Call ol_peer_unmap handler when AST_OFFLOAD_SUPPORT
is enable, so that client_disconnect event can be
sent to IPA.
Change-Id: I85efb432f94310c847aeda22a99bd999957c32d7
CRs-Fixed: 3495890
The number of perf CPU clusters can vary across
different targets. Currently only the second CPU
cluster is considered as the perf cluster, whereas
there can be more than 1 perf clusters.
Fix this perf cluster derivation for interrupt
affinity.
Change-Id: Ie4407064ac5124fc050715fd75400ca516c9c6b8
CRs-Fixed: 3498024
Current Hw Tx latency stats logs over 50 lines. This
change will reduce the stats to a concise logging.
Change-Id: Ia449ca1d97eabac069a1e8b46c64a73c4ab912ed
CRs-Fixed: 3299078
Logs without meaningful message or values serves no purpose in debugging.
Hence, add more context to the logs.
Change-Id: Ia463d239a9bf26f292a11bcc71cb1379374c45e4
CRs-Fixed: 3492593
Logging macros already takes care of adding function name.
Hence, delete the occurrence of __func__.
Change-Id: I44ef5d7f030eba16decb9611f16001c6e9d42b3b
CRs-Fixed: 3492505
Add qualifier flags in link preference structure which represent
bit is set for TLT or preferred link
Change-Id: I85a5fee0a804f6803fa52b5052bbcf635a613025
CRs-Fixed: 3482281
To enable the tx queues faster during roam, boost the
CPU min frequencies to maximum once roam start is received,
and reset them once queues roam sync is complete or
roaming is aborted.
This change enables such support for lithium and Clarence targets.
Change-Id: I49d2f50f1c0142e7db1c981276bd08b75159b6d3
CRs-Fixed: 3487573
Currently, Fw did not set NACK reason code
to Host when Fw is not ready for WoW.
As part of the new change, Fw will send NACK
reason code along with WoW NACK to host.
Make changes in host to parse NACK reason
code from the received message.
Change-Id: I17ee99cb302ff546731a46d3ce03977c3c3d5a67
CRs-Fixed: 3481189
After mode1 recovery, because of short circuit operator "&&",
decrement of init count is not happening and causing failures
to read global shmem arena tlv, fix the issue by changing the order
Change-Id: Iae922f09c2a9c3690318e35657f92cc3bf1061e7
CRs-Fixed: 3497802
It is possible that the host queued the peer delete command to FW
but no peer delete event was received within the peer delete
timeout as FW initiated a UMAC reset.
When the vdev mgmt response timer times out, check if umac reset is in
progress. If so, restart the vdev mgmt response timer.
The entire umac reset handshake completes within 200ms if not
FW asserts. Hence no need to add the count check before
restarting the vdev mgmt response timer.
Change-Id: Ief3351b940658a870e303d191a3873bd60499023
CRs-Fixed: 3475168
The to_fw bit in HW descriptor is not set for exception
marked skb that is scattered across multiple pages. In the
case of direct link, this would result in crash as TQM
bypass mode is used for direct link vdev.
Fix is to set the to_fw bit to 1 in HW descriptor for
exception marked skb.
Change-Id: I060ad4ad59f85e09f39bd85080e0b3138a39402c
CRs-Fixed: 3490554
Add structure peer_vlan_config_param for
WMI_PEER_CONFIG_VLAN_CMDID to support vlan peer config
Change-Id: I2f93ce2bd10d1920d33ee0e26d1b7d344813852b
CRs-Fixed: 3492156
It is observed on sdxpinn target (first multi-core MDM platform)
that WLAN failed to enable IPA pipes with SAP-SAP mode when first
ref-client connects to the SAP. Indeed with QCA_CONFIG_RPS=y and
qdf_ipa_get_lan_rx_napi()=true, wlan_ipa_uc_handle_first_con()
directly returns false if more than 1 SAP is started.
This obviously breaks IPA data path for MDM platform, where even
4 SAP can be supported with IPA offload. And WLAN data path
forwarding replies fully on IPA hardware. This also means there's
no need to configure RPS for MDM, which is a host kernel networking
feature.
Change-Id: I4c17f61b1b242cdbaed7177201b330d10ec7e61b
CRs-Fixed: 3490817
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
Add Tx TLV recording support for monitor 2.0
Also add support to control Rx and Tx TLV
recording
Change-Id: I27a0d2c9ea8bdfacd46e6b7188b45b08ed47bbcd
CRs-Fixed: 3422787
For MBSSID case, ML IE does not contain full per-STA profile info
in MBSSID IE. When generating the beacon and probe response frame
for MBSSID case, it needs to copy the ML IE info from main frame.
Change-Id: Id369d08772f11a5f0f838351b5b76ecce3762c55
CRs-Fixed: 3479932
Add support for secure NAN and auth/deauth random TA feature by
enable compilation flag "WLAN_EXT_FEATURE_SECURE_NAN" and
"WLAN_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA"
Change-Id: I23788c3f48a61d8dc293b1049aa027a725386f6a
CRs-Fixed: 3493515
On some third-party platforms, we observe the memory physical
address below 0x2000 is allocated will cause HW/FW NOC error,
so this region memory should not use by host.
This change will hold the memory if the allocated memory physical
address below 0x2000 until driver unload.
Change-Id: I37b6abc98033230dc4f572dafb849101497f6e93
CRs-Fixed: 3419648
1. Update (or) Add the following country mapping to regdomain for 6 GHz.
i) Update 6 GHz_MKK1_VLP power to 1dBm/MHz (PSD) and 14dBm (Total)
ii) Update 6 GHz RD Defs "6g_APL5_VLP" to support only 5925-6425 (UNII-5)
band.
iii) Create 6g_APL5_CLIENT_LPI_DEFAULT (Hex code : 0x31) and 6g_APL5_AP_LPI
(Hex code : 0x32).
iv) Create Full 6 GHz reg domain Hex code 0x13 and mapped to CHILE.
v) Map full 6 GHz reg domain HEX CODE 03 to UNITED KINGDOM territory
countries: FALKLAND_ISLANDS, GIBRALTAR, GUERNSEY, ISLE_OF_MAN, JERSEY,
MONTSERRAT, VIRGIN_ISLANDS_BRITISH.
vi) Map full 6 GHz reg domain Hex code 02 to countries: GEORGIA, HOLY_SEE,
ITALY, TURKEY, GREECE, LATVIA, LUXEMBOURG, POLAND, SAN MARINO, SLOVAKIA,
SLOVENIA, SRI_LANKA.
vii) Create 6g_FCC3_VLP (Hex code : 0x06).
viii) Create Full 6 GHz reg domain Hex code 0x14 and mapped to
DOMINICAN_REPUBLIC.
ix) Update 6 GHz subdomain name from "6g_FCC2_SP" to "6g_FCC2_AP_SP"
x) Create 6g_FCC2_CLIENT_SP (Hex code : 0x07) and add to full 6 GHz
regdomain hex code 0x10.
xi) Map Full 6 GHz Reg domain Hex code 01 to GRENADA
2. Add or update the following regulatory database (2.4/5 GHz) for all.
i) Create new 5 GHz regdomain FCC20 (Hex 0x0B75) and Full 2 & 5 GHz
regdomain FCC20_FCCA (0xEF).
ii) Update CHILE from FCC13_WORLD to FCC20_FCCA
iii) Remove indoor flag from ETSI13 UNII-1.
iv) Remove indoor flag from ETSI18 UNII-1.
v) Create new 5 GHz Regdomain ETSI20 (Hex 0x0E46) and full 2 & 5 GHz
regdomain ETSI20_WORLD (0x7C).
vi) Update APL14 CTL map to CHINA CTL.
vii) Update APL9 CTL map to KOREA CTL.
viii) Create new 5 GHz regdomain APL29 (Hex 0x1234) and Full 2 & 5 GHz
regdomain APL29_ETSIC (0x77).
ix) Update GUATEMALA from APL19_ETSIC to APL29_ETSIC.
3. Update or Add the following regulatory database(2.4/5 GHz) only for WIN
i) Map from ETSI13_WORLD to ETSI20_WORLD to countries: BOTSWANA, BURUNDI,
CONGO_DEMOCRATIC_REPUBLIC, KENYA, LAO_PEOPLES_DEMOCRATIC_REPUBLIC,
RWANDA, SAUDI_ARABIA, SOUTH_AFRICA, UAE, ZAMBIA.
ii) Map CHINA from APL14_WORLD to APL14_CHNA.
iii) Map KOREA_ROC from APL9_MKKC to APL9_KRRA
4. Update or Add the following regulatory database(2.4/5 GHz) only for
Linux Android
i) Map from ETSI13_WORLD to ETSI18_WORLD to the following countries:
FALKLAND_ISLANDS, GUERNSEY, ISLE_OF_MAN, JERSEY, MONTSERRAT,
SAINT_HELENA_ASCENSION_AND_TRISTAN_DA_CUNHA, VIRGIN_ISLANDS_BRITISH.
ii) Map GIBRALTAR county from ETSI1_WORLD to ETSI18_WORLD.
iii) Map from ETSI13_WORLD to ETSI20_WORLD to the following countries:
ALBANIA, BOSNIA_AND_HERZEGOWINA, BOTSWANA, BURUNDI,
CONGO_DEMOCRATIC_REPUBLIC, KENYA, LAO_PEOPLES_DEMOCRATIC_REPUBLIC,
MACEDONIA, MAURITIUS, MOLDOVA, -MONACO-, MONTENEGRO, RWANDA, SAUDI_ARABIA,
SERBIA, SOUTH_AFRICA, TURKEY, UAE, ZAMBIA.
iv) Map CHINA from APL14_WORLD to APL14_CHNA.
v) Map KOREA_ROC from APL9_MKKC to APL9_KRRA.
5. Update or Add the following regulatory database(2.4/5 GHz) only for DSRC
i) Map ETSI20_WORLD to the following countries: ALBANIA,
BOSNIA_AND_HERZEGOWINA, BOTSWANA, BURUNDI, CONGO_DEMOCRACTIC_REPUBLIC,
KENYA, LAO_PEOPLES_DEMOCRATIC_REPUBLIC, MACEDONIA, MAURITIUS, MOLDOVA,
RWANDA, SAUDI ARABIA, SERBIA, SOUTH_AFRICA, TURKEY, UAE, ZAMBIA.
ii) Map CHINA from APL14_WORLD to APL14_CHNA.
iii) Map KOREA ROC from APL9_MKKC to APL9_KRRA.
6. Update or Add the following regulatory database(2.4/5 GHz) only for Auto
i) Create new 5 GHz Regdomain MKK18 (Hex 0x1660) and Full 2 & 5 GHz
regdomain MKK18_MKKC (0xEE).
ii) Update Japan from MKK17_MKKC to MKK18_MKKC.
iii) Create new 5 GHz Regdomain FCC21 (Hex 0x0B76) and Full 2 & 5 GHz
regdomain FCC21_ETSIC (0xD2).
iv) Update BRAZIL from FCC18_ETSIC to FCC21_ETSIC.
v) Create new 5 GHz Regdomain ETSI21 (Hex 0x0E47) and Full 2 & 5 GHz
regdomain ETSI21_WORLD (0x7D).
vi) Map ETSI21_WORLD to the following countries: ALAND_ISLANDS, ANDORRA,
AUSTRIA, BELGIUM, BULGARIA, CROATIA, CYPRUS, CZECH, DENMARK,
ESTONIA, FALKLAND_ISLANDS, FAROE_ISLANDS, FINLAND, FRANCE, FRENCH_GUIANA,
FRENCH_POLYNESIA, FRENCH, SOUTHERN_TERRITORIES, GERMANY, GREECE, GUERNSEY,
HOLY_SEE, HUNGARY, ICELAND, IRELAND, ISLE_OF_MAN, ITALY, JERSEY, LATVIA,
LIECHTENSTEIN, LITHUANIA, LUXEMBOURG, MALTA, MARTINIQUE, MAYOTTE,
MONTSERRAT, NETHERLANDS, NETHERLANDS-ANTILLES, NEW_CALEDONIA, NORWAY,
POLAND, PORTUGAL, REUNION, ROMANIA,
SAINT_HELENA_ASCENSION_AND_TRISTAN_DA_CUNHA, SAINT_PIERRE_AND_MIQUELON,
SAN_MARINO, SINT_MAARTEN, SLOVAKIA, SLOVENIA, SPAIN,
SVALBARD_AND_JAN_MAYEN, SWEDEN, SWITZERLAND, UNITED_KINGDOM,
VIRGIN_ISLANDS_BRITISH.
vii) Map from ETSI13_WORLD to ETSI20_WORLD to the following countries:
ALBANIA, BOSNIA_AND_HERZEGOWINA, BOTSWANA, BURUNDI,
CONGO_DEMOCRACTIC_REPUBLIC, KENYA, LAO_PEOPLES_DEMOCRATIC_REPUBLIC,
MACEDONIA, MAURITIUS, MOLDOVA, -MONACO-, MONTENEGRO, RWANDA, SAUDI_ARABIA,
SERBIA, SOUTH_AFRICA, TURKEY, UAE, ZAMBIA.
viii) Map CHINA from APL14_WORLD to APL14_CHNA.
ix) Map KOREA_ROC from APL9_MKKC to APL9_KRRA.
Change-Id: I77c4da2f48005619b888281c034e49f28bb584e4
CRs-Fixed: 3421200
With Single Netdev Unified and Hybrid Mode,
the calculation of vdev stats is changed as
per the mode. For LI platforms the path
to get vdev stats is still same while for
BE the vdev stats config path is different.
Introduced Arch ops to handle this diversion.
Change-Id: If4f0f49e78d35126942cd3f1872a5856e4d0f5ba
CRs-Fixed: 3482567
Management Rx event parameters structure is are accessed for debug
logging, after the frame is queued in the egress/ingress list. The queued
frame might get dropped in the mean time and this may lead to the
freeing of the management Rx event parameters structure. Fix the issue
by splitting the logging into two parts. Required fields of management Rx
event parameter structure are logged before updating the ingress/egress
list.
Change-Id: If7847fa3a7aca1298216aef91f089aa77d94e6a9
CRs-Fixed: 3489094
Add vdev stats support for DP MLO Unified
and Hybrid Mode.
Add new CDP API for getting vdev stats for
NON_MLD interface.
Add support to get vdev stats for specific
vdev which is a part of MLO.
Change-Id: I72c8b25958649d473e1b65cee21810cd86951187
CRs-Fixed: 3455607
"prev_bssid" can be AP mld address if current connection
is mlo connection. Allow roam if "prev_bssid" is AP mld
address.
Change-Id: Iebc71acae11fcbfb4fc98ec2199d546d71ef057c
CRs-Fixed: 3489879
Do not use API to do variable initialization job.
Otherwise there is built error in some platform.
Change-Id: I489057a2753bf7bf091e87b902efa833ea90ece9
CRs-Fixed: 3471557
Currently as IPA_OFFLOAD path is enabled for OPT_WIFI_DP
usecase, this causes SAP/GO D3 WOW to be disabled.
This change will add a check to ensure D3 WOW is
enabled when IPA path is set for OPT_WIFI_DP usecase.
Change-Id: Idbbec78dadcba3e8f26b9c01e296869cd7278750
CRs-Fixed: 3496857
Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
IPA does not support dynamic voting for max BW supported.
Hence WLAN has to do static and one-time vote for max
BW supported.
For KIWI family, vote 4800 to achieve nominal scaling.
For other chipsets, keep 800 as is and modify if new
requests are needed.
Change-Id: I2eb82857355097de5ab7c508df0e84eb1a141654
CRs-Fixed: 3482693
This change processes Duplicate Assoc req from MLO Station
This would reuse old link peers and populate assoc req IEs.
This will fail, if Assoc link is not same as previous,
and number of links are not same as previous assoc req
processing.
Change-Id: I6a8c412b0bc484e8eb64ca794e54e080c391f7f8
CRs-Fixed: 3465223
enum reg_afc_dev_deploy_type afc_dev_type is defined as variable in
service_ready_param.h if AFC enable, reg_afc_dev_deploy_type defined
in wlan_reg_afc.h.
Include this head file if AFC enable so that don't have to include it
everywhere include service_ready_param.h.
Change-Id: I4bab90dc051c8afb984d7a486c97743b5c277589
CRs-Fixed: 3482426
In case of MLO, to avoid race between ongoing connect and a new
disconnect, add fix to validate disconnect req for MLO STA
Change-Id: I4b27a06103ffce637738b1894c3bdcf46533043c
CRs-Fixed: 3493915
When a new MSDUQ is instantiated for a peer, additional
dynamic AST indices are allocated.The new AST indices
should be used in subsequent MSDUs.
Handle the HTT message to update the dynamically allocated
AST indices.
Change-Id: Iea24e1f3523006f40c781abdc3c176ba25ecd5a5
CRs-Fixed: 3449259
