3c139e4d1b670bf98f3f574f02ea9715
Add support to invoke HIF runtime PM APIs in TX packet path based on
throughput level. Essentially at high throughputs, where runtime PM is
not expected to provide power gains, invoking the APIs is deterimental to
performance.
Hence invoke runtime_pm APIs based on throughput level.
CRs-Fixed: 3059712
Change-Id: I49d111bffa8a37c68abbdd54911f9ecc22430562
INI config to set the number of tx rings to 1
or 2 does not take effect since the value of
WLAN_CFG_NUM_TCL_DATA_RINGS_MIN is 3.
Fix is to set WLAN_CFG_NUM_TCL_DATA_RINGS_MIN to 1
to allow for a lower number of tx rings cfg.
Change-Id: Idc7881f75d42fabda5d3ed55e74c9eb784f7705f
CRs-Fixed: 3070272
Add flag to indicate whether MLO is supported by the candidate or not,
which is helpful when checking concurrency.
Change-Id: I166ad2963163ae4dc7989516b654dce4cb635cec
CRs-Fixed: 3013418
Repurpose the IPA tx and tx completions rings for
normal use when IPA is disabled either via config
flag or ini.
Change-Id: Ia4b6a89c73d888a217bdef40e3c05435c3bb1bb2
CRs-Fixed: 3059730
For T-put test case, if near_full IRQ is fired, ring_near_full
flag will be set and host will always reap reo2sw ring as much
as possible, but if quota 0, this will lead to dead loop
in dp_rx_process_be.
stop reaping reo2sw ring if quota is 0 even ring_near_full is set.
Change-Id: Ifea885162be3ccc6ae0515fc3c2538c459372887
CRs-Fixed: 3067231
INI item enable_dynamic_pcie_gen_speed_switch is no longer needed
and hence deprecate it.
Change-Id: I4d00c761fd21353bdd880a9c93f2faf4fc174264
CRs-Fixed: 3068091
During driver load, print FW CRM sub ID value received in service
ready ext event.
Change-Id: I710508c9c12a476690e0379938c30c916293620f
CRs-Fixed: 3067102
Fill ML partners info in connect response structure of the connect
notification to the supplicant.
Change-Id: I3b972254138d0f00ef63f2b4d336d142e6d5e2ae
CRs-Fixed: 3036325
Add APIs in order to support TR-069 commands to return all the
supported rates for a specific mode based on gi setting, no. of
spatial streams and channel bandwidth.
Change-Id: If6999e59b8c83d0b5a15054bfdaa97465f8992e4
CRs-Fixed: 3066766
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
In ifconfig athX stats, tx packets and bytes were getting double
incremented in NSS offload disabled case. It was due to tx.comp_pkt
stats getting updated both in per packet Tx completion path and in
Tx per ppdu indication from HTT path.
Fix by updating stats only in the Tx. completion path.
Change-Id: Id75d914874480a4e24ccb13223818b67869eb378
Add below changes as part of 37th Reg DB version
a.) Add superdomain FCC1_6G_09 for US AFC Testing
b.) Add sub 6G domain FCC1_6G_09 reg rules for new domain.
c.) Add 6G support for GERMANY, ICELAND, PERU and NORWAY.
d.) Change reg domain pair id for TANZANIA and SOUTH_AFRICA.
Change-Id: I7af2778954c65f85b727453a0a0527e2d4d09089
CRs-Fixed: 3064525
Add below changes as part of 36th Reg DB version
a.) Update FCC1_CLI_LPI_REGULAR_6G to FCC1_CLI_LPI_DEFAULT_6G.
b.) Add sub 6g domains APL3_AP_VLP_6G and APL3_AP_LPI_6G and
reg rules for new domains.
c.) Add superdomain FCC1_6G_07 and APL3_6G_08 for Brazil and UAE
Change-Id: I2d379762f9d5953c47c88e08511fe227ea25ce85
CRs-Fixed: 3057765
Fix MLO compilation issue while exporting the symbol
wlan_mlo_link_peer_delete.
Change-Id: I911917ab7f142fdc49ea99e9613ddb6fb86b5ab3
CRs-Fixed: 3067718
Each FFT bin value is represented as an 8 bit integer
in SAMP message. But depending on the configuration,
the FFT bin value reported by HW might exceed 8 bits.
Clamp the FFT bin value between the min and max value
which can be represented by 8 bits. For linear mode,
min and max FFT bin value which can be represented by
8 bit is 0 and U8_MAX respectively. For dBm mode, min
and max FFT bin value which can be represented by 8 bit
is S8_MIN and S8_MAX respectively.
CRs-Fixed: 3056458
Change-Id: I9ec75f781a130d3ed0d0d9393975fd5874961ce0
In the new wifi specification 11be mode support is added, add a new
11be dot11 mode to qca_wlan_802_11_mode.
Change-Id: I9c5238ffaac96fcdf83e7c342a053dda7fc1f205
CRs-Fixed: 3050936
If vdev is not in disconnected or connected state,
then the event is received due to connect req being flushed.
Hence, ignore this event
Change-Id: If7f51496fcca283cb6559b027a21df82ae9ec7d2
This change aims to fix compilation error caused by implicit
conversion between enumerations when -Werror and
-Wenum-conversion are enabled,
Change-Id: Iaabdbe6203f6740b5d0bedade0773f1d2304aeaf
CRs-Fixed: 3063133
Add fisa deletion support by invalidating the fisa
DDR entry when adding a new entry.
Change-Id: I02189e22e09ca0ef5e1fdb5952c7e72cd87d3673
CRs-Fixed: 2954060
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
Avoid using ast_entry in intra_bss handling, instead use
da_peer_id directly from the msdu_metadata
Change-Id: Ic586f297e8e393504d7d399cff7a67c3035aa11f
Currently reg work is being cancelled in deinit path,
cancel work will remove all the pending work items
and wait for completion of current executing work.
But in reg work case even pending work items has to be
executed because we don't want to skip HP/TP values update.
To avoid this make sure all the pending reg work items are
flushed then disable the work for further queueing.
Change-Id: I2ba1e26cf41fb3b0c33ec584c56525cbfac94d8f
CRs-Fixed: 3065038
sw_exception bit will be marked in reo dest ring descriptor for
FW re-injected frame, get this bit and save it in skb->cb,
this bit value can be used for FISA further check.
there is no reo_dest_indication field in reo dest ring on beryllium,
so share same cb member for sw_exception and reo_dest_indication.
Change-Id: I2321121be7dda68ed19faca177d868c7e8ba1dbf
CRs-Fixed: 3056156
Add the attribute QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY to configure the
priority of vendor scan relative to other scan requests.
Add the valid values that this attribute can take.
Also, add an API to convert NL80211-based scan priority value to internal
scan priority value.
Change-Id: I6c62166c2dd6ea0880b332496b1e4bb0b41840c6
CRs-Fixed: 3044332
Update element ID extension values for EHT Capabilities, EHT
Operation, and Multi-Link IEs. The values are as per current ANA
database.
Change-Id: Iaf8399170340d706acb1ecbd0f8b7050c4f6228d
CRs-Fixed: 3032233
