Extract all the parameter provided as a response from the firmware
for the TSF action command.
This could be used to calculate the difference between the TSF
and TQM clocks
CRs-Fixed: 3136492
Change-Id: I8377bd177f5ea246c9b7939315509ab0b6f2051c
Add WMI ops for SAWF WMI commands
1. Config service class
2. Disable service class
CRs-Fixed: 3118070
Change-Id: Ie21fcfb1f25d2195eee679307e8970ccdda9992f
Export objmgr APIs to be used by SON module to register
and unregister create/destroy handler.
Also add lmac_if API to register lmac_if ops from SON
module.
Change-Id: Id4c19807792b9f7b46387ae907f853151e4e28c6
CRs-Fixed: 3118986
Add HAL APIs to access TX fields to override default flow
classification by hardware.
Change-Id: If2eb0c5a966f87081a7714836c2c4bc0bd47fa86
CRs-Fixed: 3114311
Add a single bit "is_critical" flag to qdf_nbuf_cb structure to indicate
critical frames to DP layer.
Change-Id: I41c67467a3a54eef55c81a80dfb86b3ad7f33518
CRs-Fixed: 3114311
Currently we are not checking whether the packet is a IPV6 packet when
checking for a DHCPv6 packet. This can be error prone if done for a IPV4
packet.
Check for IPv6 before checking for DHCPv6.
Add QDF_NBUF_CB_PACKET_TYPE_DHCPV6 packet type in qdf_nbuf_cb.
Change-Id: Ic24dbaad8bd910c85bb1086317c12ad46466a128
CRs-Fixed: 3114311
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
Currently, the code does not handle an MLO connect when in
non-init state. Add logic to clean up any existing connection
before going ahead with the latest request.
Change-Id: Ia5a10bcc1e0d2c8e82d6ea0d82d1a5bf0604a1e5
CRs-fixed: 3116687
check null pointer for soc return val and
check array index input for out of bound access.
Change-Id: Ib1d52f70128eaf9ba24e9024440490e470fec3d4
CRs-Fixed: 3127451
While notifying the ML connection status to the supplicant, partner vdev
information will be filled in the connect response. This partner vdev info
is populated using partner link IDs. This may cause issues since it is
not guaranteed that link id information in the partner vdev is valid while
notifying the connection status to the supplicant.
To address this, get partner vdev information using vdev ID instead of
link ID.
Change-Id: I5e45b038b1fe5b6ab9c6bbb514eefb0ad4c39e66
CRs-Fixed: 3117702
Currently pn-check logic for OOR frames does not take into account
the security mode. For open mode case, BE hardware does not populate
current and previous pn_numbers. Hence a PN-check comparison may yield
incorrect results.
Check for secure mode, before checking for PN numbers.
Change-Id: I398872d467058bc1ee1d04c811818ea20c5aec7e
CRs-Fixed: 3129986
Add debug prints to display the parameters of
WMI_VDEV_SET_TPC_POWER_CMDID sent to the target.
Change-Id: I4759d04d2b9293d7f5f61c173679f8fb2b7ff941
CRs-Fixed: 3130926
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
Disable monitor mode on sdx65,it will save 5MB buf,
and improve iperf performance.
Dp_rx_buffer_pool_refill is used monitor mode in
MCC, and rxdma1_enalbe=0, we don't need this logic.
But in WIN side, only monitor mode need this logic,
and rxdma1_enable will set true.
Add func dp_monitor_pktlog_reap_pending_frames and
dp_monitor_pktlog_start_reap_timer in dp_internal.h
for compile issue.
Change-Id: I43fee6d7a1836063a7539c3bd4745eef15a4e4b2
CRs-Fixed: 3129542
Ignore peer if it is missing txrx_peer in reinject path while
going through the peer_list. This condition can hit when the
peer_setup call from the control path is not yet received for
the peer.
Change-Id: Ie57d07353f33749a439415d808fc010702c3c884
CRs-Fixed: 3130821
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Operating class field used in RNR IE is of global operating
class. When getting frequency from RNR IE region specific
operating class is used for lookup instead of global.
Added changes to search operating class from global OC
table.
Change-Id: I200ab46187fed91cc66cd954b062c8d8ac44f631
CRs-Fixed: 3131600
Add APIs to defragment a sequence of 802.11 element/subelement
fragments. Add an inline mode to carry out the defragmentation within
the source buffer in order to reduce buffer requirements and to
eliminate memory copies/moves for the lead element/sublement.
Conversely, add a non-inline mode to copy the defragmented payload to
a separate buffer.
Add common helper functionality shared between these APIs.
CRs-Fixed: 3124132
Change-Id: Ia68584e918ddcf626b748f2b0c3a5da6492b40b6
In some MLO functions, there are NULL pointer checks, but the logic
continues even if it is NULL. Return from the function in this case so
there is no potential NULL pointer dereference. This also addresses
a static analysis issue.
Change-Id: I22c4a47d724d8576a2ce78059dec219cbc3de91e
CRs-fixed: 3127461
Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer and wait for a
maximum of 6 seconds for the response. Host can stop the timer and
allow the commands to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is
received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Change-Id: I4577f9b0aac71c0c86bd32b59e69d9527bf107b9
CRs-Fixed: 3106032
This change handles the scenario,if the caller passes invalid
link ix during AID free
Change-Id: I494cb55573ea5d8ecd351aac454d3395710273c1
CRs-Fixed: 3127458
For Quad-band IPQ9574 + 3 QCN9000 RDP, max number of SOCs
needs to be increased to 4 and another IPQ9574 RDP with QCN9224
might mostly have upto 4 PCI devices, hence increase the number
of max SOCs to 5.
Change-Id: Ie8a121c630bc41f084ca772a84503c816ed86514
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Add an API to get the following information for a first 802.11 element
present in the beginning of a given buffer, and a series of elements
after it in the given buffer: a) Whether a contiguous subset of these
elements starting with the first element form an element fragment
sequence. b) If they form an element fragment sequence, then the total
length of this sequence inclusive of headers and payloads of all the
elements in the sequence. c) If they form an element fragment
sequence, then the total size of the payloads of all the elements in
the sequence (not including the element ID extension of the lead
element, if applicable).
Similarly, add an API to get the following information for a first
802.11 subelement present in the beginning of a given buffer, and a
series of subelements after it in the given buffer: a) Whether a
contiguous subset of these subelements starting with the first
subelement form a subelement fragment sequence. b) If they form a
subelement fragment sequence, then the total length of this sequence
inclusive of headers and payloads of all the subelements in the
sequence. c) If they form a subelement fragment sequence, then the
total size of the payloads of all the subelements in the sequence.
Add common helper functionality shared between these APIs.
CRs-Fixed: 3124120
Change-Id: I26d2d75670dbb99c927517181d58f4d816ae754b
Added HAL specific api to support tx monitor,
1. to get buffer address
2. get number of users
3. get corresponding structure to handle tx monitor and
4. parse limited TLV tag.
Change-Id: Ic354c76b3bcf5fa454db973c2aa4ee5f9c1b4208
MCL host only has one pdev with pdev id as 0. If pdev id indicated
from FW is bigger than 0, MCL will not get pdev. Get pdev with pdev
id 0 in this case.
Change-Id: Ie43fc2d78d31ebaa3f32076704d81439f1d46830
Remove target type #ifdefs for multi WMI svc by setting
WMI_MULTI_MAC_SVC in makefile.
Change-Id: I46d968328825ff8f6578cf3ba4454f559d5a7315
CRs-Fixed: 3131513
Flush dp cached frames only for mld peers and legacy peers, as
link peers don't need it.
Change-Id: I19a27c5810a1fec6a62bfe5a6377073dc382fb4c
CRs-Fixed: 3131405
KIWI V2 WBM completion release reason codes are changed to match legacy
lithium release codes. Takecare to enable translation only for KIWI V1.
Change-Id: I094f40440b290ae424b47a7ba176b81ffea6c592
CRs-Fixed: 3132359
Add QCA_NL80211_VENDOR_SUBCMD_MCC_QUOTA. When two or more interfaces are
active on the same band and two different home channels (MCC), the
target may allocate quota of "on channel" time for each home channel.
The target will indicate the quota information to application layer with
this event. Application may do TX bitrate control based on the
information. The user may also set the MCC quota for an interface by
using this command.
Change-Id: Ic8d8c5a5f2a6f0c55fd46394fa8e2062a37abefc
CRs-Fixed: 3101791
Add default queue map config msg handler. This msg is sent by the target
in response to a default queue map request.
Change-Id: Id08e0b175172614514b9fb2dcabcc5f7f068896f
CRs-Fixed: 3126854
Remove Legacy Qwrap max client mode code as part of Legacy
RE code cleanup. Old change (same code changes as new) was
reverted as some PF checks were missing/skipped before merge
due to an IT issue
Safe to merge now as IT issue has been resolved and all PF
checks are enabled again before merge.
Change-Id: I2f6ae57a27d50c31115d89e57281dc1f7094d71d
CRs-Fixed: 3125196
Support TX completion and RX delay tracing by Ftrace for KIWI,
Add generic IP protocol packt tracing like ICMP packet.
Change-Id: Ie0c4b1764ce953fd2ed41fc5eea8aa28c8d427d9
CRs-Fixed: 3126080
When CONFIG_BAND_6GHZ is disabled, compilation error is observed
due to the absence of the declaration of reg_convert_enum_to_6g_idx
and reg_get_reg_maschan_lst_frm_6g_pwr_mode.
To fix this issue, add static declarations for
reg_convert_enum_to_6g_idx and reg_get_reg_maschan_lst_frm_6g_pwr_mode
when CONFIG_BAND_6GHZ is disabled.
Change-Id: I616de6cd2630be1897da6cd87a29569e51bf058e
CRs-Fixed: 3131119
For 1x1 DBS case, host also need to configure max_mac_rings
as 2 and initialize each RX ring, currently host only consider
2x2 DBS case.
Check DBS capable instead of 2x2 DBS capable only.
Change-Id: Ic2d4fda9be245a3d0448b6b87ba8676f41d9187e
CRs-Fixed: 3129165
