- Add MLO Quiet IE related parameters in ml_bcn_partner_info structure.
- Populate MLO Quiet IE related parameters in the beacon template.
Change-Id: I5a4a069d067bdbc5e7c44c407f51a504e9aba151
CRs-Fixed: 3088019
Remove Union between link_num and vdev_bitmap as
it is possible send vdev_bitmap along with link_num
for forcemode MLO_LINK_FORCE_MODE_ACTIVE_NUM and
MLO_LINK_FORCE_MODE_INACTIVE_NUM.
Change-Id: Ie15c5f20d7990baebee50bdc7a37734331eb891c
CRs-Fixed: 3090334
Add EHT vdev param multi user configuration defines for each
bit field of the param.
Change-Id: I5f064cff01d30a86086bec0a65561c10e72c613d
CRs-Fixed: 3052451
Some p2p action frame needs big retry count than the default
max 15 retry count to get high tx successful ratio.
FW allocates 3 extra bits for retry count setup.
To use this field needs FW change in CR 3082533.
Set the extra 3 bits "retry_limit_ext" to "tx_param_dword0"
field for WMI MGMT send command. Existing 4 bits
"retry_limit" combines with this new 3 bits
"retry_limit_ext" to create a 7 bits retry count:
bit 0 - 3: retry_limit
bit 4 - 6: retry_limit_ext.
So Maximum 127 retries can be specified to a certain mgmt
frame.
To use this field needs FW change in CR 3082533.
Change-Id: I889933ea1750c03701ba8a60340f27e6c2594c1b
CRs-Fixed: 3082534
As the fw interface are changes are merged for ME6,
Enabling ME6 feature by removing PEER_DMS_CAPABLE flag.
Change-Id: I0535abadd8dd270f124ba620fe7faed05eb77a26
As part of new enhancements, driver is supporting MAC address update
after VDE creation in the FW. To support this feature add WMI support
to send MAC address command to the FW.
Change-Id: Ie4b7291520793c8aa501fefccaf7b91ab22e9054
CRs-Fixed: 3084119
WMI includes are not part of include path in some WIN projects,
move MLO related common definitions to wlan_mlo_mgr_public_structs.h.
Change-Id: If63c82bc15a2a0e0a045be896b74ea9addb3a64d
CRs-Fixed: 3083776
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: I8537147104f30b74ffb2e87946f2e5f4b129f0df
CRs-Fixed: 3075460
When WMI diag events are received over CE7,
wmi handle is mapped to null and all the diag
events are freed without processing.
Fix this by properly mapping wmi handle when
diag events received over CE7.
Change-Id: I3dc4f7ce37981a31cb6f01fc66edf6248682bea3
CRs-Fixed: 3082960
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to FW at the time of vdev creation in wmi_vdev_create_cmd.
FW uses this vdev_stats_id to fetch the stats from HW.
Add logic to convey vdev_stats_id to FW at the time of vdev create.
Change-Id: I91782c73a7f3f94175a0c28ab4adda2d894856db
CRs-Fixed: 3069992
For MLO, we need to designate one of the link vdev
as mlo vdev, on which FW will accept the multicast
frames and for the other link will drop the mcast frames.
So as part of vdev start, we indicate the mlo mcast
vdev in the first vdev of the mlo.
Change-Id: Ic962a6e1fead4a3cab7c622583392ecf373f4783
CRs-Fixed: 3080525
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
Currenly whenever there is a wrong tag in the event given tag
and expected tag is printed without pointing to the which tlv
in the event has caused the issue.
Add more information to point which tlv in the event is wrongly
populated which will help in debug.
Change-Id: I606781548290949d1954b45767fa47afc4e22481
CRs-Fixed: 3071031
Add support to extract the freq, cfreq1, cfreq2, PHY mode, Destination
macaddr, and channel BW values from the RTT measurement request buffer
received from the LOWI application. Pass these values to a registered
callback. Users can use these values to make some decisions on the RTT
scan.
Change-Id: Idb2232c07bbfa2946dc01e75908b9a6036597ecf
CRs-Fixed: 3060685
Classify qmi/wmi by request type, only TYPE_STATION_STATS
is designed to be sent by qmi so far. other type will
continue go with wmi.
Change-Id: Ibaee99c0a9d59b0db634e84f3c0b6e40b65a185d
CRs-Fixed: 3077792
While parsing the BTM request candidates TLV, there is a
wrong conditional check to avoid buffer over read.
Fix invalid conditional check for BTM preference
Change-Id: I76e55cebc9525ee4a690747c9372c6f2a8166325
CRs-Fixed: 3078160
Add new wmi ops extract_inst_rssi_stats_resp to extract instantaneous
rssi stats resp.
Change-Id: Idce8a5fb0036145aa14682997ca5101666772c70
CRs-Fixed: 3058799
BTM token value is always 0 in the BTM logs.
Copy btm token from the roam_trigger_data tlv in
the roam stats event.
Change-Id: Iebfb07c5a05bad202fbd5a2f52ddcee5243dedb8
CRs-Fixed: 3075276
Waikiki facilitates a dedicated CE (CE14) for
direct DMA & diag handling purpose. Changes to
register the respective service handler to process
DBR and DIAG events from the target.
CRs-Fixed: 3057986
Change-Id: I4ae1d5676ac702d1f28f3e4031b47ffcd1d2ad7e
Currently the WTC duration is not filled from the roam stats
event. This causes the WTC duration to be always 0.
Fill WTC duration from Roam stats event.
Change-Id: Ie616ea1e9a61168f918dc2ac1b5a217901795405
CRs-Fixed: 3073673
INI item enable_dynamic_pcie_gen_speed_switch is no longer needed
and hence deprecate it.
Change-Id: I4d00c761fd21353bdd880a9c93f2faf4fc174264
CRs-Fixed: 3068091
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
This change aims to fix compilation error caused by implicit
conversion between enumerations when -Werror and
-Wenum-conversion are enabled,
Change-Id: Iaabdbe6203f6740b5d0bedade0773f1d2304aeaf
CRs-Fixed: 3063133
This change introduces the new roam set param WMI command to set
the roam params from host to FW.
Also added a fail_bssid param in wmi_roam_result TLV to know the
roam failed AP BSSID from the FW.
Added a new vendor command event for sending roam events stats
attributes to userspace.
Change-Id: I7a08635a7912cbd940d90a2d62433296740ad913
CRs-Fixed: 3050799
enum wmi_channel_width has defined WMI_CHAN_WIDTH_160P160
and WMI_CHAN_WIDTH_320. Therefore add corresponding
definitions in enum wmi_host_channel_width, which is then
1-to-1 mapped to enum wmi_channel_width.
Change-Id: Iff5dc1f678874e1d15581a1ebbacc06c25d09699
CRs-Fixed: 3062062
Handle announce timeout value that is received as a part of
the TWT setup command and provides it to the firmware through
the WMI_TWT_ADD_DIALOG_CMDID. If timeout value is non-zero
then firmware waits up to timeout value to use data frame as
announcement frame. If timeout value is 0 then firmware sends
explicit QoS NULL frame as announcement frame on SP start.
Change-Id: I682d1dc4e304042e4e9b8d6c6a73dc13fbbdccab
CRs-Fixed: 3053956
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: Ib695a0e5d032af4be27fef59f3c5123a35428d7d
CRs-Fixed: 3046987
Add wmi support for eht vdev params
mu mode, puncturing mode, ltf config, dcm
and range extension configs.
Change-Id: I6cfc0297a4a323775614f28717c50109558dd401
CRs-Fixed: 3052104
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: Id3171956028d6086f85eac73865c37498926d6cc
CRs-Fixed: 3049946
Add 11be D1.0 Mac and Phy capability defines.
Corrected lengths if the capability fields.
Change-Id: I40e2d048946857498c425ca01c3010f255081833
CRs-Fixed: 3025958
For enabling LPI/SP mode host service flag bit is expected
to be enabled. Updated the variable name appropriately to
correctly reflect interpretation of the Host service flag.
CRs-fixed: 3024535
Change-Id: Ie5fa2b4036074bf5304c17984007401f821d6d04
Currently, host allows NAN log messages from firmware upto a max
size of 200 bytes. But firmware may need to send bigger messages
than this in case of stats events as tx/rx stats message length
can go upto 350 bytes.
So, allow NAN messages upto 400 bytes to avoid splitting
the stats messages.
Change-Id: Ibb03944da81ed8d378dadbf4750013e0fe941e57
CRs-Fixed: 3049258
Handle QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF attribute
in TWT setup command to provide absolute TSF value to firmware.
This helps application to start TWT session on specific TSF value.
Change-Id: Ic25b45e88599a024e6c4e6bb265ea90122405d05
CRs-Fixed: 3029020
Send responder pm mode info in twt setup event and twt
get session parameter response.
Change-Id: I1f58e0bed62f152d84cec20ff7924d05e126347f
CRs-Fixed: 3029014
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
With this change add log with scan channels list dump to print
if NAN is enabled or not for any frequency.
Change-Id: I81f5017c7f146d2c7bd227601ae320d9cc67f82f
CRs-Fixed: 3042903
