Populate the supported colorspaces property for DP
as part of getting the display modes.
This will expose the supported colorspaces of the sink to
userspace and in-turn the userspace shall pick the colorspace
suitable for the use-case.
Change-Id: I70408c719610bc63f9c06dad8cd50f7fa5d94908
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
The UIDLE s/w maintains few state variables based
on which ctl & debug counter hw setup is skipped
few times. Skipping this during idle-pc restore
leads to UIDLE not setup correctly. Fix the state
checks to allow programming the HW.
Change-Id: Ie4be207ebaa4bd1eaebc63b3548837ef611efde7
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Input handler is used for early wakeup DSI and MDP clocks from
idle power collapse. DSI clock won't be disabled in video mode
during idle power collapse, so the input hanlder isn't needed
for video mode.
This change avoids the input handler to be registered in
video mode.
Change-Id: Id23bad192b6671126978d707db464e7aaee1c77f
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
DP specification mandate test pattern #4 for CTS 1.4a. Add
support for the same in link training #2 as per specification.
CRs-Fixed: 2490128
Change-Id: I2f72fec340b56270e7fd1c2940adafe1068bab43
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Print uidle status fal10 enable bit as part of checking status.
Change-Id: Ibe00216ac22bb31fbe0925db3abc1d5dc4371ad3
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
RM does not currently check dsc pairs while reserving, but
this could lead to an incompatible pair being allocated. The
hw restrictions are populated from dtsi and checked during
rm reservation.
Change-Id: If561e2bd64c7643ed9ee71a255242eab84576673
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change adds a check for the length of the buffer
before copying it to avoid a buffer overflow.
Change-Id: I146895660be4060d9896706636257a57c6aef94f
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
During an ESD trigger, a check must be done to ensure
that ESD is enabled on the particular panel. If not the
panel might end up in a bad state, if the trigger is
propagated successfully instead of reporting a failure.
Change-Id: I310578e7136301ab75ba7f44f14d36ed7e6a519c
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Helper function is returning the width of single mixer. During
atomic crtc check, the number of destination scaler is not
considered before width check and can fail possible higher
resolutions. The mixerwidth should be taken as a multiple of
num_ds_enabled.
Change-Id: Id9e5e0ccf0cebb54d2a242e039d8dc3676b3729f
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Adding prefixes for error, debug and info
messages in dp files. To enable debug logs
run "echo 0x100 > /sys/module/drm/parameters/debug"
CRs-Fixed: 2493739
Change-Id: Ibf509e837f527be6bff6b7a1c34b0cde2921b388
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Use two layer mixers only if the resolution of the display exceeds
the linewidth of the given layer mixer.
Change-Id: I1892587816c0718280765353df7eabf82d6d7a18
Update the minimum encryption level only when there is a request
to do so coming from the DRM framework. This will ensure that any
previously set value will not be overwritten while processing
other commands. Failure to preserve the minimum encryption level
can result in secure content playback failure if the sink device
is not updated with the correct value.
Change-Id: Ie9a555a57617096fbdb9e46dd29a973b9223e237
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
This change makes the post PPS command delay a panel property.
By default the value is set to zero if not specified.
Change-Id: I50c86ba0f0cb28ff617435e92e9675e5c35404ca
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Adding debug, info and error prefix for log messages
in dsi files. To enable debug logs
run "echo 0x1 > /sys/module/drm/parameters/debug"
Change-Id: I438ac16954bd1d39450f8adeb7fb17f9ea6f8140
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Break the host initialization and de-initialization to
create late initialization and early de-initialization.
Call host init/deinit on physical connect/disconnect only
As attention messages from sink doesn't change the physical
cable configurations, call only late init/early deinit in
this case to avoid unnecessary hardware resources
re-initialization.
CRs-Fixed: 2490128
Change-Id: Ib930d250724ab3ea811a7388c7ad0aeae1164e21
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
This GPIO is a input signal, so need to set it
to input mode, or it will lead leakage in RBC.
This change is only to fix the power issue.
Change-Id: I87716f646c75dac2f1350a2ea55188829a4ccc9e
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
This pin is a output pin from panel. Panel can
output signal of internal VSYNC and ERR_FLAG.
Change-Id: Ib8e661ca1fdb33bb7060935edb9bc1f1a858c4b3
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Change calculates and updates correct pclk that is being
used to drm modes in kilo hertz.
Change-Id: I7aab10c08689697120d4d7c152f30993defd36d3
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Partial update commands are using static memory. For dual dsi,
both dsi's can manipulate on same memory, if partial update is enabled
on both of them. Change removes the static configuration.
Change-Id: I0ca16324a27427d13deaa9d18e3ab4f47fe1cc21
Signed-off-by: Vara Reddy <varar@codeaurora.org>
CWB, DP and WB displays tear down sequence must reset
3d_merge, ctl, pingpong_binding, etc. MDP HW
blocks. This change fixes the tear down
sequence register programming. It also moves flush
sw reset before encoder_disable call. That allows
CWB tear down to update the flush configuration
on primary ctl path.
Change-Id: I21c521b39456af4144cf836c65d46a25c985f51d
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change updates the DSI PHY sequence for Kona target as
per latest HW team recommendation.
Change-Id: I20f6a81bb1112e9e976acae595b985dad7ad4b7a
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change updates the DSI PHY PLL programming for kona target
as per the hardware recommendation.
Change-Id: I706169fb635e72bd0ccd3057107ea749408733d0
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Currently trace always shows up on same process as caller, add
an additional function to allow attaching trace to any process.
Change-Id: I8fc124f9d1cfae28d1868a9a3067d0e92eda934e
Signed-off-by: Adrian Salido <salidoa@google.com>
(cherry picked from commit 52ba2d3585eb49c5d5b90b3cd75e0abe5c984dad)
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Trace counter is not properly showing up on trace as is. Replace it with
proper format by refactoring existing trace to be more generic.
Bug: 119295905
Change-Id: I50abb593cd67c10ceed115380ac0e9d2177f0963
Signed-off-by: Adrian Salido <salidoa@google.com>
(cherry picked from commit 89ac1949eaa1524e4e2bbd2ad8c8b6513ae594dd)
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Unpaired trace "sde_power_resource_enable" caused tracer parse
incorrect trace points and display weird state on Chrome. Make
trace "sde_power_resource_enable" pair to fix it.
Bug: 122510119
Test: Checked sde trace can be displayed correctly on Chrome
Change-Id: I938b5648a09e00eaea59070af31a2e6469763087
Signed-off-by: Midas Chien <midaschieh@google.com>
(cherry picked from commit 3a335059bf7a200977e8f4e0a4aa5c6ceca3863a)
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change updates connector edid node with proper panel physical
dimensions based on panel device tree file.
Change-Id: I36db9c3e5b5aee926a0d029ae742166fc8c7591c
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Change batches max packet size and read command together, so that
for each esd read, there will not be two independent command transfers.
Without batching sometimes esd thread can hold the panel mutex for
longer time, which can cause framedrops as crtc thread can be blocked on
panel lock to send partial update command and kickoff next frame.
Change-Id: I101283a2559b616911f4312421acb00a8f154dba
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Add checks for LTM sw fuse value to only install the LTM properties
when the LTM sw fuse is set to enable.
Change-Id: I6876bfcf12ddb912e7b7a80e07c33108fd4b85b9
Signed-off-by: Ping Li <pingli@codeaurora.org>
Since other driver module could not use msm_drm function,
then the notify function was moved to drm_panel. So used
the new drm_panel notify API instead of the old one.
Change-Id: I053992d74125807ccbf8991e3ac771dfc3eef732
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Highest bank bit property is read from device-tree, else set
to default value based on DDR type.
Change-Id: I8b31d957e29071b599a7f983cbf8300e293e9e36
Signed-off-by: Prashant Singh <prasin@codeaurora.org>
Set drm_panel to drm_connector. It can get drm_panel
from connector for other usage.
Change-Id: I68430be8aa05f140b88592c38db8e79aa96dafe6
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
A new API to get drm_panel from dsi_display.
The drm_panel was defined as a member of drm_connector.
When doing connector initialize, can set drm_panel to
drm_connector. So this API is needed to get drm_panel
from dsi_dsiplay.
Change-Id: I0ec9de5a9407085048a8fef421b7b28d466085ed
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
When there is a change in resolution or FPS, a new clock rate is
calculated. During such a Dynamic Mode Switch, the clock rate
change pending flag needs to be set after it has been calculated.
This flag is later checked before kickoff and the clocks are updated
accordingly.
Change-Id: Iec102796d5c61d01c567f0b6676e9a6d4ed94268
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
