This change avoids msm property install and cache state
transitions if sys cache is not supported in the target.
Change-Id: I00b0a95772b1a3dab67c7e684529cda093d6dac6
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Return early if the active streams are not present. Clean function
doesn't take into account the count of active stream which is being
changed during disable and link clk is turned off before that.
Adding active stream check in pre_off will ensures atleast one
stream is on and link clk is not turned off.
Change-Id: I6abf4b14ae4f99161eed3d5300b1961a1983977d
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
Add changes to update min_prefill_lines to 40 for
inline rotation use-cases on lito and lagoon targets.
Change-Id: I1d6ba877972e31a8f950d98ebab8944e1b93cef0
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
icc_set_bw api requires ib, ab votes to be in KBps.
The votes received from the userspace will be in the order
of Bps. This change makes the conversion from Bytes to
KiloBytes before applying vote on interconnect path.
Change-Id: I1c02e91be91bda7dcbfe058f3681034a12aedbc5
Signed-off-by: Mahadevan <mahap@codeaurora.org>
In some targets with offline rotator, ubwc might not be
supported. For those cases, this change adds ubwc
verification for plane during atomic check to prevent
crash.
Change-Id: Ie24a7ba823773204062993996746aa08171fe90f
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
MDSS irq will be enabled/disabled only during post-enable
and pre-disable power events. During idle usecase in video
mode, interrupts will be disabled but not mdss hw irq.
This change uses irq vote count check while adding pm
qos irq vote.
Change-Id: Iae0ea19fbe688d0ee762b5e75f37548ba5671def
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
During virt enable call, sde_enc master will be removed and
re-assigned. If an underrun is observed during this
scenario, it results in crash due to uninitialized access.
This change handles the above scenario.
Change-Id: Iec9e4a0bc4b763e44933334dacf82f1439eacc17
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
The splash memory initialized by the bootloader needs
to be released after the first frame update. Add
memblock_free() call to release this memory that was
reserved during the kernel boot.
Change-Id: I2633305528b1767b87273d027b8a939da0cedfc4
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Added sysfs entry on crtc to notify a retire frame event
which indicates start of new frame. It is added at same
time of signaling retire fence.
Change-Id: Ie60aae96bd6e6bfb3cfe9db482cb59053f22383f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Modify the size of SID's passed as an argument during
scm call as per client requirement.
Change-Id: I84bbd1e034ba6dcd8ded1ddf3913a735a2139663
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
The change adds a new mode property allowed_mode_switch. The new
property is a 32bit bitmask that indicates the modes each mode
can switch to. This change is required to pass the driver mode
switching capabilities, so that user mode can reject any mode switch
that is not supported by the driver.
Change-Id: I76d1733a07a6d57487ba9f461055270d7e60e060
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Currently driver reads CTL status register before checking
pending kickoff counter. This can lead to a register access
violation when there is a race condition between the ESD and
commit thread.
This change checks pending kickoff counter before reading
CTL status register.
Change-Id: I5828b580c16d075df19eb349ee88d8b7da47941e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change disables sending idle notification if system
cache is already enabled. If system cache is enabled it
establishes that driver has already send prior
notification and no configuration change was requested.
Change-Id: I1aee002ab3c8c3d4193a8e7a4890d8e4f24da804
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change fixes the vblank wait after system cache read mode
update. Without this change the wait does not happen since there is
no pending kickoff. This change uses encoder api to flush the
configuration and explicitly waits for vblank.
Change-Id: I8942f9b638e784c8fd9b5df33a9ccc7087a5eaef
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Clone WB encoder disable before posted start commit
trigger adds wb_wait delay in current frame trigger
sequence. This adds 1 frame jank if CWB enable/disable
path exercised periodically like 100ms or 200ms. This
change delays CWB encoder disable after frame trigger
and vsync/wr_ptr wait to avoid jank issue.
Change-Id: Ifa10042473397b37396d217d2410e7cf5a1e32a1
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
DRM encoder can be NULL during modeset concurrency, so add this
change to check drm encoder and only wake up display when drm encoder
is available.
Change-Id: I50dd85eb39567aba4895dc19801020d7ead841b8
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Add event to event_list after msm_register_event is successful to avoid
use-after-free vulnerability.
Change-Id: I144ae82c657c1e2cf16608c0e8768b12a7d27974
Signed-off-by: Ping Li <pingli@codeaurora.org>
All sde crtc's are virtual when they are created. Resources for the crtc
is allocated when crtc is enabled. All crtc's will not have same
capabilities because some of the dspp blocks have additional hardware
blocks. Change exposes additional dspp capabilities dynamically when
crtc is allocated the dspp hardware block.
Change-Id: I93e76a1335574e4ca30d9419ef6cc6e8149e2c3c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
This change updates misr checks so that misr can be
configured during secure display session. In the current
code, misr_reconfigure flag is set only when accessing
through debugfs node.
Change-Id: Ic3a8316a4881551da3f0f340f6ef5ae3fbe4913f
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Enhance logging in dp mst functions by adding connector ids to
better identify operations for different streams and add more
trace logs.
Change-Id: Iaf5c67105c7af82fc5118674ddde5aef2319a611
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
During cases where vblank callback registration happens during
CWB is enabled and deregistered at point of no CWB, WB encoder
is left with dangling vblank_cb. Added changes to avoid registering
vblank callback on the clone mode encoder.
Change-Id: I62aa12ef453166d2f5558852d924f87841872f37
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Allow for overriding color processing features that normally uses
DSPP flush to use LM flush instead. This is required on targets
where some of the DSPP features have been tied to LM flush bits.
This changes adds a field in color processing node to track if the
override is needed and enables LM flush override for rounded corner
on target requiring it.
Change-Id: I584bd7b20dfc9fc7795b1b3b10e2f17a82945ce4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Trusted VM adapts splash handoff path to acquire the same
set of HW blocks the tui display was using in the primary VM
before switching out.
To use the splash handoff path, Trusted VM should add an
additional vote to the PM so that refcounts will be remain
balanced after the splash path cleanup at the completion
of the first valid commit.
This change adds the needed vote and as a result cleans up
explicit voting from trusted vm commit paths.
Change-Id: I9eb33c364f1dfb4205547a8353f57b73c68b8af3
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
When resuming the video session from a source initiated power down, the
dp_display driver is doing a link probe again to override the previous
link information parameters. The link_probe is not accurately capturing
all the sink capabilities resulting in the link getting trained at a
different rate when resuming from a PM suspend or a secure display
session. The HBR3 support is indicated in the extended capabilities
DPCD registers which is not considered in the upstream link probe
implementation.
This change will remove the drm_dp_link_probe function from the DP
driver because it is not capturing the accurate DP sink capabilities.
Change-Id: I3c225cf825c826edd73592b18fae74c8b5b8236c
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds porch calculation support to maintain
constant fps during clock switch for dual DSI controller.
Change-Id: I9a7e6d1f6d028355dba30aafe0234fc30c153059
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Sometimes committed state doesn't contain any crtcs. For example,
fbdev emulation is still pushing null commits to DRM even if the
cable has been plugged out. Avoid flooding the logs in this case.
Change-Id: I6b7f049b80409c4a2ae057839ede6dd8af10d03b
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
