sw_exception bit will be marked in reo dest ring descriptor for
FW re-injected frame, get this bit and save it in skb->cb,
this bit value can be used for FISA further check.
there is no reo_dest_indication field in reo dest ring on beryllium,
so share same cb member for sw_exception and reo_dest_indication.
Change-Id: I2321121be7dda68ed19faca177d868c7e8ba1dbf
CRs-Fixed: 3056156
2 threads blocked to wait channel_switch_complete_evt for SAP channel
switch is already in progress, qdf_event_set only woke up 1st thread
later, 2nd thread still kept blocked with hold net_dev for debug id
NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP, leak happened.
Change-Id: Ib76318dd4a613ca1852a56b7701a04385b69ba56
CRs-Fixed: 3061976
Define QDF API for virtual memory allocation and free.
Also add new api to get time of the day in microseconds.
Change-Id: I2921055bbb6b5d2a1105d19448b2a10fa2d6ccc5
CRs-Fixed: 3038180
QDF_CLEAR_PARAM failed to clear bit at bit position
of "val". Correct to ((__param) &= (~(1 << (__val)))).
Change-Id: I974874a8af79253564bfa5d45495a646f9a0ee86
CRs-Fixed: 3038983
Dump flow pool stats even for low verbosity level as
part of periodic stats display.
Change-Id: Iea59d20b0a81cfd0bfdac65ad54a11fa33f30f2f
CRs-Fixed: 3031168
Add QDF API to get the first node of a linked list. If the
list is empty this API returns NULL.
Change-Id: I4569941f708634085904fd30a347facca543594a
CRs-Fixed: 3029987
There is a requirement to get sequence number and tid for tx
data packets in packet capture mode. These fields are not
received as part of WBM tx completion, but are obtained from
FW in ppdu stats. As WBM tx completion and FW ppdu stats are
two different events, the ppdu_stats of previously sent ppdu
are filled in the radiotap header of current tx ppdu in packet
capture mode.
Enhance code to add required fields such as ppdu_id of tx current
ppdu and ppdu_id, tid, start_seq, ba_bitmap of previously sent ppdu
as extension2 to radiotap header. These fields will be added in
radiotap header only when add_rtap_ext2 is set.
Change-Id: I448a9c03a770b61ab802d855bc5f1a6587bd01b3
CRs-Fixed: 3004472
In order to support flow overide feature,
AST table has to be split between RxPCU and DDR.
With this split, RX monitor cannot make use of
ast_index to fetch peer as it is not from DDR.
So make use of sw_peer_id to fetch peer.
This sw_peer_id is derived from RX_MPDU_STAT_START_TLV
Change-Id: Ib2a003a2640fded3287c318d2ad59fd3127af9b6
CRs-fixed: 3004363
Tx data transfer in host mode with nbuf map_unmap debug frmwk
enabled and enhanced stats disabled results in an assert.
This is because on Tx completion path, nbuf unmap is done using API
qdf_mem_unmap_nbytes_single which takes physical address of nbuf
for unmap and does not remove nbuf from map_unmap tracking list and
when nbuf is freed, it results in assert as the tracking list still
contains that nbuf entry.
In order to fix this, define a new API for nbuf unmap passing physical
and virtual address of nbuf as arguments. Physical address is passed
as an argument in order to avoid cache miss in per packet path which
eventually helps in improving the KPI.
Change-Id: I77ab6ac3ac98556b9caff8aa3ee82bc23cd26de7
CRs-Fixed: 3006671
IPA and rx_err ring are processed in same CPU resulting
in low Tput.
To fix this, not allow processing of rx_err ring in
CPU 0
Change-Id: Id53a03c9290607beb1a595c84bfb0fd8d9f5d105
CRs-Fixed: 2949569
There are instances in the code where the response is sent from the
driver to the supplicant indicating the allocation flags which is
used by the supplicant to allocate memory.
In those situations, we should pass the allocation flags based on
the context in which the response is sent.
Send the response with the right allocation flags to the supplicant.
Change-Id: I85f1c29fc66ba51a9f9c645692712c3a25b7fed1
CRs-Fixed: 2987552
Add a new component for MBSS framework in object manager.
Add a new trace module for the new MBSS component framework.
Change-Id: I7ef3559d90a6bc7f558e3994a1a91f09985d90e9
CRs-Fixed: 2958764
Add a separate module ID for Multi Link Operation (MLO) Information
Element protocol processing related QDF trace prints. These are for
use in processing of any IEs related to MLO. This would help separate
the tracing of MLO IE operations which are expected to be substantial,
and avoid confusion that might arise from reuse of MLO manager
tracing.
Change-Id: If55532a89452b6432101be07fcc6aff45045e822
CRs-Fixed: 2985731
Add support to log ICMP seq no and ID in DPTRACE.
Other protcols can use this private proto data to record
there private data accordingly. Currently it is set to 0.
Increase the record entry from 40 bytes to 50 bytes.
Change-Id: Ief5fb26a97408a364af486f3eaec2e108de71d52
CRs-Fixed: 2951916
There is a time involved between the smmu fault initiated
and the eventual system panic. In this time there is a
possibility of the nbuf history being overwritten losing
the information on the nbuf which might has actually caused
the SMMU fault.
Set the ssmu state and dont track the nbuf's when the smmu
fault is detected.
Change-Id: I579da332766618161567764656005ef13667270e
CRs-Fixed: 2960070
Currently dp_rx_err_process expects ring descriptor to be only
LINK_DESC_TYPE. In certain cases BUF_ADDR_TYPE ring descriptor is
observed in reo_exception ring. Add logic to handle the same.
Change-Id: I5baecc3f8eafc0830672b91bc9d9607b568a6cda
CRs-Fixed: 2954653
Depreciated IPA APIs are currently getting compiled.
To fix this, adding linux kernel version check
Change-Id: I2288db34c09d60047c67a5df9081de08a6c2f62b
CRs-Fixed: 2927413
Read the file wifi_module_param.ini, in which wifi module params
are present and compare these module params with qdf module params
in qdf module init function.
If any of the module params belongs to qdf module is present,
then that particular module param is updted during qdf module init.
Change-Id: I76ef876f6c7be3cdffd93b6050a190438d60bf39
This feature is used to detect CE tasklet scheduling delay
and credit response delay issues.
Change-Id: I9a8fcb425edd5cf96fae5f6cd3bfc7f51172c814
CRs-Fixed: 2874874
Add QDF infra for minidump feature and define the
minidump_log and minidump_remove functions.
Change-Id: I875b991b7a7d9295f8b2acd95a7551a747ec962c
CRs-Fixed: 2856193
Currently the return type of qdf_queue_work is void,
whereas queue_work return type is bool denoting the status,
so changing the return type of qdf_queue_work to bool,
helps to check the status of the function.
Change-Id: Ifd07923a18641790314b88d38a7eba2a73e498b3
CRs-Fixed: 2876197
Function qdf_debugfs_create_entry's last parameter should be
qdf_file_ops_t, not qdf_file_ops_t *.
Change-Id: I847a05b81944562808c29a42b176c822639509ba
CRs-Fixed: 2864863
1 Add protection for wrap around of jiffies.
2 fix assign issue from uint32_t to uint64_t.
Change-Id: Idbd3604d0cb985d08aa82e3b1d7f32fa6be8c3ef
CRs-Fixed: 2864737
The qdf_in_interrupt API was defined in the internal
Linux util file.
Move the API from internal to qdf_util.h and provide
the appropriate abstraction
CRs-Fixed: 2853590
Change-Id: I512155776275684223c1901d789853d2529fcc83
Use non-inline OS-abstraction APIs to avoid OS APIs usage directly in
driver.
Add new non-inline OS-abstraction APIs.
CRs-Fixed: 2742480
Change-Id: I177b41d69ca8f102fa67316d8901b6991dea3203
The prints from the driver are rate limited based on the
configurations provided.
Also the prints which are redirected to user space daemon
and of certain log levels are also printed on the console.
Add a rate limiting version of the API for the prints coming
to console via the logging daemon.
CRs-Fixed: 2853590
Change-Id: I9683172ac0665b46581bad13a1050c6d70d72b5c
