Propagation from qcacld-2.0 to qcalcd-3.0.
Add support to get per chain rssi from fw via
already existing WMI command WMI_REQUEST_STATS_CMDID
and then store it in the station_info structure defined
by cfg80211.
Change-Id: Id50c96dd322b5ca4db34cf2df901730d8b103251
CRs-Fixed: 1005367
Propagation from qcacld-2.0 to qcacld-3.0.
Rename WMI REPORT_STATS_EVENT fields.
Change the names of some of the REPORT_STATS_EVENT fields to better
describe the information they contain, and move some of the rx stats
to be at the peer level.These changes are not backwards-compatible,
but since the current defs are not yet being used by host or target.
Change-Id: I37d0fdf9b65a55f42e935e4917db30c4eb316607
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add tx frame count and MAC clock to WMI chan info event
message.
Change-Id: I79c2a07504a5ff84ebf4b48ca00ef3c299fd15f1
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add/refine 802.11ax/HE defs used in the host/target interface.
Change-Id: I28f5e0c87933f75e555a763c1e3c803a9c435cea
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add ta_max_duration to wmi_ocb_set_config_cmd struct
(and fix some WMI comments).
Change-Id: Ia5fd7aede98940e11f8ab558bcea50b68627de2c
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add HW mode config type in HW mode capabilities.
Add max MU beamformee field to supported flags in
MAC_PHY_CAPABILITIES.
Change-Id: I015c31dbbff9d180c6338032ab03ec025d32ba55
CRs-fixed: 865207
qcacld-2.0 to qcacld-3.0 propagation.
Validate ssid length before accessing the ssid
if the length exceeds max ssid length then return.
Change-Id: I6902a8a3edf6547cf30d37fe5e435ad4f226ac46
CRs-Fixed: 1059205
qcacld-2.0 to qcacld-3.0 propagation
Validate cfg_ini before dereferencing the ini
parameter gEnableRoamDelayStats.
Change-Id: I0b2b78f8838cb1c46c60669b8f327ac18e863e80
CRs-Fixed: 1059205
There's mistake that pld_power_off calls pld_pcie_power_on. Fix
this by calling the correct pcie power function.
Change-Id: I9e968d749479856510e0dd7f32f5babc57b6ebed
CRs-Fixed: 1064058
The CDS config flag bpf_packet_filter_enable is not being populated.
Populate bpf_packet_filter_enable with the corresponding value from
the ini config.
Change-Id: Ia13386e74d43d7a5cad55e4c77f5eb8bcdc9f43b
CRs-Fixed: 1067041
The WLAN_FEATURE_MBSSID conditional compilation flag is no longer
needed since MBSSID is a required feature. Remove this flag and
any alternate code referenced in the conditional compilation blocks.
Phase 3 covers wlan_hdd_hostapd.c, with other *.c files to follow in
future changes.
Change-Id: I740344af895edadbc30cb8a3d8aea2909d9661cb
CRs-Fixed: 1066509
The WLAN_FEATURE_MBSSID conditional compilation flag is no longer
needed since MBSSID is a required feature. Remove this flag and
any alternate code referenced in the conditional compilation blocks.
Phase 2 covers wlan_hdd_cfg80211.c, with other *.c files to follow
in future changes.
Change-Id: Id7171529eaeefe652085bd1ed6377e3cde050694
CRs-Fixed: 1066411
The WLAN_FEATURE_MBSSID conditional compilation flag is no longer
needed since MBSSID is a required feature. Remove this flag and
any alternate code referenced in the conditional compilation blocks.
Phase 1 covers wlan_hdd_p2p.c, with other *.c files to follow in
future changes.
Change-Id: I7c68b0af7181cdabc324d94464ae6ceb8edd66df
CRs-Fixed: 1065945
1) Do not dereference mac_ctx for logging when mac_ctx itself is NULL
2) Use standard logging mechanism such as the QDF infrastructure for
logging purpose
Change-Id: Iedb4b5d20fd7aa85ff1b98e5fab4edb9de51f7b2
CRs-Fixed: 1065301
Once WMA context is retrieved, check if it has NULL value
before dereferencing it
Change-Id: I9896204933deb0588bca51e006e1477d5ed6c03e
CRs-Fixed: 1065301
Some HDD suspend/resume logging messages are vague or include redundant
status codes. Update these messages to reflect what actually happened and
remove redundant status codes.
Change-Id: I5c4a481a8fbbdebe88f2ecffffb1f2189922da4f
CRs-Fixed: 1062544
PM suspend and FW interrupt handler is running at same time
which is leading to multiple race conditions and host is missing
FW wake up interrupt which is causing APPS not waking up reliably.
Define .suspend_noirq and .resume_noirq callbacks and make
sure there is no pending FW interrupt before allowing PM
suspend to complete. Kernel PM suspend framework gives guarantee
that suspend_noirq and device interrupt handler can't run
simultaneously. This helps WLAN driver to reliably detect FW
wake up interrupt during PM suspend and fail PM suspend gracefully
if FW has requested for initial wake up.
Change-Id: Ic82d7dd6b6b743dd3f55b036e012ad0c8bebd50d
CRs-Fixed: 1060748
Register suspend_noirq/resume_noirq callbacks to kernel. It will
make sure no wake up is pending from FW and if initial wake up is
received then failing it should trigger resume.
Change-Id: Ie553dfc1401c2c6934961773bc98a24626a9cd34
CRs-Fixed: 1060669
Currently cfg.ini supports the following configuration items:
gRrmOperChanMax
gRrmNonOperChanMax
However these configuration items are no longer in use, so remove
them.
Change-Id: Ib6f1ea0b86d97132ebf58b09ad1699efc96e592f
CRs-Fixed: 1060775
Previously change "qcacld-3.0: Fix max dwell time for passive scan
beacon report" (Change-Id: Idc0b4f15f2b7464507aacfaefb99e1ba48ad1eca)
modified the default value of the "rm_capability" INI item, but it
also included other changes which incorrectly utilized the obsolete
gRrmOperChanMax & gRrmNonOperChanMax INI items. Since those INI items
are going to be removed from the code, the original implementation of
"qcacld-3.0: Fix max dwell time for passive scan beacon report" was
reverted. To correctly solve the original problem, bring forward the
change to update CFG_RM_CAPABILITY_DEFAULT.
Change-Id: I7a473a5babf7a7b32a633ea1fe6373574457dcb3
CRs-Fixed: 1060775
This reverts Change-Id Idc0b4f15f2b7464507aacfaefb99e1ba48ad1eca.
"qcacld-3.0: Fix max dwell time for passive scan beacon report"
introduced a change to allow some of the RRM parameters to be
controlled by the existing gRrmOperChanMax & gRrmNonOperChanMax INI
items. However those INI items are obsolete, having been replaced
with rm_capability. So revert the change, and a subsequent change
will update the default value of rm_capability to correctly solve the
original issue.
Change-Id: Ie67f9f95ea6832a5aec706a8ec0a42ee49b4844c
CRs-Fixed: 1060775
There is a desire to remove unnecessary items from the default version
of WCNSS_qcom_cfg.ini that is shipped to customers. Currently the
default WCNSS_qcom_cfg.ini contains the following entry:
gDataInactivityTimeout=200
The associated default value within the driver is:
#define CFG_DATA_INACTIVITY_TIMEOUT_DEFAULT (20)
These are obviously divergent and should be converged.
Note that this flag is used to change the value of the MAC CFG item
WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT, and this currently has the
following default value:
#define WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT_STADEF 20
Since all recent testing has used the default WCNSS_qcom_cfg.ini,
converge on the value defined there, 200, in all locations.
Change-Id: I7895911708d5d17f73971254865da2cc177a3c5a
CRs-Fixed: 1063037
There is a desire to remove unnecessary items from the default version
of WCNSS_qcom_cfg.ini that is shipped to customers. Currently the
default WCNSS_qcom_cfg.ini contains the following entry:
ImplicitQosIsEnabled=0
The associated default value within the driver is:
#define CFG_QOS_IMPLICIT_SETUP_ENABLED_DEFAULT (1)
These are obviously divergent and should be converged.
Note that this flag was added in a prior generation of the driver
during WMM-AC certification testing since some test cases would fail
when Implicit QoS was enabled. It is expected that all customers are
disabling this feature, and hence this feature should be disabled by
default within the driver itself.
Change-Id: If611b2b491b81b46c3254146ebd734dc244ffde5
CRs-Fixed: 1062978
There is a desire to remove unnecessary items from the default version
of WCNSS_qcom_cfg.ini that is shipped to customers. Currently the
default WCNSS_qcom_cfg.ini contains the following entries:
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
The associated default values within the driver are:
#define CFG_INTF0_MAC_ADDR_DEFAULT "000AF5898980"
#define CFG_INTF1_MAC_ADDR_DEFAULT "000AF5898981"
#define CFG_INTF2_MAC_ADDR_DEFAULT "000AF5898982"
#define CFG_INTF3_MAC_ADDR_DEFAULT "000AF5898983"
These are obviously divergent and should be converged.
Elsewhere in the driver, in hdd_update_tgt_cfg(), is logic to
auto-generate MAC addresses if no addresses have been configured.
This logic currently checking:
static struct qdf_mac_addr default_mac_addr = {
{0x00, 0x0A, 0xF5, 0x89, 0x89, 0xFF}
};
Since this logic is aligned with the values present in the default
version of WCNSS_qcom_cfg.ini, update the CFG_INTF*_MAC_ADDR_DEFAULT
definitions to match.
Change-Id: Ic34bc67cffad44b4d61cdfeb06776d0e3a63889f
CRs-Fixed: 1062967
Currently cfg.ini supports an "isAndroidPsEn" configuration item.
However this item is no longer in use, so remove the obsolete support
for this item.
Change-Id: I632513b5e6365a658bb02e0a47a40de94b04856c
CRs-Fixed: 1060747
Currently cfg.ini supports the following configuration items:
beaconEarlyTerminationWakeInterval
enableBeaconEarlyTermination
However neither of these is actually used by the driver, so remove the
obsolete support for these configuration items.
Change-Id: I41caec6697c0ff37efcf7db5dd7ab27ff2cdee95
CRs-Fixed: 1060657
Currently cfg.ini supports a "gFlexConnectPowerFactor"
configuration item, and this is used to override the
WNI_CFG_FLEX_CONNECT_POWER_FACTOR entry in the MAC CFG database.
However this MAC CFG database entry is no longer in use, so remove
the obsolete support for this configuration item.
Change-Id: I660a18a2663ca7ce29ca2c8bacf4a869de684ffb
CRs-Fixed: 1060643
Currently cfg.ini supports a "gEnablePhyAgcListenMode"
configuration item, and this is used to override the
WNI_CFG_ENABLE_PHY_AGC_LISTEN_MODE entry in the MAC CFG
database. However this MAC CFG database entry is no longer in
use, so remove the obsolete support for this configuration item.
Change-Id: I24a0dcf3d834ec794d88d16ca092ee25084183ce
CRs-Fixed: 1060636
Currently cfg.ini supports a "gNumRxAnt" configuration item, and this
is used to override the WNI_CFG_CURRENT_RX_ANTENNA entry in the MAC
CFG database. However this MAC CFG database entry is no longer in
use, so remove the obsolete support for this configuration item.
Change-Id: I8a8f7ca382262edee187013425fd41598783342c
CRs-Fixed: 1060626
