This change defaults each msm_obj buffer to non secure context
bank. This allows the cache maintenance operations to be performed
correctly on the msm_obj if it is used for GEM buffers.
For dma-buf heap buffers plane would assign the correct aspace
based on fb translation mode property.
Change-Id: Id07f844f0fe55bbe6b4d0748019a13455b510fb8
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Add up_req support for mst_sim_helper when port state is updated.
Add reset support when hotplug becomes low.
Change-Id: I72341bd845f9061a59af6740b9862ebbc4c8979e
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Karim Henain <khenain@codeaurora.org>
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Add below new APIs to dp_mst_sim to allow more controls from other
dp modules:
dp_sim_create_bridge: create dp_sim bridge simulator.
dp_sim_destroy_bridge: destroy dp_sim bridge simulator.
dp_sim_set_sim_mode: enable/disable simulation mode.
dp_sim_set_mst_mode: update dp-mst simulation mode.
dp_sim_update_port_status: update dp-mst port status in simulator.
dp_sim_update_port_edid: update dp-sst/mst port edid in simulator.
dp_sim_write_dpcd_reg: update dpcd register in simulator.
dp_sim_read_dpcd_reg: read dpcd register from simulator.
With the new functions dp_debug can move its internal debug function
to dp aux simulator, and dp_display can switch between simulation
mode and physical mode dynamically.
Change-Id: I26296b45a38dac422b8a098b50dca287909c8000
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Karim Henain <khenain@codeaurora.org>
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Add dpcd/edid support to dp aux simulator to enable below features
as options:
skip edid read
skip link training
skip dpcd read
skip dpcd write
skip hot plug
skip sideband message
Also added debugfs support to update dpcd/edid and enable/disable
above features.
Change-Id: Ifa9153f2f00442f3cd5ee3db63fa93384ebc638f
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Karim Henain <khenain@codeaurora.org>
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Add sideband simulator aux bridge to re-direct sideband message
from aux channel to internal emulation software stack. When this
bridge is connected to DP device, simulator will read ports configuration
from device tree and fake all sideband messages.
Change-Id: Ib8af2e0f4ba9b0d02413d40b796e5006b376ada8
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Karim Henain <khenain@codeaurora.org>
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Add dp-mst sideband message protocol simulator to simulate
downstream reply. This is useful for special bridge that
doesn't support sideband message.
Change-Id: I7670abd3505affb9db3232747b86681cea0b4310
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Karim Henain <khenain@codeaurora.org>
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Create the framework to support external dp aux bridge device which
can handle DPCD/I2C/HPD from external.
Change-Id: Iabd0998efc8bf7134d186b1751d219c00217385c
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Karim Henain <khenain@codeaurora.org>
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
DP driver maintains the number of allocated DSCs per stream for managing
the availability of DSC blocks for each stream. In the current driver,
if there are errors in the disable path, it is possible for the refcount
to go negative thereby affecting the availability of DSC blocks in
subsequent enables.
This change fixes the refcount logic by making sure the DSC count in the
context correctly reflects the usage.
Change-Id: Id595ec87c186ddb3ed300e1390384f367ef79148
Signed-off-by: Sandeep Gangadharaiah <sandgang@codeaurora.org>
This change adds support for error checking ubwc and meta error status
based off whether REC0 or RECT1 is used.
Change-Id: I7c39755da99a9d6c0d02b4ef16fa93b8ec7458a9
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change adds the support to request the dp link clk rate
through the mmrm driver. In the case the system can not
support the rate, user space is notified of the failure and
dp is diconnected.
Change-Id: I4a074054ce42425ca940d4aec505723724736b44
Signed-off-by: Christina Oliveira <coliveir@codeaurora.org>
HW recommendation is to park the DSI byte clock and pixel clock at XO
before turning them off. The change parses XO from the DT and sets the
clock source as XO while turning off the PLL.
Change-Id: I788951d6341149300e80e8db4a5a3fd2c4eb3e03
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Reverting the backlight register call, as devm_backlight_device_register is not
available in the abi whitelist.
Change-Id: Ieb200bd8fb9393397fd3f0e013e3f7573eda8a38
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The modeset lock acquired in dp_mst_connector_detect is not
being released after the detection is completed, which
causes subsequent deadlock.
Added a call to drm_modeset_drop_locks when coming out of
dp_mst_connector_detect.
Change-Id: Ibce79934d0ac23fed4985291c5c6078cb982e812
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Clean up ctl set up blend stages op to be more robust by
relying on global sspp stage register mapping.
Change-Id: I6d1594d52c275b6d848f51597a8f2411a8711b95
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
To avoid kcalloc for the multirect plane states and plane states will now
be stored sde crtc. These states are populated momentarily and accessed in
a single context for a handful of functions then are not used. This will
clean up parameters passed between functions in the commit path as well.
Change-Id: I6a8116a43c140b3f1c0464734032b8db13c1cfb0
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
When doing mode set, check the given videomode, if it
can be only supported in YCBCR420, set the output
format to YUV420.
Change-Id: I74224e5ad70f4fd8834b5b1e19109d4868cc14ff
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
NV12 and NV21 formats need to be aligned to 128x32 as per the
requirement.
Change-Id: Ic03ac5786703d8d46a2f2a57559ac334d4e66971
Signed-off-by: Ravi Ranjan <rravi@codeaurora.org>
rtb driver is moved to tracepoint method as of 5.10, and there is no proper
support for no_log variants of read/write operations. Add dummy no_log apis
to msm_rtb.h file as temporary solution, and include msm_rtb.h in rotator
for no_log support.
Change-Id: I3f833fdfb741039a30a7d23aee2b20b9f62e14e1
Signed-off-by: orion brody <obrody@codeaurora.org>
Fix invalid condition in TE configuration missed during
porting of previous change.
Change-Id: Ie6b1926e6fdd1e0ec3b520593b1e5cbfbf9e4202
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change splits the APPS RSC bandwidth vote to use
MNOC and EBI and moves the IB bandwidth
vote from DISP RSC to APPS RSC.
Change-Id: Ib329a018cafdec33a6838bdb46c7f5ac2352dd88
Signed-off-by: Christina Oliveira <coliveir@codeaurora.org>
These can be reference with the qti_display_kernel_headers header
library.
Change-Id: Id8b983bb2c7d9d3f999d93b88de953a8b606aa1b
Signed-off-by: Manoj Kumar AVM <mkavm@codeaurora.org>
Generalize the demura pipe index capability on sde_plane objects to
instead provide the relative pipe index for all plane types. This
information can be used by clients to fully determine a plane type
and its position.
Change-Id: I597da0dab92c249b16934b9327353e4937635606
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Change uses devm_backlight_device_register to register for backlight device
as backlight_device_register is deprecated as of 5.10. Change also removes
failure if cooling device is not present to avoid connector_init failures.
Change-Id: Icc834fa39ec0de221cc48e280637e6cbbf3451b4
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Recent iommu refactor changes moved few defines for early map to
qcom_iommu_util header. This change includes the iommu util header
for fixing compilation.
Change-Id: I4db203bc4131829d40aa86ddcb58f58a20a8a271
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Change adds the new compatible version strings for DSI PHY and DSI CTRL
for waipio.
Change-Id: I1073034e608cace9d41cc04a9854f15f56828dfe
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change disables dp compilation on waipio. This is required
till the missing abi symbols for dp compilation are available
Change-Id: Ib8f0a390870ead9c37e89641a49d12a91288c375
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Change removes the use of custom MSM DSI flags that will not be
available as part of GKI.2.0
Change-Id: I2337a54b1d6346ebdc18e9e6c3c8e7a07f421bdd
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change adds required make file support to include
display driver in vendor SI compilation and packaging.
Change-Id: Ib7b97ac136b536da9a297f1a3725ff4b2107e2ed
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
iommu_map_sg has been updated and is expecting argument
orig_nents instead of nents. This change updates the parameter
in places where that function is being used.
Change-Id: I3b15485e3f0186f1d2f1c81a8205c46b521893f3
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change enables compilation of sde, dsi, dp, dp_mst, rsc etc.
for waipio gki config. Change also includes minor fixes in make files
for dlkm.
Change-Id: Ia3f8cfa43ba84239cd7606215196ff57c6a43215
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Add Android make files and Kbuild files to support dlkm
for display driver. Also resolve header and config issues
to allow successful compilation of display driver.
Change-Id: I04d6233864ea54c0a808b295fbdccb83058f1fd2
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
