In vdev to vdev roaming on HKv2 we can have dp peer on
different LMACs with same mac address. To get the right
peer on PDEV use id match while searching from hash table
Change-Id: I60b4d7018120c9bd6a56913822ce42f24598184a
Check for vdev_id mismatch to deliver NBUFs to stack to avoid
hold peer reference while giving nbuf list to stack
Change-Id: Ic475e00d5b1793ada7b26b7af3322ca2fa51836f
Link descriptor were getting freed by the pointer
of the previous freed link descriptor. This patch
fixes by copying the address of the current in a
local descriptor info and using it to free the
current.
Change-Id: I95e137ba5b1f0ad21b0e6fb39f6671e1d5b65ba6
CRs-Fixed: 2577624
When enalbe DSRC feature, member reg_dmn_pair_id of struct
country_code_to_reg_domain g_all_countries[] may equal FCC10_FCCA.
However, FCC10_FCCA can't be found in array g_reg_dmn_pairs[].
So, add FCC10_FCCA into arry g_reg_dmn_pairs[].
And, fix one compile issue.
Change-Id: I6069c43505e15312d8bd9be48495998c31f1f8eb
CRs-Fixed: 2590094
CFR config is passed on to FW through WMI
CFR feature code is moved into feature specific WMI file.
Change-Id: I00b57ea2ef4ec5520eb565910ac2c0a6478170e3
CRs-Fixed: 2582846
Create new interface ucfg_cfg_ini_config_print/cfg_ini_config_print
to save the ini configs to buffer.
Change-Id: I7bc80d56d3a806a53c299d1347d4a656a6856248
CRs-Fixed: 2579558
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_peer_unmap_sync_cb_set
- txrx_fw_stats_get
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: I4472dc0905edb7700acb4401b117c8876ba455f3
CRs-Fixed: 2541460
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Add the operating classes 129 and 130 to the US, Europe, Japan,
and Global operating class tables in the regulatory component.
Change-Id: I930019c2b14451de57a92c069a77c27fb56d273b
CRs-Fixed: 2587094
In regulatory non-offloads feature, send conformance_test_limit_2G,
conformance_test_limit_5G, reg_domain, reg_domain_2G and reg_domain_5G
information to firmware using WMI_PDEV_SET_REGDOMAIN_CMDID.
If all these attributes are not populated then CTL power limit is
not applied by the firmware.
Change-Id: I1523ab447aec64ec0af42da32318136f90fd17ca
CRs-Fixed: 2518246
The htc connect message buffer is not unmapped,
if the firmware does not send wmi ready event to the
host.
Scenario:
- Host sends htc init command.
- The command is queued into the src ring.
- The firmware has crashed before the Copy Engine
could copy the message to the destination ring
- Due to the above point, no copy completion
interrupt is received.
- The host times out during its wait for the wmi
ready event.
- Hence the htc init command buffer stays unmapped
and unfreed.
As a part of the wma ready event missing cleanup,
the htc connect buffer is not unmapped. Fix this
to avoid missing to unmap the buffer.
To avoid a side effect of sending a completion for
HTC connect command, all the commands are freed in
the htc completion handler in case of SSR.
CRs-Fixed: 2512344
Change-Id: I05026b3cbb764197e6df85c41634002d271a50e5
Use dp_info_rl instead of QDF_TRACE when handling tx completion status to
avoid excessive logging when vdev is destroyed in the another thread.
Change-Id: I1044c6d747ba1c7036664fe0265ec4855b7b4c47
CRs-Fixed: 2591486
Add function name and line number while taking/releasing
references for vdev to trace Object Manager references
Change-Id: Ie8a7d77db2f3c7b58536ab267c665299cb67152e
Add function name and line number while taking/releasing
references for peer to trace object manager references
Change-Id: I93c30d62ecaa979f8c2680eec68f723d2d3c4292
Currently CTRY_JAPAN15 is not there in host regulatory
database and it is still in use. If CTRY_JAPAN15 is set
from BDF, driver load will fail as this country is not
present in host driver database.
To address this issue add CTRY_JAPAN15 to regdb.
Change-Id: I031b766ac34d57193ded4856b1396306cd5bb76d
CRs-Fixed: 2590635
RSSI in the scan entry is a negative value. It was converted to positive
value and if the converted value is greater than WLAN_RSSI_DUMMY_MARKER
(has positive value 295), util_scan_entry_rssi() was returning 0 to the
caller.
util_scan_entry_rssi() is used for printing RSSI value. Since RSSI is saved
as a negative value and caller expects it as a negative value, return a
negative RSSI value from util_scan_entry_rssi().
Change-Id: Ifdeb88dfa42a6927ff29670429d846ff071e9c59
CRs-Fixed: 2576129
Derive pdev_idex from pdev object, not from target_pdev, as
target_pdev's pdev_idx can change in run-time when dynamic
mode switch feature is enabled.
Change-Id: Iff1bf0370764ec462d66f145dddbd1868fae426c
qdf_print_thread_trace() currently uses stack_trace_save_tsk() to save
task stack strace into a storage array, but stack_trace_save_tsk() is
undefined because it is not exported. Switch to using
save_stack_trace_tsk() as originally was done.
Change-Id: Ie90cdd87233581718e9a40436128a92691fc9a17
CRs-Fixed: 2587454
Block ack and ack frame is composed and sent to up
layer after a unicast packet to AP is received for
tx capture feature.
Change-Id: I4b6bb35fa093432539d15d09a93f85a8ec700b34
Reduce the number of CEs used in QCN9000 to 6 since it has only
one mac and requires only 6 CEs. CE7 and CE8 are reserved for FW
and not needed to be configured from host
Change-Id: I989ffdb0219e2628bac5536e25c4cb2dbba6b7fb
Do not request interrupt if DISABLE_INTR flag is set in CE flags.
This check is already present in hif_ahb_configure_irq but is missing in
MSI path.
Change-Id: Icabe68298737dc412949484f6d3fdcd8c05910d5
Add peer assoc parameter for 6GHz Band Capabilities information
for the corresponding FW peer assoc parameter.
Change-Id: I3bc4361e449843cf73db8426d3bd97dbcd9903ed
When FCC type 4 radar is injected at +/-30MHz separation from center
frequency in VHT 80MHz mode, incorrect pulse duration is reported in the
radar summary reports and lead to decreased radar probablity detection.
Fix the issue by capturing pulses with such characteristics and
modify them to fit within the valid phyerror pulse duration range.
Change-Id: Ic6314a372d6909448fbe4eb694c41736d1719712
CRs-Fixed: 2573339
Add wmi resource flag to send packet capture from host
to FW. Register Offload Event Id for packet capture mode.
Change-Id: Icd9e542a517c8b267a228324b7612ddded28f182
CRs-Fixed: 2528439
when lot of fragment frame with invalid peer_id indicated to
host through reo exception ring, excessive logging cause srng
lock hold long time.
degrade log level as a WAR to avoid excessive logging.
Change-Id: Iffb18ad723d1ac5955868cc8ec99bb0198785ee5
CRs-Fixed: 2584610
In case of channel mismatch, RSSI and channel etc are updated from
previous frame. Also in hidden SSID case the SSID is updated from
prev frame for beacons.
So print the beacon after updating these params from previous frame.
Change-Id: Ia4dc4769f7bccf4698074a3bcedefd1909fd2e7b
CRs-Fixed: 2587067
Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2584839
as we are overriding bar ppdu information, we need bar start/end
timestamp and duration.
added resp_type, mprot_type, rts_success and rts_failure in
cdp completion user.
Change-Id: I53c215e948fad8d079e1d4c40ec07d34aff1fefe
Add WMI and objmgr support for maintaining RNR
buffer cache and receive tbtt events for all
vdevs using existing tbtt offset WMI.
Change-Id: Idfed63e104e629fbe455d1cf6202cd9b332f5cf9
On rekey, the STA resets it’s PN to 0 but, the
AP sends out pending traffic with old PN values
before it resets the PN as well.
This causes traffic to stall and hence, TSC (transmit
sequence counter) should not be set to zero during rekey.
Instead, obtain last PN number for a non-bss peer while
configuring new key and pass the values to hostap.
Change-Id: I4a604f23944c941c6ade2f57ab03781bc78f7b40
While preparing roam offload buffer, possible out of bound write
for pmk buffer in send_roam_scan_offload_mode_cmd_tlv.
Change-Id: Iadaf8261ef4440c7cb282af7b1321ebc5d08b5e5
CRs-Fixed: 2579401
remove multiple update of tid for same ppdu stats.
tid is populated from user rate, completion common and
ack ba status tlv. As tid from ack ba status tlv comes wrong
for non-qos tid. we remove the tid populate in ack ba status tlv.
Change-Id: Ia8b0004fc329bf0fecc1a622e199635034c213a7
A value of 0 in TBTT Information Count subfield indicates
one TBTT Information field is present.Test expression in
for loop should consider 0 as a valid value to avoid infinite
loop.
Change-Id: I0dc0f694147b6c4f91a8be0bfbd7c6d4bb95e1f1
CRs-Fixed: 2582936
