mcs is copied over to already in used ppdu_desc
this prevents ppdu_desc to increase lower mcs counts during stats
process
Change-Id: Iec68438a86359ec791302ecf2eeaec4fbd941632
DBR srng details are not sent properly to F.W via WMI_DMA_CFG_REQ
msg, this leads to F.W accessing undefined address.
Fix this by passing DBR srng details properly.
Change-Id: I15b393ad809dc0757e3637558f0bddd05530149d
CRs-Fixed: 2861621
Firmware advertises service capability WAPI_CONCURRENCY_SUPPORTED
if it supports other security modes when WAPI is active. Get the
same from service capabilities to decide whether to accept a
new concurrent connection or not.
Change-Id: I718503e52be2dda8ebd440f5a68b496d846b6ffc
CRs-Fixed: 2858770
In connection success case the unlink BSS is not required, so
add the status check.
Change-Id: If5e2d02b37865267a096f01f0835bdccbc8e1c3d
CRs-Fixed: 2860102
Suspend type log is very critical for debugging wow related
issues, and hence log this using wmi_info level.
Change-Id: Icac658bdb10682bc02dd5aa7ad37d0a74d4a2bc0
CRs-Fixed: 2860518
Add support to process RX offload packets in packet capture mode.
To distinguish rx offload packets from normal rx packets,
DP_PEER_METADATA_OFFLOAD bit is set in peer metadata, based on value
of this bit rx packet is delivered to stack or packet capture
component.
Change-Id: Ice656a0bc14efd0382c4949d695daa8e926ce41e
CRs-Fixed: 2856792
Use non-inline OS-abstraction APIs to avoid direct
usage of kernel API's.
Use non-inline OS-abstraction APIs instead of OS APIs.
Change-Id: Ie4acfedc63a0e0e8ecbe358db711148db92bd8b6
Since in wmi_gpio_config_cmd_fixed_param, the input
0 mean output, and 1 mean input, which is different
from host side enum gpio_direction. So add this fix
to do the right conversion.
Change-Id: Id60a9327e853440fd58a45c7c839109cf1f22c22
CRs-Fixed: 2856833
Firmware has added support for control path stats
infrastructure. Add wmi support to prepare wmi tlv buffer
and send WMI_REQUEST_CTRL_PATH_STATS_CMDID. In the response
path, add support to handle WMI_CTRL_PATH_STATS_EVENTID and
extract the tlv.
Change-Id: I930a44187af29adfda8acd90d0e41cff5fc94603
CRs-Fixed: 2856370
Add common target_if event handler for wmi_pdev_cp_fwstats_eventid
from the control path stats infrastructure of firmware and register
with the wmi.
CRs-Fixed: 2856380
Change-Id: Ia16e34c4dc1e12b817258c5e6d617a8cb560cf5b
TLV targets advertises the agile Spectral capability in the
chain mask table of extended service ready event.
For legacy targets, mac phy capabilities, which holds the
chain mask table is null. This leads to a load time crash
for some legacy platforms. To fix this, initialize
agile Spectral as disabled for the targets which doesn't
support extended service ready message.
CRs-Fixed: 2854348
Change-Id: I09a64259b31e3e5eb0441f35dbb9451dec001780
After connect scan the cm_connect_start is called again and it
end up calling ifmanager and connect start API again, leading to
thread blocking and assert.
Fix this by calling these indication only on the actual connect
start req and not from scan state.
Change-Id: I86ed7b1b84fcce715b52f8041b3d565dc6d949c8
CRs-Fixed: 2860082
Following fields in the Spectral FFT report have been modified in the HW
in the version 2 of the Spectral report, reflect the same at the Host.
- fft_radar_check
- fft_peak_sidx
- fft_chn_idx
- fft_base_pwr_db
- fft_total_gain_db
CRs-Fixed: 2855909
Change-Id: I8dd190cae8da260d1fb639342ca980285bfd3d0e
For QMI events qdf_nbuf_set_pktlen is invoked twice. Once in
wmi_buf_alloc and again in __wmi_process_qmi_fw_event. Remove
this duplicate set packet length.
Change-Id: I06c7e077fb1d554215a5ebc52f9d69a333a25a84
CRs-Fixed: 2859036
Add support in cp stats component for the control path
stats infrastructure provided by firmware via
WMI_REQUEST_CTRL_PATH_STATS_CMDID and
WMI_CTRL_PATH_STATS_EVENTID. Also add support for TWT
type operations over this infrastructure.
Change-Id: I154babff396ac39c11c7548ad91cc4dc0d0c52af
CRs-Fixed: 2847603
cfg80211tool wifiX getRegdomain does not display the current 6G super
domain code. This is because, when the WMI_REG_CHAN_LIST_CC_EXT_EVENT_ID
is received from the target, the 6G super domain code is not copied to
the pdev_priv_obj. Therefore, copy the 6G super domain code to the
pdev_priv_obj to display the current 6G super domain code.
Change-Id: If2e0bfc69cad3a4c47e73fdb35ad08eecb0cb48d
CRs-Fixed: 2856074
Use non-inline OS-abstraction APIs to avoid OS APIs usage directly in
driver.
Add new non-inline OS-abstraction APIs.
CRs-Fixed: 2742480
Change-Id: I177b41d69ca8f102fa67316d8901b6991dea3203
Using this option the user pd assert and root pd assert can
be linked together or unlinked from each other.
By default, a user pd assert leads to root pd assert.
Unlinking the user pd assert from root pd assert helps in
handling the selective radio recovery seamlessly.
Change-Id: I734805b060bf1cb11a0dc325bae5dbf6ed7db83f
In the API reg_find_txpower_from_6g_list, if the frequency is not found,
txpower is not touched and could cause undefined behavior. Initialize
it to 0.
Change-Id: Ic65c678144bf88959407ef28ab0d401278fa4738
CRs-fixed: 2855200
Return proper value of qdf timer multiplier based on this
Kbuild option QDF_TIMER_MULTIPLIER_FRAC.
Change-Id: I10c08ba900aad49fb9134d2e4d337f04a19dec7b
CRs-Fixed: 2855512
The sm engine header files are required only for ADFS sm handling.
Move the header file to the ADFS sm source file.
Change-Id: Icc77a889d6bf28d8c0b20a12944f9be78d1a8c27
CRs-Fixed: 2853428
When parsing FILS Indication IE, the data pointer is not
validated while moving the pointer which may cause
out of bound issue.
Validate data pointer before moving pointer.
Change-Id: Ib20f78fe58d7a4c8f9245e6b8d28212499cc6f50
CRs-Fixed: 2842475
DP references of the peer will be removed once we receive PEER
unmap message from the firmware. If the firmware has failed to
send the peer unmap message (due to an assert in FW), then the
peer entries will remain the inactive peer list and will trigger
a explicit QDF_BUG() during driver unload.
Force clean the inactive peer/vdev list during driver unload in such
cases.
Change-Id: Ib8a5f8179ce51378a825034e411f89ff024017e1
CRs-Fixed: 2847742
DFS component's pdev private object allocation is skipped in
few scenarios. In this case return agile precac enable as false.
CRs-Fixed: 2853435
Change-Id: I7725e9bcbd05b2c9f1b1ee217cc8eb8a2df8144a
The prints from the driver are rate limited based on the
configurations provided.
Also the prints which are redirected to user space daemon
and of certain log levels are also printed on the console.
Add a rate limiting version of the API for the prints coming
to console via the logging daemon.
CRs-Fixed: 2853590
Change-Id: I9683172ac0665b46581bad13a1050c6d70d72b5c
Initially, Host updates the AKM only after the EAPOL
handshake. Due to this, Enterprise auth is not detected
for initial connection.
Add AKM in peer assoc command(WMI_PEER_ASSOC_COMMAND)
to the firmware. In firmware, this will help to detect
Enterprise auth as part of connection and prioritize
the WLAN connection over BT traffic accordingly.
Change-Id: I6463dacbba098c76e6c3b7f4722915797bee1a99
CRs-Fixed: 2848392
In case of pdev attach failure reset pdev reference in
soc->pdev_list to NULL before free to avoid use after
free
Also initialize WDS aging timer only when ast hash is
allocated
Change-Id: I6a406bd94aa46a95d9e5bb970ae83b3dfde29d0a
Reassoc fail event is dispatched either from one of the roam states in
connection SM or from peer create response handler.
Hence dispatch reassoc fail in sync/async mode.
Change-Id: I4dc462b956610a480e0c963676988492a73285f3
CRs-Fixed: 2852393
