dsi_display_init has to be called after dsi_display has valid
device info, so initialize it before calling request_firmware
in dsi firmware case.
Change-Id: Iec59882c776eb4bd19ce68d3ded052629c344d17
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds support to keep display reset pin high during
suspend state.
Change-Id: I8fab43d8f7b30fce72cc95277d016b72b914aa99
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Currently, for Dual DSI Broadcast command, Overflow error
is masked only for master controller. This changes add
support to mask overflow error for slave controller as well.
Change-Id: Ida73c4166e996fcf2c8c936d0c76d0a89a220d89
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds porch calculation support to maintain
constant fps during clock switch for CPhy.
Change-Id: I74b2f0e064441fba7f452b06438ece7fe3b373eb
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
This change adds support for C-PHY dynamic clock switch feature.
Also add support for phy ver 4.0 C-PHY timing parameters calculation
to be used for clock switch.
Change-Id: I8292860fd8c93a7ba7988ec8c44ea9683f45b6e6
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
As per DSI HPG, Soft reset is not required to disable
video mode operation for version 1.3.0 and later. So,
add check to skip it during display disable.
Change-Id: If6d263bdf22f8a6fbef76d78d04bb9d11be05945
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
As per DSI HPG, pll delay should be 25usec for phy ver 4.0 and
100usec for phy ver 2.0 and 3.0. This change updates pll delay
calculation during dynamic DSI clock switch accordingly.
Change-Id: Ief5cbdc9304cf5ad025fe3bbe689b93834a1f710
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
During clock switch, Pll delay is calculated considering escape
clock to be in KHz. But escape clock is in Hz. This leads to wrong
pll delay calculation.
Change-Id: I616d16cc3d775a37e77c7c35bb860c23b1f9e37a
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Update the DP controller and PHY programming to support different
values for pre-emp and voltage swing levels at different link rates.
Change-Id: I974c47cd1bf71b76dea4f270031a9cdfe320725e
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
Add changes to reserve dsc blocks by routing even numbered
dsc encoders to even pingpong blks and odd numbered dsc encoders
to odd numbered pingpong blks.
Change-Id: I9242b3f7a2784194f9e4a7d30eff6ae3ec16b196
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add NULL pointer checks, before accessing the controller node.
Change-Id: If24c4fd4352ef5ab7642c817ddaa61a80b725c99
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Fix the check for uneven split across LMs when destination
scaler is used and reject the use-case since this is not
supported by the driver. This can happen if an odd-value
for the horizontal width is being split across 2 mixers.
The existing check was broken since it uses pass-by-value
with a zero initialized value that callee tries to update
while iterating over the DS configurations. Use pass-by-
reference with the previous DS configuration, if available,
instead of just 0 values so the proper comparisons can take
place.
Change-Id: I529faf57e43fb471b28b4d222260ea4d37217d4d
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
A new status register was added in DPU 5.x to INTFs to allow for
confirmation when the timing engine is disabled. This
functionality was controlled via an overloaded feature flag
which is used to enable INTF tear-check ops (also added in DPU
5.x). External displays support INTF_STATUS but have no use for
any tear-check functions. Separate these features so they can be
enabled individually on the interfaces which support them.
Change-Id: Ib8548619cb58bf19b7c02211ead7f33f52ffeae4
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
In current driver, during system cache read mode update control flush
is invoked and there after commit thread is allowed to pick up next
commit. This can lead to improper frame flush and cause hangs or
underrun. This change add a wait till frame done after system cache
update to frame read mode.
Change-Id: Ic88e0bdbaaa1f45f825d40ecde4de9e8dea2efef
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change programs rotator sid value irrespective of
continuous splash since it is not configured from
bootloader. It also handles trusted vm support
to prevent accessing mdss hw register.
Change-Id: I80e286364286457545dfa236d629447241d98f95
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
A mode switch on a real monitor can be triggered by forcing the new
mode using debugfs and initiating an hpd_irq. Due to a missing
check for simulator state, the current driver calls the hpd_irq
callback for simulator even for a real monitor. This change adds
this check.
Change-Id: I13480eccd27eac2f9df3dd766d0445c0a5ea9b2c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Introduce event logs for lutdma kickoff operations to make
LUTDMA usage more apparent in crash dumps. This will aid in
debugging and triaging LUTDMA issues.
Change-Id: I81b570dfc21b03627cdaf5d9693b786839716571
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Add hooks to dump LUTDUMA debug bus status during dumping
of system debug status. LUTDMA debug bus can be accessed
from userspace via the "recovery_lutdma_dbgbus" debugfs node.
Output control of the LUTDMA_dbbus is managed by the
"reg_dma_dbgbus" node.
Change-Id: Iea011279dd3806f0f594102ce7a5dc018a8d2b7c
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change allows dynamic refresh trigger to sw trigger
and mdp intf flush. With this we can make sure that DSI
timing/clock update and mdp intf timings are updated in
one vsync.
Change-Id: Ic807f498e2e47be6dd0f1e11ff1fc0896a8ec758
Signed-off-by: Vara Reddy <varar@codeaurora.org>
DP MST driver registers bridge callback functions with the DRM framework.
mst_lock is used for synchronization of the mst bridge functions. These
functions call into dp_display where a session lock is obtained for
the display. HPD callbacks, on the other hand, are first handled by
dp_display. During these callbacks, dp_display takes a session lock
first before calling into DP MST driver layer. Currently, the DP MST
layer waits on mst_lock which can result in a deadlock.
This change removes the usage of mst_lock inside hpd callback functions
and just uses the session lock for synchronization.
Change-Id: I7ec338004eef43ac0f1e1f092463e9915cd60684
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
This change resets the mixer swapping flag in crtc on a
seamless mode switch. In case of switching from command
mode to video mode it is a seamless mode on crtc, but we
disable connector and encoder. Due to this crtc fails to
reset the mixer swap since it is tied to dsc merge topology
on master connector. In transient state master connector
is not set and is set only after enabling the new mode on
connector.
Change-Id: Idebdabd642625b894100f62aeb62f11a9c101b03
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
The lock used by the dp debug driver to synchronize the maintenance
and usage of the list of mst connectors is not initialized. This
change adds the missing initialization and deinitialization calls.
Change-Id: I4c24600b47c0b90c256caff45edaea07d082908d
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The simulation case uses dp_mst_sim_detect_port which
calls the drm detect port function after checking
the mst state. The non simulation case calls the drm
function directly.
This leads to cases in the disconnect path where
connectors are detected while being unregistered.
This solution merges the simulation and non simulation
cases by using the same detect port function, where a
check for mst state is performed before calling the
drm function.
Change-Id: I4a93001131beda54f8146bd50edc036924c94ab1
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Currently driver uses wrong index to retrieve partial update
ROI during check phase. This can lead to ROI being 0 for some
of the CP properties.
Change-Id: I885132e8d29eaf1353ed079eb283f7ca3a3d63a6
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
UIDLE and QoS LUT configurationis might be different between
different frame rates.
Add this change to update UIDLE and QoS LUT according to frame
rate when DRM mode is changed.
Change-Id: Ia16a963e185b911b7dd11e81a26cab732c2b185c
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
