Channel RF info contains metrics that signify the throughput
availability of all the supported channels. This information
is sent in as discrete TLVs (per channel) as part of the WMI
extended service ready event.
Each TLV contains the frequency, bandwidth represented and
the actual channel metric.
Add support to read the above-mentioned TLVs from the extended
service ready event
Change-Id: If947e179c1ca41466997cc48840a8d36b6236780
CRs-Fixed: 2441921
Do bounds check for some Spectral params and throw an
error in case of any out of bound inputs.
CRs-Fixed: 2449740 2449704
Change-Id: Ibc3159267076fa355ab3e50f2d8b0b1524ae444c
Add code to restart timer for a new vdev command being sent to FW,
while we are awaiting for a response from FW for a previous command.
Change-Id: I1847968831cca6b0ee1e49d32b83196061341702
CRs-Fixed: 2450682
The function target_if_direct_buf_rx_rsp_event_handler() handles
the WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID event from target.
This function calls extract_dbr_buf_release_fixed_tlv() to copy
the module id, pdev id number of buffer release entry and number
of meta data release entries. The value of module id is used to
index the array dbr_mod_param to get the value of mod_param.
So if the module id value greater than dbr_pdev_obj->num_modules
could result in possible OOB.
Validate mod_id received in the fixed param of the event
WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID against
dbr_pdev_obj->num_modules.
Change-Id: I1c2c0a2a9c98d8b787496aba7a7c4f8fd781de16
CRs-Fixed: 2428798
Add change to avoid send wmi command in case
of vdev start, multi vdev restart, stop and delete
when vdev_mlme object is NULL.
Change-Id: Iaa3d3f56fb9caf37b933f029c57311edef0281b4
CRs-Fixed: 2443599
Add code to enable sending target_if vdev response to host,
if FW fails to send response within expiry time.
Move timer free functionality to vdev destroy path so as
to make the system not to go into deadlock
Change-Id: I72bdecf2502a755ffc09414f8b72d230bf9c559f
Crs-Fixed: 2449238
Add change to remove setting txbf irrespective
of opmode before sending vdev up cmd
Change-Id: Ic5b604fb34456203f1afda759ab81595ef1ccd04
CRs-Fixed: 2446756
Add target specific HW header for ipq6018 compilation.
Remove the 8074 header dependencies for 6018 compilation.
Change-Id: I8e45e3e039a4596c6722538405dcd381918fa6b1
Rate limit sig/tag mismatch related Spectral logs
so that it doesn't effect the stability of the system.
CRs-Fixed: 2433581
Change-Id: I860089419836f1a6203abe0be5df62eab9dd546b
FW assigns the pdev_id to lmac_id mapping for each platform(HK, CYP, etc).
This information is passed on to host via WMI_MAC_PHY_CAPABILITIES tlv.
Instead of hard-coding the mapping again in host, use the info sent by FW.
Change-Id: I01ad81e97a1b4aa1f0fea3951f6e8285a0f0c039
Refactor the code to move the serialization of
rx reorder queue setup wmi command to target-if
layer.
CRs-Fixed: 2431099
Change-Id: I6b383f5e875fec55c3586dfee576894f6eb35f73
qca6018 support max 80MHz.
Skipping the check to return success for 160 and 80_80.
So, these values can be updated from fw capabilities.
Change-Id: I3c846a343b74251521b978c4569204ad2f4aadcc
Presently even when the ready event legacy callback fails in
creation of the pdev, the error is not propagated correctly. This
can result in accessing the invalid memory.
Check the legacy cb return status and update wmi ready status to
false in case pdev creation fails.
Change-Id: Ia4f94154357debedc94b4b20e789bff80a4047f7
CRs-Fixed: 2426611
Move some stats from tgt_mc_cp_stats_extract_vdev_summary_stats
and target_if_cp_stats_extract_vdev_chain_rssi_stats, from kernel
to driver
Change-Id: I3475421828b51a229af4ac3ff6087d7ebb311c33
CRs-Fixed: 2430565
Add a new beacon tx rate code id to send rate code to fw instead of
sending beacon tx rate
Change-Id: I8cfe6024b9adf4b25c8686e837c94b86dddceab5
CRs-Fixed: 2428706
Currently capability information and RX multicast broadcast
packet count of the connected peer is not getting
cached.
Add support to cache the capability info from assoc request and
RX multicast broadcast packets from FW.
Change-Id: I105e055b1e440852e8e6b508c25e45f79db2d062
CRs-Fixed: 2409521
Modify the comment to avoid the use of restricted words in the
wmi_unified_param and service_ready_param
Change-Id: I50f474bdeed6cfdfd05f0c4bff5bb0c0ed56127f
CRs-fixed: 2427333
Change I498ac1f8cd1d6423032d7b3b8c233656c5f0bf22 ("qcacmn: Have separate
macros for DA/PO/FO to reduce the code size") introduced featurization of
the DFS logic. Two functions, target_if_dfs_reg_offload_events() and
dfs_fill_emulate_bang_radar_test(), were not correctly featurized,
resulting in compilation failures when WLAN_DFS_FULL_OFFLOAD is not
enabled. To prevent these failures properly featurize the functions.
CRs-Fixed: 2366596
Change-Id: I4bcecf95d92cb3ebe2ff893c17755385dda11429
CFR requires to configure the number of DBRs that can be packed
in a single DBR event. Currently, this is fixed value.
Make this configurable at the time of registration.
CRs-Fixed: 2415489
Change-Id: Ifcd606641f986a5345f8ccb361c3f45db07fdc37
Before sending Spectral stop WMI to FW check whether Spectral
scan is in progress. When all vdevs are in down state host driver
will send a stop Spectral scan command to FW. In that scenario there
is a possibility that stop Spectral scan WMI message may go to FW
even though Spectral scan is not active. To prevent this we add a check
in stop Spectral scan routine to send WMI message only if
scan is in progress.
CRs-Fixed: 2424020
Change-Id: I2119935759c40f62df75574b6a29174973f2703f
Per the Linux Kernel coding style, as enforced by the kernel
checkpatch script, pointers should not be explicitly compared to
NULL. Therefore within target_if replace any such comparisons with
logical operations performed on the pointer itself.
Change-Id: I436bb3ec12d331df2260507b6a9afbab84a8a54f
CRs-Fixed: 2418256
'hecap_info_internal' has been added to indicate support for 11ax
proprietary PHY features: 400ns SGI support in 1X/2X LTF and 2X LTF
support in 160/80+80MHz modes. Added the corresponding peer assoc
and service ready parameter.
Change-Id: I34ead9278d8d84ecbc5525867f1584f8c8a4d7b8
CRs-fixed: 2414163
Change the levels of few spectral logs to
INFO so that it won't result in flood of
prints.
CRs-Fixed: 2418342 2418856
Change-Id: Id6a8eed0d5f01f7f44f3caef326b18dc5abcd959
Presently, the driver doesnot extract the peer extended2 stats
(rx_bytes, rx_count, fcs_err) that are received from firmware.
Provide the support to extract and populate the peer extended stats2 at
the driver level.
Change-Id: If1f1bb1ef2d1202581744dd509d0da1da718d8c1
CRs-Fixed: 2397638
Several qdf_*_outline() APIs exist which are straight aliases to their
regular qdf_*() counterparts. Remove them, and update any callers to use
the regular APIs instead.
Change-Id: Ibe6e9cced521b93061e89690ab817ceafe49a469
CRs-Fixed: 2408267
target_process_bang_radar_cmd should be defined with meaningful body only
when WLAN_DFS_FULL_OFFLOAD is defined.
This is for CONFIG_MCL cleanup
Change-Id: Id038231e6aa967c68674f40ef4247ac023313b71
CRs-Fixed: 2411981
In the case of WOW resume due to RA match event, driver will
update the protocol and destination type WOW stats after parsing
the data packet. The same stats are again incremented under RA
match case in TX op that is called in wma_inc_wow_stats. This is
causing counters to increment twice for each packet. Therefore
remove the increment of wow stats from TX op case.
Remove redundant counter increments under RA match event in
target_if_cp_stats_inc_wake_lock_stats.
Change-Id: I10486d083175772f976542a38364ba964c8e1a87
CRs-Fixed: 2406975
A service bit is used to indicate support for MBSS IE.
This is set as capability in host at psoc level.
In host, we also maintain a flag for user to configure
MBSS support at pdev level. It could be used in future.
Change-Id: I31a27a755fb027de93bfe6c9639fdbda9693bace
CRs-Fixed: 2403030
Add change to use wmi_service_enabled for
wmi_service_sync_delete_cmds instead of using
chipset specific name in target_if
Change QDG_BUG to QDF_DEBUG_PANIC in target_if
vdev response expiry handler.
Change-Id: Ie0f3de2a043198e5aaf5a11add3b8e13b6a47812
CRs-Fixed: 2407877
CFR needs to correlate data received from direct dma ring and WMI event
for tx completion. These two events can come in any order. To facilitate
correlation CFR module has to hold on to the buffer until both events
are received and then replenish buffer back to direct dma ring. To
facilitate this requirement direct rx buf module is modified to change
callback return to bool to indicate whether buffer can be replenished
immediatley or not. Also add API to indiciate buffer release/replenish
later.
Change-Id: I848c0e7cf0118156fff7cf37ac9027cdf8e2e416
CRs-Fixed: 2403395
EOK is a legacy definition and frequently misused. Remove references to
it from qcacmn.
Change-Id: Ic3179ad95beb75edb97e1dda7ac879a65a86a2e4
CRs-Fixed: 2404900
Enhance target_if/mlme/vdev_mgr by addressing
review comments and update response handling
APIs to handler timers and response bit maps
as expected
Change-Id: I8a5bf3f2931f0c36a367dfebfc898ed2621f3516
CRs-Fixed: 2397184
Add API to update cmn vdev mlme structures,
with the addition of new members to the new mlme
vdev structure,new api's are required to update
those members which will be subsequently used the
new mlme target if layer to send commands to the firmware
Change-Id: I9618613c0ad00f78003cd32951b30b631934ba71
