Update WSA rload, system gain, bat_cfg to get from wsa_macro device tree.
WSA Bat_cfg change to read from VPHX_SYS_EN_STATUS reg.
Add device tree parsing for these params in WSA macro
and WSA driver.
Remove machine driver method of sending the parameters.
Add default_dev_mode (spkr vs rcv) from device tree for WSA.
Move code from spkr event to userspace controls or probe.
Change system_gain and affected params when switching between
dev_modes.
These changes simplify configuration data and code and allow
more registers to be written during bootup or before playback.
Change-Id: I79966c704adfac1bf2d85aa6519ea574764c7a8b
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
PA_ERR can happen during speaker path setup. Log the
error status in the interrupt handler and clear the error
status for next audio playback to resume properly on
the speaker.
Change-Id: I5800d9505a3036127097745aaa880b73b3e87f30
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Fix isense/vsense gain tables to correct values.
Mark ana_wo_ctl registers as volatile.
Move VBAT_THRM_FLT_CTL to init reg sequence.
Change-Id: Ie04f302719f08b35f1ef9807dff7993c31e3aa43
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
regmap_irq_chip->irq_drv_data is shared by all attached wsa
devices and point to last probbed wsa device. This will cause
interrupt handle issue. Update irq_drv_data per wsa deviece to
resolve this issue.
Change-Id: I013f546d7f1ca6077f0b14e875b135a27325f851
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
during devm_snd_soc_register_card(), the name_prefix can be set
if "sound-name-prefix" is provided in the DT nodes.
The original approach to set prefix would possibly cause ASoC
component probe failed if prefix has not set before probe is called
Change-Id: Ie78d042cda24b7d1d926223d476786e13d965ac7
Signed-off-by: Junkai Cai <quic_junkai@quicinc.com>
Interrupt from wsa884x are not handle as slave_irq is not set.
Add slave_irq for wsa884x to address this issue.
Change-Id: I82edb35b55f6a46d79bd96b7f0f4bfac58583860
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
When interrupts are triggered on the second or third interrupt
status register, current logic cannot clear that interrupt status
after handling it. Enable use_single_read for wsa and wcd regmap
to resolve the issue.
Change-Id: Ieac57e169505d4455dde1dcd0e80e222e3e8eb1e
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Conforms to latest hardware DRE documentation
Change-Id: Ia08b03f519697723e9e260451c5bc68b4b45724c
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Compile for kalama chipset.
Replace wsa883x in kbuild/conf/mk files
Change-Id: I38910d7724e2b95ba79548f46dc152ccf63823ef
Signed-off-by: Matthew Rice <mrice@quicinc.com>
Driver implementation for WSA884X.
Use new script to generate register files.
Modify register naming convention.
Add wsa884x-reg-masks.h and wsa884x-reg-shifts.h
Reverting copyrights to 2019 for wsa884x.h file
Change-Id: Ic3652d6138a2f62ba59a36d4307c732ab6e8db89
Signed-off-by: Shazmaan Ali <shazmaan@codeaurora.org>
