Add parsing code for getting the TLMM base address and size
of each GPIO pin register space along with the GPIO pins
used for the specific panel. This list is used to lend
these IO ranges to trusted vm during the trusted UI usecase.
Change-Id: I10429cfa14265d52e898815c6cf94be27daa5677
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Parse the display peripheral related SPMI SID/Peripheral
mask from device-tree and get the dynamic register range
of these peripherals using the SPMI API. These registers
are appended to the list of display IO ranges that is
lent from HLOS to trusted VM during trusted UI. This would
help in adding restrictions for SPMI registers on HLOS during
the trusted UI use case along with validation of the register
ranges in trusted VM.
Change-Id: I7077dac7962466e845d061e9ccd205f1bc0ce3ea
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
DCS brightness settng can only use HS mode. Add a new
DT property for LP mode choose for DCS brightness setting.
Change-Id: Ibe5867fe344776871eb3a410a8d79d347775f3d4
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Display input touch event is replaced with IOCTL in performance HAL
to early wake up DSI clock.
Add a property to enable/disable display input touch event for backward
compatibility.
Change-Id: Ib6b9123d726e79a2927b05d1ef77c343f01d0c5e
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
This change disables the border color on the layer mixer,
based on the caller's request. This is required to totally
disconnect the layer mixer hardware when it is not
participating in blending the pixels. Having empty blendstage
but border color enabled, allows Layer mixer hw to produce
border pixels even when blend stage is empty.
Change-Id: I8e84aeedffbd42ad793a167a6cc5a3a653864c1a
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Use sde_connector_state_get_topology API instead of
drm_atomic_get_connector_state since the latter can
return a blank connector state if not found in
global atomic state.
Change-Id: Ib5b58c6cab438a367a885308341d6bccc624f777
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
The change adds register mapping of MDP_INTF_[1/2]_TEAR_INT_COUNT_VAL
register to DSI controller. This allows for the controller to read the
line count and frame count of the read pointer during trigger and
successful transfer of DMA command.
To enable the debug feature:
echo 1 > /d/<panel_name>/dsi-ctrl-0/enable_cmd_dma_stats.
To disable the debug feature
echo 0 > /d/<panel_name>/dsi-ctrl-0/enable_cmd_dma_stats.
To read line count value:
cat /d/<panel_name>/dsi-ctrl-0/cmd_dma_stats.
Change-Id: I5cdeb54ca941af05b226a9d7ab332b899ecc5797
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change programs both the ich_rst_manual_override and the
ich_rst_manual_value in the DSC encoder to override the hw behavior.
This override is needed to ensure the position of ich_reset is not
changed during the PPS session.
Change-Id: Ia7619a97beeea495706b4327c34fc49ef2298583
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
The change allows for configuring a command DMA window during which
the command is triggered. The DMA window must not intersect with the
MDP tear check window. Once the command transfer is successful, the
trigger control needs to reset to the default DMA trigger specified
by the panel.
Change-Id: I5485ca1f8e141ed92dc8c77c2daf579634271022
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Mark LTM as dirty when dest-scaler is updated so it matches with
the mixer configuration.
Change-Id: I5f2b166ec5eb0bafc4c75f8b3268c3e85c558191
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change updates min prefill lines for lahaina target.
Change-Id: I004244585c3940bddf600290a7c0fe5b5ef5885e
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Encoder CRTC can be null during modeset concurrecy, so change the log
level from error to debug when CRTC is null for display early wakeup.
Change-Id: I67c2413a284d70c415616921608eaebdf0f7a298
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Correct the peer_usb_comm log message in dp_usbpd sub module.
Change-Id: Iafa49dedcca0d7c8fe84d839a13ed40e69a9552b
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Fix rounded corner single region use case where input
parameters are valid only for the region to be programmed.
Consequently, the other region must be disabled and atomic
check requirements can be relaxed.
Change-Id: I84f213f2c34f7cceb10c54bbba68fa7b0e16caf2
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Added uapi and device_caps changes to enable rotator
compilation and address video device registration failure.
Device_caps field is must for video device registration
unless it is sub device.
Change-Id: I7e2f517e5eb3fc5ec6306bd7cee5972dbbaff3d1
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
As per current design misr enable sequence is happening at
atomic check level. At this state, misr configuration may reset
if clocks are enabled through atomic commit sequence. This change
moves misr enable/disable sequence from debugfs context to
encoder kickoff to avoid misr register reset with idle pc.
Change-Id: Ia4faa200f96b76ba8c7ef3f45a26108e34b5e687
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
The debugfs api for mst control is a multi stage process where the
connector id is selected using the mst_con_id node, which is then
used on other commands such as edid_modes_mst for mode switch.
During mode switch control, the mode is set using the current id
for a display and then the switch is initiated through an unplug
and replug. But on an unplug the connector is destroyed and a new
id is assinged for that display on the subsequent plug. This
change detects this scenario and updates the cached connector id
with the id from the newly created connector.
Change-Id: Ib51566ac9e334d4a0b145b6ae549c59c537cb0cd
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
On hpd low signaling, if MST is enabled, then the dp driver should
send the uevent to usermode and wait for the displays to be turned
off before destroying the connectors. In the current mst driver,
hpd low handling is a monolithic step. This change breaks this
into two separate callbacks into the mst driver so the display
driver can wait for usermode completion between these two steps.
When processing hpd low in sim mode, the mst driver uses the drm
framework's the port detection function. When hpd unplug is signaled
to the usermode, it checks the port status before disabling it. But
since the port hasn't been destroyed yet, the framework reports that
the port as still connected. This causes the driver to timeout while
waiting for the the displays to be disabled. This change adds a
wrapper which will report the port status as disconnected when hpd
low is signaled.
Change-Id: I1c59a4878018a300f258bd67c36d1cf4eaf5f67b
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The default PWM gpio pin mode was not right for PWM backlight
control. If needs to use PWM backlight, must config the
gpio pinctrl.
Change-Id: I5fd6b947d379b53ef4c358be1b935a2ad4970f99
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
During a dynamic mode switch if the DSI clocks need to be changed,
it would result in a sequence of clock off and on operations. If
this happens after a partial update even though the commands are
sent with an asynchronous wait flag, the clock off forces the commit
thread to wait till the DSI command wait_for_done thread is
scheduled and completed. The change ensures that the clock change is
the first operation that occurs during pre kickoff.
Change-Id: I1b4e765cd0281f1539fc4af309247f3bc0867c1b
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change ensure that in cases panel transfer time is specified,
the final transfer time is calculated in accordance with the minimum
threshold time allowed.
Change-Id: I3442d4d3e8a27ec30d93725cb96b229bb94f2ce2
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change add right only pu support by allowing the dsc to be
flushed when one of the dsc is getting disabled. Since the crtc
swaps the mixers in case of right only partial update, this change
fixes the active display mask passed to encoder so that always the
left only dsc gets programmed. This change also fixes layer mixer
configuration where only one layer mixer is driving the partial
update, the other mixer's configuration is disabled.
Change-Id: I2dd2e9a347797bfe07c90e0ca7f999d151fba933
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
During CWB case where writeback connector is disabled
and connectors_changed is set, add support to allow
disabling of corresponding encoder for this connector.
Modify the seamless check for connector to handle
the same. With this cwb + dfps concurrency can
be handled.
Change-Id: Ia8f86bd12ac3c5ab622334fb04cdcb2e2b60f111
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
SDE encoder modeset add and remove the vblank refcount
based on userspace vblank refcount request. This logic
can have race condition with vblank update from
crtc event thread. It is already avoided with
Ibb810ec90e8 ("disp: msm: sde: manage vblank
refcount concurrency").
Change-Id: I1749bff2e2574500db03a405781eab7496f307b2
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
