The order of the panel timing nodes specified in the device tree is
not guaranteed to be the same while being parsed in the driver. This
results in unintended modes being set as preferred timing mode. The change
introduces cell-index property, so that the timing modes can be
accurately indexed and parsed.
Change-Id: I8ccd4d5a15643bfe72bc8be084f5e91fac26feb4
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Change adds support for transferring commands to each sublink.
Change-Id: Iefc0dca7343325cdfe0cf48d41d50e6e2a13bc05
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Change adds support for enabling splitlink sublinks video data swap.
Change-Id: I731b85a5e8fe8638005433819957dd0658f72963
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Change adds support for splitlink and disables
dsc merge or 3dmerge which is not needed for splitlink.
Change-Id: I77a794d3ea6f53988f493a7af792add81abb22f0
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Currently, RFI feature only supports panel that contains
a single timing node. This limits the feature availability
for panel with multiple modes or with DFPS support.
This change adds support for RFI on panels that contains
multiple timing nodes.
Change-Id: I3a7aadf7b6da3518350b2eb815602b13b5c259f5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add a new connector range property and a new entry to the panel
capability blob to publish the list of supported RFI frequencies.
In addition, add the required functions to set, validate and update
DSI bit clock rate value to trigger an internal seamless mode switch
and reconfigure DSI clock and PLL.
Change-Id: I7d19cc369f8c5528709f2f20a51ef02180ebdea4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
When doing const fps RFI, dynamic refresh clock was done
in the next frame kick off, so as the orginal RFI work flow,
the clock setting also should be done here.
Change-Id: Ic3e6a35dc7264df028f5d848ac6f1eea04a95126
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Fix dlkm compilation errors that are due to the use of -Werror
flags used by the build system.
Change-Id: I5e1e9bc63c1361d73e4930aab123212717872ecb
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Currently, SDE_DBG_DUMP takes any number of hw block names along with
few defined strings as arguments. This set of arguments is used to
determine which HW block registers needs to be dumped. Move to a
blk bitmask to avoid passing a large set of arguments. The bitmask is
split based on the clks required to access the HW block for ease of use.
The lower 0-23 bits are used for HW blocks which can be accessed by just
enabling the MDP clks. DP is kept separate as it needs DP specific
clks to be enabled. Add a debugfs node through which the mask can be
modified, which can be useful while using the debugfs dump option to
force a panic.
As part of the change, remove in-log/in-mem enable mask debugfs node
for every debugbus and use a single node to control the logging
mechanism for all the HW blocks debugbus.
Change-Id: Ibb6354b3e3265c9911104bb0f964616eb8a898c9
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change provides support to have per target configuration
of the maximum value for fal1 threshold & updates value for waipio
as per qos recommendation.
Change-Id: I48df0d1c58a8de80f40200b35e406d07621a3f68
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change updates inline rotation version and handles listing
of color formats supported by inline rotation in waipio target.
Change-Id: Ibefc4fdfcf65c7a42642c15af5cf5e873a5b67de
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Calculate line_time once during modeset and allow
each plane to use it instead of calculating for each frame.
It also simplifies the line_time calculation for
command mode display.
Change-Id: I94ce29eec94bfdbee9016fbf93378661ebf79c03
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Add support for the option to enable microidle FAL1 only setting.
Previously microidle enabled would automatically have both
FAL1 and FAL10. Now in cases of higher FPS or DFPS we can
choose to enable FAL1. This change also adds qos recommended
waipio target specific fps limits for fal1 and fal10.
Change-Id: I7aa7d003afc3ac77c671b2467b0e6dedaae772aa
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Rotator llcc is no longer supported. This change removes the
unused code.
Change-Id: Ia1d95e3f4386d25e0d2e06a87802b3f5b694998d
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Cache controller version has been renamed on waipio target.
This change removes the version check as it is not necessary to
enable system cache.
Change-Id: I1d2541d3285f054caa31ae7976759048ee91db18
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change creates a helper function for sde_encoder_virt_enable
which is responsible for setting up physical encoders. Similarly, it
creates a helper function for sde_hw_sspp_setup_format which is
responsible for writing to the static control register based on ubwc
version.
Change-Id: I106f1f2524398daf7285a931971099735ee8dd4f
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Reduce cyclomatic code complexity of sde_connector_atomic_set_property function from 34 to 22
by moving OUT_FP and RELEASE_FENCE property setting code to separate
helper functions.
Change-Id: I8ac171fa5b8631c7133d276dd872a6c79c5e3114
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
HFC feature of demura needs a skip blend plane to be set. If skip blend
plane is not set and HFC feature is requested to be enabled, driver
should skip turning on HFC demura feature. Change adds checks to ensure
that HFC is always enabled with skip blend plane staged.
Change-Id: I923359c7cb143867660b4c1e667f56ed42fa51c9
Debugging of LUTDMA has proven to be difficult due to lacking
information. Add logging for payload sizing, feature on / off,
and dumping of 64-bit buffer addresses.
Change-Id: I6d421f65172a782b79e915501ec9ea00d05dbcdd
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Panel height and width should be passed for partial update offset
calculation. Change passes the offsets to demura partial update
function.
Change-Id: Ic4113d46e8c1643a855f672e7a2bdd848ef99adc
Encoder is disabling planes and unstaging layers from layer mixer. Some
of the crtc features are dependent on the plane being staged. Change
adds api that encoder can call on crtc to stop the features that are
dependent on source pipes.
Change-Id: I4d875155ceb8f66acfe6ce0096141ca7253bb140
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
When states are duplicated ensure that payload addresses are not copied
for range overloaded properties. Allocate the memory and copy the
payload so that each state has its own heap pointer.
Change-Id: I0fb8941f69216a48f73aba9b59338ace9916e179
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Demura HW block needs to be programmed with different sequence for
partial update use-cases. Change adds support for partial update
programming sequence.
Change-Id: I3ea38354b1120d7c545f6680562c47304cd1126b
Clients of dsi driver can register to be notified of panel id
information. Dsi is probed early during the device boot-up. If the panel
id is available with dsi driver none of the clients have registered
that early. Once clients probe and they register with the dsi driver
panel id is not passed onto clients until power on of the dsi. Change
adds support to notify the dsi clients during registration if panel id
is valid.
Change-Id: Ic475060cbec5f5b645aed865939fffe66aef071b
When dual layer mixer topology is used for demura, left and right demura
blocks need different programming sequence. Change adds support
to program the required offsets for dual layer mixer demura topology.
Change-Id: I6c15e27148f12459098fa0d01650cd05b16817c6
For Demura continuous splash hand-off, the DTB must already have
a definition for a demura panel ID. This is necessary
as ABL currently only updates this node and will not add it in
if missing.
Introduce special handling to identify a panel ID of 0 as a dummy
node, and set all invalid cases to the panel id ~0x0.
Change-Id: I70315c1b32cce9bcd2f6142515f2355a489d470b
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Recent investigation shows that color processing properties are
incorrectly being cached in validate. This can result in unwanted
color processing properties being applied if a previous commit
failed or was validate only.
Add color processing properties to sde crtc state instead of marking
them dirty in color processing driver. When atomic commit is called
properties from state will be marked as dirty and applied.
Change-Id: If231a1f028e4cbd0b50eb0a947f4d58f94390a0c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Extrapolate the Demura plane configuration from the Demura DSPP block
on cont-splash boot, and pass this information to DRM clients via a
CRTC property. This will allow user-space to be aware of all plane
reservations, and avoid plane mangling in multi display use-cases.
Change-Id: I6d216f555fcddbd19c18b6209dc830c21f6be5a4
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Previous design had the demura panel ID passed in on the Linux kernel
command line. Update the DSI driver to read this information from the
DTSI instead.
Change-Id: I7697bb34a313f1837b80ba5ff78e720e8131a819
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
In cont-splash use cases the bootloader's Demura configuration
must stay operational until user space takes over display control.
Introduce Demura shared memory region handling to ensure
Demura configuration data stays consistent and accessible to the
hardware.
Change-Id: I5ef20ad9286574904b3d33a4179629d5a16746cf
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Add prefix of sde to demura properties to keep it consistent with other
sde property names.
Change-Id: I7b666b8a3c1ef79a112911999a736bba368b0cf0
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Expose overall DSPP and DEMURA counts on CRTC object to allow
DRM clients to make better policy decisions.
Change-Id: I59d795cafc829e8b2fe6a3f2fe597c7d5925105d
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Built-in display can switch to dual layer mixer topology. In this
topology if demura is enabled in dpu, then 2 demura blocks have to be
configured as left & right blocks. Change adds support to add dual layer
mixer support.
Change-Id: I82d1726d8d48ffc58af156837521efc5429572a7
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Continuous splash setup checks the CTL configuration to determine and
log all planes that have been enabled for continuous splash boot.
This logic currently only checks the planes mapped to each LM on
a given control path, resulting in data planes being missed.
Update the boot plane enumeration logic to additionally check the CTL
fetch active registers to detect and log missed planes. This logic
checks against all planes found through the original enumeration path
to avoid logging the same plane twice. Note that planes found via the
fetch registers are assumed to be used across both rectangles due to
hardware logging limitations.
Change-Id: Ic1f4aaba94111fe096ba9764eeaef242beb6adf5
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
