To support IPA TX two pipes, WBM2SW4 is added as second WBM2IPA TX
transfer ring.
Change-Id: Id0762003c1d91e3614b15df2bc51f90e27add43c
CRs-Fixed: 2750073
Refill pool buffer IPA mapping is done during allocation time,
but in some cases where IPA pipes enable/disable happens in between
previous mapping is not valid which is causing SMMU fault from IPA module.
Fix this by moving IPA mapping before replenishing buffers to RXDMA ring.
Change-Id: Ie6c5eb791b6f832f311a6e89489aebef37094d8f
CRS-Fixed: 2901819
The firmware sends new reason codes to indicate TWT teardown due to
single channel and multi channel concurrency. Update the enum
qca_wlan_vendor_twt_status to represent new reason code.
Change-Id: I49b35ca9570a4faf73f6c93eb957c357576efd1e
CRs-Fixed: 2904365
Rx desc alloc failures foes not really reflect rx packet errors.
So rx desc alloc failures shall not be counted as packet errors
Change-Id: I85ed478bbb3af24ff680a338aca86d3b4548ad8d
Change the get_target_if_spectral_handle_from_pdev() api to
non-inline for code size reduction.
CRs-Fixed: 2896467
Change-Id: Icb92643a9c0d85a1b4328cd0c516d6d771877a4f
In qdf_nbuf_unshare_debug() API remove the refernce of old nbuf
before calling skb_unshare(). As skb_unshare() will free old nbuf
and allocate a new one for a cloned skb.
Change-Id: I2a2f0277934268a346e13a0779e204f02c9bcf5b
Adding lock for dp_txrx_ppdu_stats_handler given
that insertion and deletion happen in different cores.
Change-Id: Ic0102d615f02cbfed70acc1114a314426466638e
The minidump API msm_minidump_remove_region() was added to the
msm-kernel from version 4.19 so, to avoid compilation failures in
older kernel versions, enable the feature flag WLAN_QCOM_MINIDUMP
for kernel beginnig with 4.19 version.
Change-Id: Iba7a293fb9ca3e5ffe967e8d610251df8c2a3969
CRs-Fixed: 2901746
The bridge forwards the multicast packets to all the
interfaces attached the bridge.
When the STA network interface receives such packets
from bridge and send it to the AP, it is echoed back
from the BSS.
These packets are not intended for the bridge as it
will lead to looping.
Add a check to detect and drop such packets when
received back from the BSS.
Refactor dp_rx_mcast_echo_check function to fix
compilation errors from the above change.
CRs-Fixed: 2894272
Change-Id: I3f9e92c3598af11d3ff4e6b9b8afbc4110a926fc
Add support to update CE srngs HP/TP in delayed manner
for QCA6750 target. This avoids busy wait in register update.
Change-Id: Id825a6fdf709187765ff823cb3015db21a024af3
CRs-Fixed: 2894094
Add APIs to support customer scan filter and candidate list
sorting based on user perference
Change-Id: I9b5d46c7851a0afd4513f50c50c43baf26c29d0c
CRs-Fixed: 2896741
target_if_dump_fft_report_gen3() function doesn't check if the FFT report
is present in the Spectral report. Add the report mode 0 check to avoid
printing FFT report when it is not there.
Change-Id: Ia825cd7927ec7ffa41473649d381c717b0ef26c9
CRs-Fixed: 2898904
This feature is used to detect CE tasklet scheduling delay
and credit response delay issues.
Change-Id: I9a8fcb425edd5cf96fae5f6cd3bfc7f51172c814
CRs-Fixed: 2874874
When START cmd is activated in scheduler context, due to system load
the scheduler may not process the START cmd time for certain time.
During which if VDEV is checked for INIT state, we proceed to
further operation and return.
Now, start cmd in scheduler will be processed, which will try to bring
up the VDEV leading to undefined issue.
To fix this
1. When we are waiting on VDEV to move to INIT state, we should also wait
until START cmd is removed from serialization active queue.
2.With this we ensure that START cmd processing is completed in the
scheduler context as well as make sure that STOP moves from pending to
active and moves the VDEV SM to INIT state.
Change-Id: I51d0a695cd8c0a8b54e74226e04f9cd32ce58e4f
CRs-Fixed: 2894578
Rx refill lock is not in sync during deinit path causing
mem leak of refill buffers. Set the Rx refill lock during deinit path.
Change-Id: Ic7d07c0fcaae26f6a269afcba4d593be1d5eacad
CRs-Fixed: 2898006
Change-Id: I483b74ee86ef648b9e75251097c33a18f9e0f884
* /local/mnt/workspace/dharilak/git_history/src/qca-wifi-oss: (1722 commits)
Move files dp_txrx_wds.c/.h with history from qca-wifi-oss to CMN project
qca-wifi: Filter to add AP channel report based on opclass
qca-wifi: Handle memory leak and LOCK in dfs_precac
qca-wifi: Add a dispatcher for reg_is_chan_disabled
qca-wifi: TxCapture: Protect access to defer_msdu_q
qca-wifi: Do not add 80MHz non DFS channels in precaclist
qca-wifi: add fix for last set bit to update ba size
qca-wifi: Move dfs_set_nol back to common code
qca-wifi: fix on ppdu_info mem error
qca-wifi: Add definitons for resource profile APIs
qca-wifi: Command to configure max auth failure packets
qca-wifi: Add lock for EXTAP table
qca-wifi: Remove IEEE80211_PARAM_EXT_IFACEUP_ACS
qca-wifi: Add command to configure scheduler watchdog timeout
qca-wifi: filter out frames with tlv miss
qca-wifi: Add new WDI event index for tx capture
qca-wifi-oss : Start RCAC on 80MHz for 160MHz current operating width
qca-wifi: update sequence number only on valid
qca-wifi: fix update bitmap for end of window
qca-wifi: TxCapture: Fix OOB access of tid array
...
Enable lower 6G edge channel ch2 (5935MHz) for APL2 6G regdmn
using a service bit WMI_SERVICE_ENABLE_LOWER_6G_EDGE_CH_SUPP,
which is not enabled by default.
Also, disable upper 6G edge channel (7115MHz) using another
service bit WMI_SERVICE_DISABLE_UPPER_6G_EDGE_CH_SUPP, that
is enabled by default.
Change-Id: Ia7cb7f7d3165375178adbe70adb19b8671496b6d
CRs-Fixed: 2885623
There is an API to get the scan aging time,
but there in no API to set the scan aging time
and can be configured through INI.
Add API to set the scan aging time run time.
CRs-Fixed: 2894428
Change-Id: Ide2b2eec780dd7ff07ebd783b0916a68c0e94a2c
Free crypto keys on connect active instead of disconnect complete,
to avoid race between south bound disconnect, leading to key free and
set key req from supplicant using the same key.
Change-Id: Idae5100d255b4df6b84425114cb66fa8d3b504e0
CRs-Fixed: 2897247
For MLO SAP, it can't generate beacon template until all the vdevs
start. To synchronize MLO vdevs start, we add two new substates
WLAN_VDEV_SS_MLO_SYNC_WAIT and WLAN_VDEV_SS_UP_ACTIVE whose parent
state is WLAN_VDEV_S_UP.
Once vdev gets vdev start rsp, notify MLO mgr, who checks whether all
vdevs are active, if so, trigger WLAN_VDEV_SM_EV_MLO_SYNC_COMPLETE for
the vdev which is in WLAN_VDEV_SS_MLO_SYNC_WAIT state.
After vdev translates to WLAN_VDEV_S_UP, MLO SAP will translate to
WLAN_VDEV_SS_MLO_SYNC_WAIT, while the other vdev will translate to
WLAN_VDEV_SS_UP_ACTIVE.
MLO sap will notify MLO mgr once it is in WLAN_VDEV_SS_MLO_SYNC_WAIT.
Then MLO mgr checks whether all the vdevs are active, if so, trigger
WLAN_VDEV_SM_EV_MLO_SYNC_COMPLETE for the vdev which is in
WLAN_VDEV_SS_MLO_SYNC_WAIT state.
If MLO SAP receives WLAN_VDEV_SM_EV_MLO_SYNC_COMPLETE in
WLAN_VDEV_SS_MLO_SYNC_WAIT state, it translates to WLAN_VDEV_SS_UP_ACTIVE
Change-Id: I8be9c02f62719dbdcf4af79d83173c316c64b765
CRs-Fixed: 2866103
In order to support different power levels of 6G AP and client,
the channel list event from FW namely "REG_CHAN_LIST_CC_EVENTID"
is modified to add few parameters specific to 6GHZ devices.
Hence the existing event is replaced by REG_CHAN_LIST_CC_EVENT_EXT for
all 2G/5G/6G pdevs in FW. Therefore, after the service ready event, FW
sends the channel list for the configured country/regdomain via
REG_CHAN_LIST_CC_EVENT_EXT. This mandates that all host software need
to have the processing capability of REG_CHAN_LIST_CC_EVENT_EXT to bring
up the AP.
As there can be host software which has not yet implemented the
version of "REG_CHAN_LIST_CC_EVENT_EXT", backward compatibility is lost
if "ONLY REG_CHAN_LIST_CC_EVENT_EXT" is sent by FW.
Hence a 3 way handshake between host and FW is established.
1. FW advertises its capability of processing REG_CHAN_LIST_CC_EVENT_EXT
id via wmi service bit 'wmi_service_reg_cc_ext_event_support'.
2. If the host is capable of processing the "REG_CHAN_LIST_CC_EVENT_EXT"
event id (which is done based on registration of this event), host
sends the capability in WMI_INIT_CMDID setting a bit in host_service_flags.
3. Based on host capability advertised in WMI_INIT_CMDID, FW decides to
send the old event ("REG_CHAN_LIST_CC_EVENTID") or the new event
("REG_CHAN_LIST_CC_EVENT_EXT").
4. If there is no flag indicated by host to FW in WMI_INIT_CMDID, FW
by default sends the old event ("REG_CHAN_LIST_CC_EVENTID").
CRs-Fixed: 2876360
Change-Id: Ibe95f414ad9fff0e5641bcc6e60450ef9afe245b
- Remove wlan_reg_set_channel_params and the callers
associated code.
- Clean up part of CONFIG_CHAN_NUM_API functions.
Change-Id: If9583e674752d6f47de8d7d6bc946909509957b5
CRs-Fixed: 2883773
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. It is recommended to disable
EXT grp irqs and drain TXRX before sending power save enter command
to the FW. This will ensure that no interrupts are received while
in power save mode and as a result there wont be any HP/TP updates.
Change-Id: Ibf952bbc2c6d13fb3e4ca6b4845bc9cc887fa694
CRs-Fixed: 2883135
As chan num may be same for different bands, getting chan enum
from channel number can provide incorrect results.
Use wlan_reg_get_chan_enum_for_freq API to get chan enum instead
of the wlan_reg_get_chan_enum.
Change-Id: Ibf08bba31e3778cb4857612d2c95813558be5bc9
CRs-Fixed: 2885860
Update default values of INI items to most commonly used values
in WCNSS_qcom_cfg.ini file on commercial devices.
Change-Id: Ie3a4ce2cbf4bc2352d5ebc5be939a47818a6d594
CRs-Fixed: 2874759
Add wbm head/tail pointer stats to dp_txrx_stats and ring
usage percentage for all SRC and DST rings.
Stats added to the following cmd: iwpriv wlan0 txrx_stats 26 0
CRs-Fixed: 2865996
Change-Id: I7d144d87c5f3485ec9ba85f50b036b69a64e53c6
For the minidump feature, the wlan_minidump_remove function
definition is modified. So, update the function parameters
accordingly at all instances of the wlan_minidump_remove function.
Change-Id: I5a346f6cdf423ece02fb08d68e4422251af54876
CRs-Fixed: 2860435
