As bank registers need to be reconfigured after
soc deinit. Initialize bank profiles in SOC init
instead of SOC attach
Change-Id: I3baaf62e1cb73d2882d03012e9e078523dcfe736
As requirement, concurrent mode, station 5G/2G scan need stop when AP
connected by peer station.
Condition:
STA + AP 5G (connected) + AP 2.4G skip 5G scan
STA + AP 5G (connected) skip 5G scan
STA + AP 2.4G (connected && 2.4G only) skip 2.4G scan
Others concurrency skip none
Add ini ch_list_trim_conc to enable/disable the feature. Default is
disabled.
Before send WMI_SCAN_CMD to firmware, call API
policy_mgr_scan_trim_chnls_for_connected_ap() to check if need
trim scan channel list. Which channel list need be trimmed
Change-Id: If4d1cf7347f757fb013ffcb4016e8e6f16859f42
CRs-Fixed: 3075068
- Add MLO Quiet IE related parameters in ml_bcn_partner_info structure.
- Populate MLO Quiet IE related parameters in the beacon template.
Change-Id: I5a4a069d067bdbc5e7c44c407f51a504e9aba151
CRs-Fixed: 3088019
Parse the per-STA profile IE and save the CSA, eCSA, Max Channel Switch
Time IE pointers in partner_link_info structure.
Change-Id: Icac75e3ad1f45bd5325c9144db7732684ebb4512
CRs-Fixed: 3087692
The two api have different result for country ie empty AP case
at present:
scm_is_bss_allowed_for_country : allow ap with empty country ie
reg_get_6g_power_type_for_ctry: disallow ap with empty count ie
Add check empty country IE in scm_is_bss_allowed_for_country
to align reg_get_6g_power_type_for_ctry.
Change-Id: I8c929bf0befa691f60861ceb8c63827cde400ae9
CRs-Fixed: 3093481
Enable the interrupt based processing in monitor mode
for WCN7850, by enabling MSI interrupts for rxdma
monitor destination ring.
Change-Id: Ia3c4456d28ed58c8ef49a7aa8e711076fbdf9415
CRs-Fixed: 3094129
At the point in an MLO Manager utility function where we process the
length of the Element ID Extension List in the Non-Inheritance
Information Element, rectify the decrement of the unparsed length so
that it is decremented by the length of the Element ID Extension List
rather than the length of the Element ID List.
CRs-Fixed: 3095660
Change-Id: If4913a47762bc96f26875a04da2880409353fb0e
Stats avg_rx_rate and last_snr for peer are updated in Rx PPDU
indication path. Logic for updation of these stats is incorrect.
Correct the computation of these stats.
Change-Id: I276d0d6c81d45818bf771c3c0565fe4bb259c49d
CRs-Fixed: 3091679
Presently, whenever there is any kind of reference leak in the system
wlan driver doesn't recover and goes into a bad state.
Add support to forcefully reset the vdev response timer so the system
can gracefully recover and wifi can be functional.
Change-Id: Iab705c17f4313e4b8efd980d5427bf8d4ce9496f
CRs-Fixed: 3051962
Multicast support for MLO
1. Following functions are newly added.
dp_rx_igmp_handler()
dp_tx_mlo_mcast_handler_be()
dp_rx_mlo_mcast_handler_be()
dp_mlo_get_mcast_primary_vdev()
Change-Id: If215f843369e6e2621ef302b924e524c86f0d30b
The current platforms support 4 pci slots, so increasing
WLAN_CFG_MAX_PCIE_GROUPS to 4 to have unique irq name
Change-Id: Ifca25ee075611c75a5fa5e56782835ad89d26f91
The existing logic is if STA and AP have different ctry code,
and STA is in ETSI, then it operates in VLP mode irrespective
of AP ctry.
New logic would be if AP ctry is US and if it advertises LPI
power type in HE ops IE via beacon, then STA can advance to
LPI mode.
Change-Id: Ifbee7052854277c3d21ccd21b65b79edb5e89f46
CRs-Fixed: 3084589
This API retrievs link address and link id of all partner links
in structure to the caller.
This change also includes few compile fixes for msgq mode
Change-Id: I2a30904a3b41876783de611ac14697338c617689
CRs-Fixed: 3091850
In WCN7850, the tlv header width is 64-bit and the tlv header
start is 8-byte aligned inside the monitor status ring desc.
Add changes to parse the monitor status ring TLV according
to the TLV header width.
Change-Id: I19860b871abbc3037174b9d0ae5ed6e52b1eb736
CRs-Fixed: 3084443
In WCN7850, there is only one common RXDMA dst ring for
both the mac.
Add changes to process the common RXDMA dst ring for
status TLVs corresponding to either MAC monitor status
ring. Also use arch ops to get rx_desc from sw_cookie.
Change-Id: Ia2c004755bc4389b587d995286093a519b995cab
CRs-Fixed: 3084442
WCN7850 has only one RXDMA DST ring, as opposed to other
lithium family chipsets, which had 2 RXDMA DST ring.
Refactor the code to pick the number of rxdma destination
rings from CFG context.
Change-Id: I20d475c02690043e969bc7a78605809b8c6814ae
CRs-Fixed: 3084440
This change adds debug prints in error cases to
print error and relevant info to understand issue.
Change-Id: Ie5670d535015f410e81bd5b06ce58046a02b19f0
CRs-Fixed: 3091155
In SAP mode, intrabss forwarding can happen when system
suspend is in progress. This could potentially result in
a scenario where SW2TCL HP update goes through after
WOW_ENABLE command is sent to FW.
Fix is to check for system PM states and do an explicit
system wakeup if tx packet gets enqueued to SW2TCL after
wow is enabled. Flush the SW2TCL HP on system resume.
Change-Id: I8dcd108b0dc1d703168f2f7a0ef0627e4dc0b103
CRs-Fixed: 3087727
Add 2 hal soc ops, hal_msdu_desc_info_set and
hal_mpdu_desc_info_se for berilliyum datapath.
Attach hal_rx_msdu_ext_desc_info_get_ptr_be to its function
pointer.
Get reo queue descriptor address as a 5 byte value as in
beryllium datapath it is being obtained from rx packet tlv.
Change-Id: Ia58597384e1a3d5eec493b865a88bab4f209502d
CRs-Fixed: 3084532
Use the tracepoints to trace delayed register write, ce
tasklet scheduling latency, tx, and rx packets.
Change-Id: I63a89276177a9d0466dcb0c831eeb8e938a2bf79
CRs-Fixed: 3081870
Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6490.
Change-Id: I6f6f47c87d40bd661162f764fb3a360230a56457
CRs-Fixed: 3086667
Currently is_assoc_link flag in cdp_peer_setup_info just means first
link peer during MLO connection, but usually assoc_link is the
link which initialize MLO association and it will be the primary_link.
this introduce confusion with another flag is_primary_link.
Change it to 'is_first_link' in cdp_peer_setup_info
Change-Id: I8d14da73e6a3bbc39a4a527d6c0aa5667255e995
CRs-Fixed: 3090270
Currently api wlan_reg_get_6g_ap_master_chan_list is declared
and defined under CONFIG_AFC_SUPPORT feature flag, since this is
a generic API and can be used by other functionalities as well.
With this change move wlan_reg_get_6g_ap_master_chan_list api
out of CONFIG_AFC_SUPPORT feature flag.
Change-Id: Ifa7b27895b4660bbf248fc2827472ba50c9df9a4
CRs-Fixed: 3090281
Add change to move mlo mast functionality under AP mode check as it is
specific to SAP mode only.
Change-Id: Ib5254873331a095f69638137e46697d8de352a2f
CRs-Fixed: 3092320
Add interface for sending mlo link set active cmd and
register the response handler.
Change-Id: Icd7cf3294cddec1aa4a417e29a22fcd6fbea0dfb
CRs-Fixed: 3036846
The sub-channel array size was maximum of 8 sub-channels corresponding
to a maximum channel width of 160MHz. But with the introduction of 11be
higher channel width of 320MHz is possible.
Expand the size of sub-channel array to 16 to accommodate the sub-channels
of 320MHz in case of 11be chipsets.
Change-Id: I7ffd1a7c0f05085edff74b92e47ab5a0dab42ef0
CRs-Fixed: 3068405
Remove Union between link_num and vdev_bitmap as
it is possible send vdev_bitmap along with link_num
for forcemode MLO_LINK_FORCE_MODE_ACTIVE_NUM and
MLO_LINK_FORCE_MODE_INACTIVE_NUM.
Change-Id: Ie15c5f20d7990baebee50bdc7a37734331eb891c
CRs-Fixed: 3090334
When accessing the copied connect request, concurrent accesses may
arise. This could cause a double free in certain scenarios. Add locks to
any write access so there is no unexpected behavior.
Change-Id: I011b8980d5756d7105704449af2dba6df1f23a8d
CRs-fixed: 3070966
Define tracepoints for TCP, UDP, and other packets in
tx and rx. Also, define some miscellaneous to capture
delayed reg write and CE scheduling latency.
Change-Id: I1eafad7e367073060d742d7bf4ca3245d75cc25d
CRs-Fixed: 3080977
Add support for wlan specific tracepoints using
the existing tracepoint infrastructure exposed
by kernel.
Change-Id: I9e4d09443b97124252240cb6b9ee305acb1bf677
CRs-Fixed: 3077074
In flow control code switch logic break statements are not used
intentionally, but compiler is treating this as error.
So to avoid compilation error add fall through comment.
Change-Id: Ic79b75c48554182fba7c4c0f3885e3a44347e2e7
CRs-Fixed: 3090182
