These fixes are made during qca8074 VP control path bringup.
Add fixes in tlv.c and enable TLV helper routines for WIN.
Fixed some inconsistencies in wmi API params by adding compiler flags.
This needs to be cleaned up so that API and params have common interface
between WIN and MCL.
Change-Id: I0821daa58df86ad0b394a7846a982a9e3577cd14
CRs-Fixed: 1063252
Address compilation issues for WIN with new Lithium Firmware headers.
Also removed dependency on htt.h from header files, which may need to
add explicit dependency on htt.h in .c files.
Change-Id: Ia5027963837e645bc3f81a3db98c2ea06789aea8
CRs-Fixed: 1061096
Propagation from qcacld-2.0 to qcacmn.
Add support to get per chain rssi from fw through the
already existing WMI command WMI_REQUEST_STATS_CMDID
and then store it in the station_info structure defined
by cfg80211.
Change-Id: Id50c96dd322b5ca4db34cf2df901730d8b103251
CRs-Fixed: 1005367
Send HT/VHT CAPs IE to firmware per band. This will allow certain
features like LDPC to be configured per band.
Change-Id: I21c83af984f9be3ade46121ef148b52568c3ad0f
CRs-Fixed: 1059454
qcacld-2.0 to qcacmn propagation
In some cases wmi_buf_alloc is used to allocate memory, while
adf_os_mem_free(vos_mem_free) is used to free the memory.
vos_mem_free checks if memory is present in vosMemList to detect
double free.
Now as wmi_buf_alloc doesnot add the allocated memory to
vosMemList, vos_mem_free assume it to be double free case and cause
kernel panic.
Use proper corresponding API to free memory
Change-Id: I3602887d2bfdb407e5805aedd7a97a57440a4567
CRs-Fixed: 1004079
* changes:
qcacmn: Use suspend_noirq callback instead of disabling irqs
Release 5.1.0.23C
qcacmn: Implement QDF API to get queue mapping and total ram size
qcacmn: Fixing incorrect qdf_mem_set API usage in wmi_unified_non_tlv.c
qcacmn: Fix for kernel panic in wifi down path for peregrine
Release 5.1.0.23B
qcacmn: Free WMI HB command buffer in case of errors
Release 5.1.0.23A
qcacmn: Add WMI API for setting bandwidth fairness
Release 5.1.0.23
qcacmn: unmap buffer for CE destination ring en-queue error
Release 5.1.0.22Z
Enable or disable OKC flag in WMI roam scan offload request based on
okc_enabled parameter in roam request from CSR.
Change-Id: I19ad7ea2171532f2417742e205d408bdd52682c0
CRs-Fixed: 1057181
The qdf_mem_set API is used incorrectly in a few instances inside
wmi_unified_non_tlv.c
The argument list is - <pointer to address, size, value>
However, some places, it is sent as - <pointer to addr, value, size>
This change fixes such incorrect function calls to qdf_mem_set().
Change-Id: Id50136f630022b1fdeaddbdefcad9f637f917e9e
CRs-Fixed: 1048504
WMI HB command buffer is not freed in case of tx error,
Free WMI HB command buffer in case of errors.
Propagation from qcacld-2.0 to qcacmn.
Change-Id: I15577c50cefc0cc2e9129f175cf874f17acc430e
CRs-Fixed: 1001068
This change implements the Non-TLV WMI API for setting bandwidth
fairness. This WMI command was implemented as part of the recent WIN SW
release. This change ensures it is adapted to convergence code structure.
Change-Id: Ib9984c43b91b105bfb4687a7591f4fab509febc4
CRs-Fixed: 1060577
This change fixes the compilation issues faced due to WMI convergence
changes on the big endian platform.
Change-Id: I18bae4fb7884683d8621ce9a862dc1a51ef84f82
CRs-Fixed: 1039318
Propagation from qcacld-2.0 to qcacld-3.0
Current implementation has support for IPv6 addresses of type
unicast for NS offload to firmware.
As part of this change add anycast addresses for NS offload.
CRs-Fixed: 954880
As part of MBO(Multiband Operations), host driver need to supply
the Assoc IEs to FW after initial connection. FW uses these Assoc
IE's in subsequent roaming.i.e Reassociation requests.
This Fix updates the WMI interface to provide support for passing
Assoc IEs to FW.
Change-Id: Ida3d2947714002233090a3f9075dd8d674a3c224
CRs-Fixed: 1039969
Propagation from qcacld-2.0 to qcacld-3.0
Current implementation has support for IPv6 addresses of type
unicast for NS offload to firmware.
As part of this change add anycast addresses for NS offload.
CRs-Fixed: 954880
Add changes to allow coexistence of WIN/ MCL TLV implementation
through use of CONFIG_MCL flag and change of MACRO names.
Change-Id: I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
Compilation fixes made to compile TLV on WIN code base.
Also, Previous gerrits used WMI_NON_TLV_SUPPORT for all
compilation fixes of WIN vs MCL, using CONFIG_MCL and
CONFIG_WIN wherever it is found appropriate to keep it
consistent with other modules.
Change-Id: I1c129d736746556210c46f3122e2739d233e1d6b
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
Propagation from qcacld-2.0 to qcacld-3.0
WMI pdev POWER_STATS request and report message defs
pktlog flag in HTT_T2H RX_IN_ORD_PADDR_IND
New release of Hawkeye HW header files
Change-Id: If2f122a6879b60052849b7efb738e7fc1a4c23f3
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Adding defined weightage values for WMI_PDEV_SET_PCL_CMDID
Add filter configure interface in fwcommon for sniffer mode
Change-Id: Ic822863cbbaffe7303dedf7f6c16ba92c2d0a5d3
CRs-fixed: 865207
Compilation error occurs due to undefined struct when
WMI_INTERFACE_EVENT_LOGGING disabled.
Use void pointer as argument to wmi_mgmt_cmd_record() and cast as header
struct inside logging function to avoid casting as undeclared type.
Change-Id: I7d0922ee2009b235473febdbcbc3317e432a1386
CRs-Fixed: 1043597
HOST driver unload sequence does following
1) Kill WLAN tasklet
2) Disable CE interrupts
3) Flush WMI RX work
Hence its unncessory to acquire eventq_lock as no one
will be using the shared resource during wmi detach.
Change-Id: I5c549358aeefc460c794c35659915d3b966c7350
CRs-Fixed: 1021376
Propagation from qcacld-2.0 to qcacld-3.0
Adding WMI defs for pdev and peer GET_ANTDIV_STATUS_CMD,
ANTDIV_INFO_EVENT msgs.
Change-Id: Iad3c57f0b4e10e68c86cef175b8cadcfd9e7fe1e
CRs-fixed: 865207
qcacld-2.0 to qcacmn propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in wmi unified API.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
Propagation from qcacld-2.0 to qcacld-3.0
Add WMI command to set GPIO numbers that are used to wakeup host
and wakeup target.
Changes to disable dynamic bandwidth RTS.
Add swol_assist_enable field to WMI extwow_set_app_type1_params
cmd to enable IoT mode WMI enums for CCK and OFDM max tx rates.
Change-Id: I26873873d7a355c179babaa7cc56e187e9771c92
CRs-fixed: 865207
Fix the occupied channel list that is being passed from CSR to
WMA to WMI to firmware.There is a conversion happening in
WMA from channel number to frequency which is the root of the
issue.
Change-Id: I8a2f8c9d31897b38086df26ebd386ec59d0f3540
CRs-Fixed: 1039020
Propagation from qcacld-2.0 to qcacld-3.0
Add mcast filter set/delete command that can take multiple
filters in a list.
Fix HTT typos to make MACROS consistent with the field name.
Change-Id: I97ca72f102faecfc3d20409b0d4819a09968417c
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
New WMI command for reorder queue setup/removal
Change-Id: I31ad0432a0d5f49eed55603ae7d9eeedbdd19876
CRs-Fixed: 865207
More detailed logging needed for mgmt frames
Add vdev_id, frame type, subtype, and channel to logs by defining wrapper
function around logging macro and calling it from send_mgmt_cmd_tlv
Change-Id: I0c8c26e3194d97be7d903f64c5c5909c2d4b9799
CRs-Fixed: 1011346
qcacld-2.0 to qcacld-3.0 propagation
Add support for NSS configurability per vdev type.
- Configure the 2g and 5g NSS with the INI value of
each vdev type
- Program the HT and VHT IE to FW for 1x1 and 2x2 mode,
FW will include them in scan probe request frames
Change-Id: I5cbf17a14ab6becad6cf5765ae5039fc284dc309
CRs-Fixed: 869026
Initialize bad peer tx control data structure in WMA,
send down the initial configuration info to fw and
configure the peer status update setting in the tx_rx module.
CRs-Fixed: 975526
Change-Id: Ib380e10a0b343b6a8f9c2c0bf6d6dd602d2601c5
Propagation from qcacld-2.0 to qcacld-3.0
Add dbglog IDs for ARP and DHCP packets
WMI CMDID for dbglog time stamp sync
Move reason code from wmi to nan_msg.h
Change-Id: I2e6e837fade375ef86c0c4247490b44ec502be1b
CRs-Fixed: 865207
Dwell time can be modify based on channel congestion per scan
request.
Add changes to enable firmware to use scan control flag and select
dwell time optimization algorithm based on ini values.
Change-Id: Iea3de57c1b7d087442e4b8984b4184d24bb8c930
CRs-Fixed: 994443
