Support to send WMI_ADDBA_CLEAR_RESP_CMDID in tlv format is
lacking in HK. Add the necessary support.
Change-Id: Ic5bda1cd69531ce7eb6f61751b12626b788c02a1
CRs-fixed: 2174262
Add converged implementations of MAC, IPV4 and IPV6 address parsing to
QDF. This allows for reuse wherever address parsing is done. This also
supports the upcoming configuration component, which will support all
three address types.
Change-Id: I5158e2a40169da979a219363c6d2a25784c5a7e8
CRs-Fixed: 2174072
Add new WMI EVENT, SW FILS Discovery Alert Event, to get
firmware trigger to transmit FILS Discovery Frames.
Add WMI command to send FD frame buffer to firwmare.
Add WMI command to set FD period interval in mili seconds.
Change-Id: I8cb6279ec4431b9236bd32c548228a0dc6598664
CRs-Fixed: 2118098
Fragment count will be larger than the upper limit which
would lead to an overread of fragment length. Upper limit
check for fragment count is added in this change.
Change-Id: Icc078b2efee554ac84377b5edd90d0a5c7a61f98
CRs-Fixed: 2158922
REO queue setup is getting triggered from processing
pending null queue exceptions in WBM release ring, after
sending peer delete command to FW, but before peer unmap
is received, causing target assert. Mark peer deletion
before sending peer delete command to avoid this.
Change-Id: I2d85d01e049cb37d9321beeee8e41f44e40e68ad
CRs-Fixed: 2155420
Add ppdu tid tlv value assignment in cdp dp stats layer
ppdu tid value is used by apstats command it was earlier
showing zeroes
Change-Id: Id24b08d2424dcc09424624d84044b3963bd81b36
cck rates were getting updated for ofdm rates
and nss index were getting wrongly incremented
fixed the same
Corrected sgi and preamble too
Change-Id: I2dabb685de6e0bd4ba5094845cde228b3c32e2a9
In current code GreenAP transition time is being set in
milliseconds. Add change to configure PS transition time
in seconds.
Change-Id: Ic42b1f40851966e6e0f4f613de06fdf50ec2d7cc
CRs-Fixed: 2142183
TDLS teardown request from the DUT is dropped
in the peer, due to invalid MIC in the
teardown frame.
TDLS responder value is not set correctly in TDLS
teardown frame, and it causes MIC failures in the
peer device.
Set the correct responder value in TDLS
teardown frame.
Change-Id: Ibe056c89f644c094a10f7a5eb51b6d90a13a4a01
CRs-Fixed: 2155555
Currently, nbuf map tracking happens before the nbuf is actually mapped.
In cases where the actual map operation fails, remove the nbuf map
tracking information to avoid false positive mapped-never-unmapped
panics.
Change-Id: I8e649841a661d460bf89dd5edf09bb5e460ea98c
CRs-Fixed: 2171837
Hold a spinlock for the entire iteration of the nbuf map/unmap
hashtable. This prevents invalid list/memory access issues in case of a
race with an unmap operation. This also trades list/memory safety for
the chance to watchdog bite while printing. Since we are about to panic
anyway, the worst case is manually loading the memory dump to inspect
the contents of the map/unmap hashtable.
Change-Id: Iafc38764d55fc46910051349e4f4b26da33cae51
CRs-Fixed: 2171736
An nbuf free history circular buffer already exists for tracking recent
nbuf frees in the system. This is very useful for debugging tricky nbuf
related failures in the driver. In addition to tracking frees, track
alloc, map, and unmap nbuf events as well.
Change-Id: I253d454d689deb8328b3636e92063e9d33ea1a52
CRs-Fixed: 2170365
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
When nbuf map/unmap tracking is enabled, a small metadata structure is
allocated to keep the tracking information. In cases where this
allocation fails during the map operation, return an error status
instead of mapping the nbuf. This prevents a false positive
unmap-never-mapped panic when the nbuf is unmapped.
Change-Id: Id01c1f61165a0beff4edd6cc6a0a2fc5f64d9b04
CRs-Fixed: 2167082
When MEMORY_DEBUG is enabled, track calls to nbuf map/unmap to detect
the following usage problems:
* double map
* double unmap
* unmap without map
* never unmap
Change-Id: I7326bb628d4cf0be9004398fd396907b1a06bf22
CRs-Fixed: 2155599
Update mon_rx_status fields for HE case. Also
added rs_fcs_err field to structure and populate
its value.
Change-Id: I4681543c7d6c6c7ac0d666cd93072caaee285585
The nbuf is not freed for all possible branches in rx_wbm_error_pr
cess function. Add fix to ensure the nbuf free for all conditions.
CRs-Fixed: 2171899
Change-Id: I8e40fc7dc5afb0be0257244e1e704a0200ffacc0
HK needs support for sendaddba/senddelba cmds. These commands
need to be sent to the FW in tlv format. Make the necessary
changes.
Change-Id: Ia069a05dbbd710393ecab31c5bd2c1bcf28d0e1e
CRs-fixed: 2171669
Check for channel list size before accessing it to avoid
possible buffer overflow
Change-Id: I2cf36adb2651a40d6e186deaef58330d1c0105ca
CRs-Fixed: 2160756
Support added for the following:
1. The counters for Rx offer, Tx Offer, MgmtTXFail.
2. Block mgmt frame from a particular mac address.
3. Display NSS for associated clients.
Change-Id: Ic0f6ea8f7b94f998f6a9d2d3e1adc3a71c79056b
Adds logic to use default RSN IE fields if optional fields are not
present in IE. So if RSN IE doesn't contain AKM, group and unicast
cipher, use the default AKM(AKM_IEEE8021X) and cipher (CCMP).
Change-Id: Icabfb8b88b294e935908b249462a61124aa76268
CRs-Fixed: 2164531
Add ini to configure BTM offload configuration
which is sent to firmware as part of RSO start
via wmi btm config cmd.
Change-Id: I69c792705b208014af8f1878f7645d957dde6c06
CRs-Fixed: 2105112
Add function pointers to set/get chan 144 support, program
country code and get current regdomain information from
regdb component. These information is used by WIN offload and
lmac layers.
Change-Id: I6344260a7761e958eeee9e5d7faf091812ed4ed2
CRs-Fixed: 2160593
Loop through the active scan commands in the serialization
queue and find a match based on the scan ID provided. The API
wlan_serialization_get_scan_cmd_using_scan_id already exists
to achieve this. Move this API to wlan_serialization_api.c so
that it can be utilized by everyone as a public API.
Change-Id: If7250e1c994c728cd89f5d76db0023967027f12a
CRs-Fixed: 2169467
When invoked wlan_cfg80211_cleanup_scan_queue, it will try to clean
up pending scan requests in queue from kernel. However, when the
netdevice is down, this request could be already freed by kernel.
To fix this issue, also add the pointer to netdevice in scan_req
so what we can check the status of netdevice in scan_req instead
of cfg80211_scan_request which might already be freed for this case.
Change-Id: I6189c52b638bc4f408e4d4c694c178c7d2f3de52
CRs-Fixed: 2164404
Remove dependency of extender ap on VAP layer and radio(ic) layer data
structure
Change-Id: Ib336f518847abd1b29f5ea3cfd1a508dc2cd14e8
CRs-Fixed: 2148247
This change provides inline APIs to access dp handle
These set/reset APIs will be invoked by legacy code
Change-Id: I47f87cfc56b91766d21190bb3c34f018c4704269
CRs-Fixed: 2148247
The pointer to peer is dereferenced after memory free in peer
_unref_delete function. Fix the issue by changing function
call sequence.
CRs-Fixed: 2167698
Change-Id: Iebd8f958bde4964c16a3c312d037e8f06e319350
Address minor review comments raised against previous change
Ic417f6b008fdc769227c7a23bc8e01a2064ce928. Specifically, remove function
recv_packet_completion() and member EpRecvPktMultiple from struct
htc_ep_callbacks.
Change-Id: I431579356664ad6a6274f58352adf8ce273e084f
CRs-Fixed: 2168647
While populating preferred channel list array, length
has not been checked against QDF_MAX_NUM_CHAN which
is size of PCL.
Fix it by checking indices and length against QDF_MAX_NUM_CHAN
CRs-Fixed: 2169424
Change-Id: I8c4d050bfc7040fba052eb42b32a91302a0a0ecb
Sending all frames to firmware will have high throughput impact.
Queue mesh frames also to TCL/TQM and send cloned frame to firmware
only if meta header information is changed to update meta header
information. Increased meta info size as per new ext2 header.
Change-Id: I89ff27994477a5637979a9cd6a397286144b2535
CRs-Fixed: 2162643
Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
Adds support for vendor attribute to enable RSNIE test mode. Once test
mode is set the driver will use the RSN IE's as-is from the connect
request. Exclusively used for the scenarios where the device is used as
a cert test bed and not recommended for production.
Change-Id: I5ae9856fe9fb0785a625cadd9a1fed1752bcb08a
CRs-Fixed: 2164530
Current opportunistic timer chooses session id as 0 up on expiry
which creates the issue when session id 0 doesn't exist.
Fix the situation by dynamically choosing existing session id to
complete the action.
CRs-Fixed: 2166667
Change-Id: I2e1da2ba0078381a5e91decd32d32b8ad77cec19
