STA_ENTRY_TDLS_PEER is defined under feature flag FEATURE_WLAN_TDLS.
With FEATURE_WLAN_TDLS=n, compiler throws use of undeclared identifier
'STA_ENTRY_TDLS_PEER'.
Hence fix the error in wma_he.c:1276 introduced in change
I16073a51a8949093872f7a421e0ad01648b63e92.
Change-Id: I0038dad70147b5c4ded2abad34baf50c8bc32f83
CRs-Fixed: 3275175
EHT IEs such as EHT caps and EHT ops are missing from
the beacon data buffer. Add a new API to append these
IEs to the buffer. Also, add support in the driver to
populate wiphy EHT caps with SU Tx beamform parameters.
Change-Id: Ia7640602410ba6802eb017bf763707f84e6e7c83
CRs-Fixed: 3325336
Correct bad misspelling of IE decriptor_element to
descriptor_element in frame parser file and subsequently
dot11f source and header files and the parser API file.
Change-Id: I0aedb44ffdb9a407721bfe5f30ce23cd40efcbf1
CRs-Fixed: 3314908
Update CFG_DISCONNECT_ROAM_TRIGGER_MIN_RSSI INI min, max
and default values under macro
Change-Id: I9973a032d16c5d8aedb4ad77833b9124de719e86
CRs-Fixed: 3314826
Parse new nudge attribute to support flexible TWT.
This attribute is optional and will override wake
duration attribute if provided.
Change-Id: I16bbd5e4c78e5471cdccad4ebe43049d4f85e829
CRs-Fixed: 3265813
policy_mgr_get_nondfs_preferred_channel() return a non-DFS channel
with channel bw 20 MHz, but if the original SAP bw is 160 MHz and
channel is on 5 GHz, it always has DFS bonding channel.
So reduce channel bw if detect the bonding channel is DFS channel.
It can make STA connect to 5 GHz ref-AP even SAP is on 5 GHz channel
with 160 MHz bw.
Change-Id: I842d9dfb1070b900e52841b4ec5372af8550ad8e
CRs-Fixed: 3318696
Consider the bw passed by supplicant/hostapd for P2P Go
starting on 6 GHz band.
Only Overwrite the bw when the P2P Go interface is coming
up on 5 GHz band (80 MHz) and for 2.4 GHz band (based on channel
bonding).
Change-Id: I628bd1e4008f811e6f8d72508a33527bbe8cf762
CRs-Fixed: 3324343
Replace all occurrences of
wlan_reg_set_channel_params_for_freq API with new API
wlan_reg_set_channel_params_for_pwrmode.
Change-Id: I7ae94a7004803a96caeb7a77d03065096afe5f0e
CRs-Fixed: 3144793
Firmware may send two consecutive roam sync frame indications when
it supports MLO roaming. The first event carries link beacon and
second event carries assoc beacon. This is to let host driver have
both the link scan results if host has to take care of link
connect(e.g. OWE MLO roaming, EAP MLO roaming,.. ).
If host driver doesn't have support/doesn't need link beacon,
it would be overwritten by assoc beacon(e.g. wpa2 MLO roaming,
SAE MLO roaming, ..).
This results in a memleak as the previous cached beacon is
not freed(vdev->rso_cfg->roam_sync_frame_ind->bcn_probe_rsp).
Free the existing beacon if new one is received. Also, remove the
current free's from extract_roam_sync_frame_event_tlv() which
doesn't need any such freeing as the copy always happens to a
freshly allocated buffer.
Change-Id: If3b4d6e4b8e1e2af5306171ad7eda28e744da64e
CRs-Fixed: 3322094
In function hdd_softap_deauth_all_sta, if sta's mac address
is broadcast address, it does not need to invoke function
hdd_softap_deauth_current_sta.
Change-Id: If3d19a8f6f91cb3568c2c20c8cf3a171772d571e
CRs-Fixed: 3320047
Page fault reproted when all tdls peer list size exceed their max
size. So, add the change to avoid this issue.
Change-Id: I66b5f85c8cdc98491b33b2100a55f424d5531ca0
CRs-Fixed: 3321105
The feature raises a pulses at specified interval in TSF time domain.
The pulses can be used to determine driver level latency between hosts
as they are operating in same TSF time domain.
Add ini "g_tsf_accuracy_configs" to configure parameters for TSF accuracy
feature to customize GPIO pins and interval.
Change-Id: I49609d5beba8043ac2ecc086e97b01d1e0b2d3f6
CRs-Fixed: 3277992
Change "psoc" to "psoc_priv" in documentation of
wlan_action_oui_cleanup.
Correct documentation of API name for action_oui_psoc_enable.
Change-Id: I9e3adbf69ca40967f2680114f4c7f1bb22c391a1
CRs-Fixed: 3323128
After roaming to new AP, session->lim_join_req isn't filled,
can't be used without check.
Change-Id: Ib89b22ea38927c2c544d96f6c9ce0aca67bcc3bd
CRs-Fixed: 3321909
Linux kernel will shut down all interfaces if it fails
to resume WLAN, considering the firmware crash case in
system suspended state, the interfaces are left in down
state after recovery, which is different from the other
recovery cases, and it doesn't make sense.
To avoid it, return success for system resume request
if recovery is in progress.
Change-Id: I888f4702a10a72e5989bc0e867832b3ce72eec24
CRs-Fixed: 3322055
If host ini gDot11Mode set to lower dot11mode which doesn't
support 802.11be, override the target en_11be flag to false.
Change-Id: If11928f2a662e45ff310ae9bbd3866dbc1ed4b7d
CRs-Fixed: 3319707
AP can advertise more than two TID to Link mapping IEs in
the beacon or probe response.
Change is to update the t2lm IE as an array of value two.
Change-Id: I2c2f770b7047bb490dd557dec28caf056ede978e
CRs-Fixed: 3319268
Enable the feature to drop the packets which are
arriving from PMAC on which monitor vdev is not running.
Change-Id: I2a5056f40e961102d01b5776577bd11a551a780d
CRs-Fixed: 3319409
The following change introduced new misspellings into
wlan_cfg80211_tdls.c, so fix them.
- Change-Id I3a1a05961bb5e747d946ffa8314319f898ef7b97
qcacld-3.0: Link params embedded in station param struct
Change-Id: Idf4f214f5e9e4656b241f8de015fc49d64fc4852
CRs-Fixed: 3319365
AP advertises TPE IE Tx power as 8-bit unsigned int. STA
needs to convert it into an 8-bit 2s complement signed
integer in the range –64 dBm to 63 dBm with a 0.5 dB step.
Thus, halve the tx power received from AP's TPE IE.
Change-Id: Ibd3227a2f11f230b164af3c65a65f5e61879e25d
CRs-Fixed: 3313617
Add ini support to configure traffic shaping for COEX
i.e. coex_tput_shaping_enable.Host sends this INI to
Firmware via WMI_COEX_CONFIG_ENABLE_TPUT_SHAPING.
Based on this enabled value, FW will do power save with AP
when BT page scan is enabled.
The default behaviour is to do a free run without notifying
a power save to the AP during the BT Page scan.
Change-Id: I4934c98911b66c7c834899ad7cdc72063e9c5153
CRs-Fixed: 3066980
The following change introduced a new misspelling of "disable", so fix
it.
- Change-Id Ie98a1b8681f41f3a63523ac40b5cfb688a7b0cb0
qcacld-3.0: Handle VENDOR_SUBCMD_SR and operation
Change-Id: I7a06c24cf732b12072377835f01bd50aa5785062
CRs-Fixed: 3319368
The following change introduced a misspelling of "threshold", so fix
it.
- Change-Id Ie98a1b8681f41f3a63523ac40b5cfb688a7b0cb0
qcacld-3.0: Handle VENDOR_SUBCMD_SR and operation
Change-Id: I255ef45d9978ce777a41564f0d05e6d99efe5a4b
CRs-Fixed: 3319363
Add beacon_rx log as part of iface stats handling to know number
of beacons received during previous stats.
Change-Id: I90d30f354d879497ee5ae0f0f320efbcbb1741ab
CRs-Fixed: 3320914
Firmware handles all NAN concurrencies in the platforms which
don't advertise the WMI service cabability
WMI_SERVICE_NAN_DISABLE_SUPPORT. Host takes care of the NAN
concurrency if the capability is advertised by firmware.
But there can be some legacy targets where firmware wants to
offload NAN+TDLS concurrency alone to the host and it takes care
of rest of the concurrencies. This is to make NAN of higher
priority and disable TDLS when NAN is active. Currently, TDLS is
of more priority than NAN and it can't change the order as it
can't disable TDLS to change the priority.
Currently, driver doesn't parse the NAN messages(even NAN enable
request) in such platforms. Parse the NAN messages and disable
TDLS upon NAN enable request. Rely on NAN state machine to
allow/disallow new TDLS requests. This needs NAN enable status.
Change-Id: Ie9c7c1cc2f1ed6328a31b93077c2928940fc3450
CRs-Fixed: 3263730
