Currently we are reading early stop scan min and max
threshold to unsigned int, because of which we are
sending wrong values to FW.
Read early stop scan threshold min and max values
to signed int to send correct values to FW.
Change-Id: I2e96b3c3e9fb48352d8075a4e7a96eae41dacedc
CRs-Fixed: 3191076
Currently STA can scan and come up on 6Ghz or 5Ghz indoor channel
if hardware is non-dbs and SAP is present
As part of this change, do not allow STA to connect on 6Ghz and
5Ghz indoor channel for non-dbs hardware if SAP is present
Change-Id: I48ed8483225e35d8b898b0325eee398f74e41c97
CRs-Fixed: 3196247
Enable SAP and GO D3 WoW feature by default since these features
are controlled by FW WMI service capability as well and hence for
older FW which does not support SAP/Go D3 WoW there is no impact.
Change-Id: I13597c2ee790270b295101252c4548d7c1c93f29
CRs-Fixed: 3199070
QCN7605 HW DBS mode have two index. If DBS freq range fill two
index info, function policy_mgr_are_2_freq_on_same_mac will
not return correctly. So only fill DBS freq range when no freq
info are filled.
Change-Id: I4a8b6dbd470db3f3ecc40746abbb02d81272c74b
CRs-Fixed: 3161847
Vote for PMQOS from Bus bandwidth handler in
low throughput case to achieve better results
during parallel throughput test cases.
Change-Id: Ie3e3d18794982a6b08e57b728237b0fc2051e2d2
CRs-Fixed: 3138949
As part of MLO stats feature, add support to process get_station
stats for all MLO vdevs and store them in the corresponding adapters.
Change-Id: I21034f7769290603f1540c84aed55cc0a39defcf
CRs-Fixed: 3181022
As part of MLO stats feature, add support to process link layer
stats for all MLO vdevs and store them in the corresponding adapters.
Change-Id: Ia6d731c94eaa3a355a9deae61d07dd06c5d412bd
CRs-Fixed: 3181021
Currently, we are updating tx_rx_hist without performing a NULL check.
There can be the case where the tx_rx_hist is freed and we are trying to
de-reference the tx_rx_hist, which will cause the NULL pointer dereference
issue.
Fix is to add NULL check for tx_rx_hist before dereferencing it.
Change-Id: I0c298f1c86dd86b6ac987c005ed19b20933ffba8
CRs-Fixed: 3196312
Move wlan_mlme_get_wlm_multi_client_ll_caps API to dispatcher
folder so that other components would use this API to get
the multi-client feature capability flag.
Change-Id: Ib247401b9411c40a838b338a60d44cb187884480
CRs-Fixed: 3181381
Added new threshold corresponding to SUPER_HIGH
throughput and maxed out vote level to PLD_BUS_WIDTH_MAX.
Change-Id: I3d249fde7101d780bcfb6fba830ae2b255f02063
CRs-Fixed: 3194303
Currently no 11be phymode is supported in bus bandwidth vote table,
then for 11be mode, wlan driver vote during throughput test is not right.
Add 11be support in bus bandwidth vote table in Dp components.
Change-Id: I84947ee2f5c4a7693927ef4fba6926cc56f26a87
CRs-Fixed: 3195143
The current maximum buffer size for an ADDBA response action frame is
256 bytes. This needs to be increased in case of EHT session.
Change-Id: I4e4dbe1dbe5c69954d26f73cf51177358c411083
CRs-Fixed: 3185336
This change updates the auth_status and mac address of
roamed peer received in roam_sync_indication from FW to dp.
Change-Id: I27744017c87a956927108c5b3b0f9220d7e42965
CRs-Fixed: 3185110
Based on the ini "sta_sap_scc_on_indoor_chan" the behavior of
STA+SAP in scc is as follows:
1. STA is on 2.4 GHz & SAP is on 2.4 GHz and SAP user configured
initial channel was on 5 GHz, then move SAP to 5 GHz initially
started channel
2. When STA + SAP are doing SCC on indoor only channel and
a) STA moves to 2.4 GHz -> then SAP moves to initialy started
channel
b) STA moves to another indoor only channel -> SAP follows
STA channel
c) STA moves to non-indoor, non-dfs channel -> SAP follows
STA channel.
d) STA moves to DFS channel -> SAP moves to 2.4 GHz channel
e) STA disconnects -> Move SAP to initially started channel
3. STA is on 2.4 GHz & SAP is on 5 GHz non-indoor, non-dfs channel
and STA moves to 5 GHz channel, then SAP should follow STA to 5 GHz
if SAP was initially started on 5 GHz channel. Else SAP restart
is not required and SAP will remain on the 2.4 GHz channel
Change-Id: I655dffff026d8147e13599dddc024980ba157be5
CRs-Fixed: 3186965
Refine the logic in API policy_mgr_valid_sap_conc_channel_check
to support 3 or 4 Vif concurrency case.
If the force SCC result is not suitable for the SAP to start up
for some reason, the API will select an alternate channel for
the SAP. The limitations includes LTE unsafe limitation, 6 GHz
non-support limitation, DFS STA AP concurrency limitation.
Change-Id: Ifd9cbecce697a885ba502b91340502d3e10c2d88
CRs-Fixed: 3176126
In order to debug HMT SAP, need to enable FW AP PS module logs.
Hence, change the default ini value for gFwDebugModuleLoglevel.
Change-Id: I5fc9f22b751f5e9c6b43592ec298462a0abd489f
CRs-Fixed: 3192480
With MLO sta change, when WLAN_FEATURE_11BE_MLO is undefined, non mlo sta
index array is got wrongly, sta+sta dbs check based on it is wrong too,
and policy_mgr_concurrent_sta_doing_dbs always return false, then
2nd STA RSO is failed to enable, vdev level pcl isn't configured too, 1st
STA can roam to all band.
Change-Id: Iaa728222ab4835099899b463285be4fe2de58ea2
CRs-Fixed: 3192971
Fix the indentation of the 3rd parameter for all of qdf_str_lcopy() calls.
Replace the magic numbers with action_oui_id enums in the destination array
index for entries 0-6.
To align with out software architecture the umac code should not be calling
ucfg (user configuration) APIs, these should only be called by HDD/OSIF.
Instead the action oui component should export an inter-component API
wlan_action_oui_* which this function calls.
Change the implementation of the ucfg_ api to call the wlan_ API.
Change-Id: Id75eb6bd1ceb8031ccd0cc9c2f5826872969dc6f
CRs-Fixed: 3192204
One special AP sets MU EDCA timer as 255 wrongly in both beacon and assoc
rsp, lead to 2 sec SU UL data stall periodically.
To fix it, add ini gActionOUIDisableMuEDCA to specify action OUIs to
control MU EDCA configuration when join the AP, reset MU EDCA timer to 1
and config to F/W for such AP.
Change-Id: I0ad26214417d33bafcbb6939a247bebe4f4637f8
CRs-Fixed: 3180249
Userspace sends the vendor command WIFI_TEST_CONFIGURATION by
setting the attribute WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE when
driver needs to ignore the SAE H2E mismatch for 6 GHz connection.
This is needed for certification test support.
Change-Id: Ic26e733e21811a9f19c6e35e27a9d63616c17c1b
CRs-Fixed: 3050391
Initialize struct cm_roam_values_copy to avoid using uninitialized
parameters in wlan_cm_roam_cfg_set_value().
Initialize struct pdev_params to zero to avoid using uninitialized
parameters in wmi_unified_pdev_param_send().
Change-Id: I820db09840431487f1756695a0562f8a794f549f
CRs-Fixed: 3187194
Currently req->ctx.cb_arg is assigned req memory
in wlan_mlo_sta_mlo_concurency_set_link. and passed to
mlo_ser_set_link_req, where req is again alocated
and req pointer of req->ctx.cb_arg is freed, thus
making req->ctx.cb_arg invalid.
Fix is to avoid allocation of req again and use the
requester memory of mlo_ser_set_link_req as umac_cmd.
Change-Id: Ic96efa204662269fe812c195a3bc8a1da5b215ad
CRs-Fixed: 3188737
Add new ini for STA-SAP scc on 5 GHz indoor only channel -
"sta_sap_scc_on_indoor_chan"
When this ini is enabled, SAP moves to the STA channel
when STA is connected on indoor only 5 GHz channel with the
AP. When this ini is disabled, SAP moves to any 2.4 GHz
channel.
When gindoor_channel_support=1, this ini will not be considered and
SAP can come up on indoor channel.
Change-Id: Ia3ebc6d7fc2e6e569cde8e8a8b38ca76036b8fda
CRs-Fixed: 3186938
when firmware sends TWT notify event with status
HOST_TWT_NOTIFY_EVENT_AP_TWT_REQ_BIT_CLEAR or
HOST_TWT_NOTIFY_EVENT_AP_TWT_REQ_BIT_SET.
Host will check the peer TWT required bit and take the
following action:
1. If fw sends HOST_TWT_NOTIFY_EVENT_AP_TWT_REQ_BIT_CLEAR then
host will dynamically change the peer twt required bit as 0.
2. If fw sends HOST_TWT_NOTIFY_EVENT_AP_TWT_REQ_BIT_SET then
host will dynamically change the peer twt required bit as 1.
Change-Id: Ia72aab685adf5b56f674e21ceedc2c498930403c
CRs-Fixed: 3163826
Implement per packet TX/RX support in DP componentization model.
This change will help to process per packet TX/RX path in STA interface.
Change-Id: I3fbd8dbe26ccd24fc50c6e67cd1213c72837cf9b
CRs-Fixed: 3173449
Add peer create/destroy notification support in DP component, so that
DP component gets notified for obj mgr peer creation/destroy.
DP component can use this notifications for its own
peer info maintenance.
Change-Id: I5277a986967c88619b7644d633d84a9bafc9bfbc
CRs-Fixed: 3173476
Implement per packet TX/RX path support for SAP interface in DP
componentization model.
Change-Id: I788dcbe14fe038f50ff5b834b89391408dc5d16a
CRs-Fixed: 3173469
Add target_if API to send ARP request, LRO config and
DHCP indiacation to firmware.
Change-Id: I2d4af7a5da6c29398ab00205654df9be3d90b665
CRs-Fixed: 3165155
