Add the following stats.
- Number of Spectral events received from the target
- Number of consume_spectral_report() invocations
- Number of fill_samp_msg() invocations
- Number of SAMP messages that are ready to be sent to the user-space
- Number of SAMP messages queued to the user-space
Change-Id: I53fda4b309620043a77bc2bc87573941d7fb0bcb
CRs-Fixed: 3156151
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
While copying FFT bins from the target, Spectral Host driver reads
one DWORD (32-bits) at a time and extracts FFT bins out of those DWORDs.
This extraction uses standard bit shift and mask operations as below.
#define QDF_GET_BITS(_val, _index, _num_bits) \
(((_val) >> (_index)) & ((1 << (_num_bits)) - 1))
For a chipset that uses pack mode 0 i.e., packs 1 FFT bin per DWORD,
_num_bits in the above operation will be 32. So, we try to left shift the
integer constant '1' by 32. If the integer constant is represented by
32-bit integer, we could have issues in the result of shift operation.
As per C standard, the result of shifting an operand by a count greater
than or equal to width (in bits) of the operand is undefined.
This is because some platforms could optimize the shift operation by
masking the shift count to 5 bits. That means, the shift actually
performed is 32 & 31, which is 0.
Fix this by using 64-bit integer constant '1' in the above operation.
Change-Id: Ic7fe4de7917f3069d78a2ff29d86009cbf381e3f
CRs-Fixed: 3125158
Currently, qdf_spin_lock/qdf_spin_unlock is used to protect
spectral_lock. This can lead to a deadlock when the process
context is holding the lock and gets pre-empted by the tasklet.
To avoid this use qdf_spin_lock_bh/qdf_spin_unlock_bh.
Change-Id: Ibd2be7b7f3faf2dea9d7df8d6468c7a8fda512f2
CRs-Fixed: 3124199
For reports modes 0 and 1, the number of FFT bins in a detector will be 0.
We calculate end_bin_idx as start_bin_idx + num_bins - 1.
When start_bin_idx is 0 for these report modes, end_bin_idx will be -1.
Since bin indices are unsigned integers, end_bin_idx becomes a very big
value and we will try to copy unintended large number of bytes.
Fix this by forcing end_bin_idx to start_bin_idx when num_bins is 0.
Change-Id: I11e5dd673fc95a1ce3823ef977fd70c34a4ec67e
CRs-Fixed: 3096955
For per-session detector map, maintain a different
det_map_valid flag for Normal and Agile spectral scan
mode.
Change-Id: I5a2a0253624a393feba966641d518e59a48f4a8a
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
Each FFT bin value is represented as an 8 bit integer
in SAMP message. But depending on the configuration,
the FFT bin value reported by HW might exceed 8 bits.
Clamp the FFT bin value between the min and max value
which can be represented by 8 bits. For linear mode,
min and max FFT bin value which can be represented by
8 bit is 0 and U8_MAX respectively. For dBm mode, min
and max FFT bin value which can be represented by 8 bit
is S8_MIN and S8_MAX respectively.
CRs-Fixed: 3056458
Change-Id: I9ec75f781a130d3ed0d0d9393975fd5874961ce0
It calls spectral_process_phyerr of spectral operations without any
check. Which cause null point dereference potentially. So, check this
pointer before calling.
Change-Id: Iae246f847dd41e62b628223652a9527a65b43799
CRs-Fixed: 3055246
Populate and expose the following 320MHz spectral capabilities.
- Agile spectral scan support for 320MHz mode.
- Number of detectors used for spectral scan in 320MHz mode.
Change-Id: Ibea77d4ec8b1d9322ef82d1d48236836ffad24ec
CRs-Fixed: 3053059
Pass report parameters to FFT bin byte swap function instead of
FFT bin length adjustment WAR.
Change-Id: I02a280bc4e8e0839c894a70258e1f16a784c08a6
CRs-Fixed: 3051559
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
On Beryllium architecture, PHY DMA applies a 32-bit byte swap to assist
in efficient Host reads when connected to a big-endian Host.
This is done to avoid byte swapping at the Host.
So, if the Host reads this data 32-bit word at a time, the byte order
would be intact. Report headers are not a problem because as they are
composed of 32-bit words. For FFT bins, read each DWORD at a time and
extract FFT bins out of that DWORD. Make this change in a generic way to
keep the design uniform across different chipsets and endian modes.
CRs-Fixed: 3042188
Change-Id: Idff1ac7eb5e18c692c9ee8b19b9ae9e6b962d486
Add Spectral APIs to convert channel width values
from enum phy_ch_width to nl80211_chan_width and
vice-versa.
CRs-Fixed: 3029184
Change-Id: I60fb7fb04b943b0d70c569ff6587e5e8efd7722b
Populate the list of supported spectral scan bandwidths for different
targets and use that in populating the detector list.
CRs-Fixed: 3042448
Change-Id: I5dac2c845843698bbafac64a01517acfbe120180
Initialize the variable "segid" to prevent the usage of junk value.
Dont dereference the spectral-lmac object if the same is NULL.
Change-Id: I5206a99017f77e5c94368d91171a7eb05745933c
Beryllium chipsets support FFT sizes as follows for different sscan widths.
20MHz:- Min FFT size: 5, Max FFT size: 9
40MHz:- Min FFT size: 5, Max FFT size: 10
> 40MHz:- Min FFT size: 5, Max FFT size: 11
Populate these FFT sizes for Beryllium targets.
CRs-Fixed: 3042443
Change-Id: Id7052e3513b29789e96c351aa4cdede499ef2578
Add support to configure spectral scan bandwidth as provided by the user.
Validate the user configured value before applying it. As the spectral scan
bandwidth is an optional parameter, when the user doesn't configure it, use
configure the spectral scan bandwidth to the maximum value supported by the
target for the current operating bandwidth.
Also, populate the spectral scan bandwidths supported for different
operating bandwidths on different targets.
CRs-Fixed: 3042424
Change-Id: I266aa5489b0ce5c149968067a06e1cc65bb4e3b7
Add locks for detector list, per-session report info
and per-session detector map, to avoid inconsistent
concurrent accesses.
Using spin_lock_bh for locking between Process and
Tasklet context.
CRs-Fixed: 2983801
Change-Id: If709fd91f193072f07b9dae19bf48e6da2d369d3
Move the left band and right band edge extra bins to
the end of the Spectral bin_pwr array.
CRs-Fixed: 3002177
Change-Id: Iea93879763a7e2c56cdb5f4d3d163e2d4b082b26
It doesn't check smode before used as array index, the potential risk
is that OOB read or write once get invalid value from target. So, this
change checks smode value before using.
Change-Id: Ibc0625f43e31bc8b49694cca778726c6528290a8
CRs-Fixed: 3034136
In target_if_process_phyerr_gen2(), initialize variables
to prevent usage of junk values.
In target_if_process_sfft_report_gen3(), add check to
ensure the index doesn't exceed the size of the array.
Change-Id: Ie738d1fc836e1a2ec1358b635a4b6c64a424b894
Different chipsets are reporting cfreq1 and cfreq2 in different formats in
Spectral reports. This leads to confusion at the user-interface level.
Convert the cfreq1 and cfreq2 representations as follows before sending the
Spectral report to upper layers.
For a contiguous channel, cfreq1 will represent the center of the entire
span and cfreq2 will be 0. For a discontiguous channel like 80p80, cfreq1
will represent the center of the first segment whereas cfreq2 will
represent the center of the second segment.
CRs-Fixed: 3020790
Change-Id: I86e330c9a3a66701f274e20db2d8bc5934608a6b
As part of Spectral init, the Host sends DMA ring init command to
HALPHY. QCN9224 M2M emulation setups don't have HALPHY subsystem and
the WMI command need to be cleanly stubbed out in emulation FW image.
Until then, revert this Spectral init change.
Change-Id: I88e3e3995ee1b7103a03e4b6a38ff4117044c63c
CRs-Fixed: 3016633
The host can receive some spectral samples even after stopping the scan
as there could be some samples already sitting in the WMI event pipe.
Drop those frames in the driver itself.
CRs-Fixed: 3014336
Change-Id: I8aece67b46aa84e974b538f40ffcb937c855f5a3
In SBS modes, there are 3 detectors shared between 2 pdevs that are operate
in 5GHz band. Global number space is used for detectors across these pdevs.
Detector list should be following in SBS modes.
For the pdev that use PHYA0:
detector 0 for normal mode
detector 2 for agile mode
For the pdev that use PHYA1:
detector 1 for normal mode
detector 2 for agile mode
There is no direct way of knowing which pdevs are using PHYA0 or PHYA1.
We need to look at the phy_id of a given pdev and compare against other
pdevs on the same psoc to figure out whether the given pdev is operating
using PHYA1. Add the necessary support for the same.
CRs-Fixed: 2993772
Change-Id: I034fe64a7a8988e327a60684a0d008f4b22ef395
Use lb_edge_bins->start_bin_idx as the bin_pwr array start bin
index, when left band edge extra bins are present.
In all other cases, use the detector start bin index
detector_info->start_bin_idx.
CRs-Fixed: 3005949
Change-Id: Ic91c3eb386d693b3f929c687e269e882b6bd8f59
The per-session detector map is keyed by detector ID
from the Spectral FFT report and is only valid for one
session, ie. start scan to stop scan.
There is a possibility of receiving FFT report with
an invalid detector ID, for a particular session.
Due to this, invalid detector map information may get
accessed.
Verify that detector ID received in Spectral report is
valid for given spectral scan mode and channel width,
by checking the detector list.
Add a validity flag to the per_session_det_map, and check
whether detector map is valid for the detector ID used to
access it.
CRs-Fixed: 2998410
Change-Id: I1f38ae22b458bb1fea62b99422ec60095071b3c6
Modify APIs target_if_dbg_print_samp_msg() and
target_if_dbg_print_samp_param() to use the
new formats for spectral_samp_msg and
target_if_samp_msg_params, respectively.
CRs-Fixed: 2961953
Change-Id: Ib0776c2189e9ca1dc33d38f2a7609aa6d15959ee
Add a new API free_samp_msg_skb(), to free
SAMP msg buffer, if error in phyerr processing
for 160/80p80 MHz modes. Call this API from
reset_160mhz_delivery_state_machine(), to
avoid redundancy.
CRs-Fixed: 2961987
Change-Id: I3a0488997e474fef6f4f57e3fbfd1a163c91ac7b
Add API target_if_spectral_populate_samp_params_gen2() to
populate fields in target_if_samp_msg_params, using
search fft report and target_if_spectral_rfqual_info
fields.
CRs-Fixed: 2961986
Change-Id: Iad970483f6183d2e52d97e6c3ddf8f146845fbe4
Add API target_if_spectral_populate_samp_params_gen3() to
populate fields in target_if_samp_msg_params, using
Spectral report, search fft report and spectral scan
summary report.
CRs-Fixed: 2945300
Change-Id: Idce57af9a198773491f6c6bc7303641ec0fb15a7
Modify struct target_if_samp_msg_params to only include
fields to fill the new SAMP message format, which
are not present in the per-session report-level
info and detector map structures.
CRs-Fixed: 2961956
Change-Id: I54f69bb63c5b64a59cb83b9f205c74c83475fc14
Add sscan_detector_list struct to store the number
of detectors and detector list for a given Spectral
scan mode and channel width, based on the target type.
Initialize this struct during target_if_pdev_spectral_init.
CRs-Fixed: 2961954
Change-Id: Ia920438429579c096349a0170d15e288d46cf9a9
Add API target_if_spectral_get_start_end_freq to set
start and end frequencies in the per-session
detector level map, based on spectral scan
cfreq1/cfreq2 and operating BW.
API target_if_populate_detector_start_end_freqs handles
population of the start and end frequencies per-detector,
in a session.
CRs-Fixed: 2961957
Change-Id: I68a052db6643d92c22e7ee671f4e46af33c2fa08
Replace numerical values with macros, for indicating
position and size of Spectral FFT report fields, in
target_if_consume_sfft_report_gen3().
Change-Id: I81994ebb0d642bc4cbebe2b24aabcae567ae6a9c
CRs-Fixed: 2945319
Modify prev_tstamp variable in target_if_spectral
structure to an array and index it based on detector ID.
Also, modify target_if_spectral_verify_ts() to include
detector_id parameter and compare current timestamp with previously
received sample on per-detector level, to check discrepancy.
Change-Id: I9f6382909ac0661323db54f160f1350cb8bd8153
CRs-Fixed: 2945318
Add target_if_spectral_get_num_fft_bins() to find the
number of FFT bins, from the Spectral FFT size.
It will adjust the number of FFT bins according to
Spectral report mode.
Change-Id: I8f81f2b784d71387f951c38701af6cf4443246e0
CRs-Fixed: 2945316
