As part of the original TDLS componentization the legacy typedef
tTdlsPeerStateParams was replicated as qca-wifi-host-cmn struct
tdls_peer_state_params. Subsequently when the TDLS component was
relocated back to qcacld-3.0 this struct was replicated again as
struct tdls_peer_update_state in the qcacld-3.0 TDLS public structs.
Unfortunately this left the driver with three different data
structures which serve the same purpose. Not only is this pointless,
but due to the way in which these structures are used there is an
implicit requirement that they be exactly identical. Further
complicating matters is the fact that these three structures each have
embedded structs which are also replicated. This approach is very
fragile since any change to any of these structs must be replicated
across the entire set. To align with the converged software
architecture and to improve code maintainability exclusively use the
TDLS public structs.
Change-Id: Ifc976815fea57afae86cc91b91c6b48f70b2a9a7
CRs-Fixed: 2395340
In current code, EV_DOWN event in stop-progress sub state sends
stop command to FW, As EV_DOWN is generic, it is casuing multiple
stop commands to FW. To avoid, for internal transitions added new
event STOP_REQ, which send stop command to FW
EV_DOWN event is not honored in STOP state, as it is not initial state
Change-Id: I5a3b44ab6e12f6d1c2d10ad55954c6a0510e5f9e
CRS-Fixed: 2401298
Currently there is no support from driver to send STA authorized
event to supplicant.
Use QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES vendor command to
send STA authorized event to supplicant.
Change-Id: I46416949f04dd28a1713cbebf1f7d0e84b5efda2
CRs-Fixed: 2175481
The aim is to remove CONFIG_MCL or CONFIG_WIN from
cmn component.
This change takes care send_flush_completion_to_user.
Cleaning up cmn code by replacing the CONFIG_MCL
with macro FEATURE_WLAN_DIAG_SUPPORT.
CRs-Fixed: 2397824
Change-Id: I57a82fec17210b49f778a950034ca442d11eb511
1. Enable CE5 and allow it to service
pktlog messages from the firmware.
2. Register full pktlog callback handlers
for handling sw_events and full tx pktlog.
Change-Id: Ifb70ac0993f2402201f88758845f730cf677b1a0
CRs-Fixed: 2388906
In current code, channel number is checked to enable multivdev restart
synchronization, this assumption is not valid as channel width change
can also be requested.
To fix this, used a flag to enable multivdev restart synchronization.
Change-Id: I2633ee42ae7d8c127d8369f36f14e861431a21cc
CRs-Fixed: 2400987
Epping mode is currently borken in qcacld-3.2 codebase.
Fix epping mode for QCN7605 for USB and PCIe interface.
Change-Id: I5ae5ff70b77836cdd6c3d002cf98d4949838b624
CRs-Fixed: 2400180
During runtime PM suspend, some key WMI commands will be tagged
so that they can be extracted from HTC queue in order to send to
firmware with priority. Some of these commands are no longer needed
for tagging in latest offload sequence. Hence remove them from the
list.
Change-Id: If0bc547969837d6326aa8d7248d65677c5d3a940
CRS-fixed: 2398382
Sometimes we receive num_msdu as 0 with ru_tones and ru_start
which cause OFDMA counter to get increament
Change-Id: Ib099a2143799551266e94bc9b8d281237092a46e
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
CE1 is used only during initial endpoint exchange and some control
exchange like cookies. On HK, there is no need to enqueue 512 buffers.
Hence reduce it to 128. This provides a savings of 384 buffers or ~1.5M.
Change-Id: I2b3a58c1d7a914194d842824945d12ae7c9ebb05
CRs-Fixed: 2401025
Move reg_enable_dfs_channels() outside of MCL specific macro as
it is also used by WIN.
Change-Id: I8fecf365a695524ad7a97b66eca5c6657aedb264
CRs-Fixed: 2398789
Use __dp_peer_find_by_id, as this will return the peer, even if
delete is in progress. This is needed, if the FW has crashed and
there is no response expected
Change-Id: I0f77184860622b06f793fcfd321547ea41e958cd
CRs-Fixed: 2392817
pktlog log types were received as individual log types
like PKTLOG_TYPE_TX_CTRL, PKTLOG_TYPE_RC_FIND, etc.
As per the current implementation, FW sends an
aggregated log type as PKTLOG_TYPE_SW_EVENT.
This aggregated log type event is not logged to
userspace.
Log sw_event pkt_stats to logger thread in
process_sw_event.
Change-Id: I5b12ecce25af6395a10eb7c7452a7eeb042d7c0a
CRs-Fixed: 2396980
Add return path for fc_peer_stats for peer mac address if the peer
is connected to another pdev.
The DP peers are maintained at the SOC as such there is no check
to make sure that the peer is for a particular pdev.
This issue is especially seen when an end user invokes
fc_peer_stats in wifi0 for a peer that is connected to wifi1. In
such a case, we should be returning an error since the peer is not
connected to the pdev that the user application is directed to.
Change-Id: Ie1142c508605bfcf2fd49adc863879eee98fffe6
CRs-Fixed: 2397052
Remove dedicated CDP API for mcastenhance 6 AST lookup and replace
the calls with generic APIs
Change-Id: Ic2c5613be57d7eaffc233ee601f136694f81f848
CRs-Fixed: 2369606
Add ini parameters to control the scan burst duration in STA, SAP
and GO cases.
Change-Id: Ib9f0cdae660b6d425887fefebf9e64f9ac977593
CRs-Fixed: 2398746
Current max message size of 2048 will result in a 4K slab allocation due
to padding and shinfo additions. We observed that most of the WMI
allocations are within 1600 and there is no need to set max bu size as
2048. Hence reduce max buf size to 1700 for low memory profile so that
allocation on host result in a 2K skbs.
Change-Id: Icb25be0f4ce60112ef6293f39f9dcc57ebc0288c
CRs-Fixed: 2394768
BKID is part of only assosciation and reassociation
request frames, So include it only for sta mode.
Change-Id: Ic43e20b46154a957a7290cdcc70615247949cba7
CRs-Fixed: 2398256
The non debug version of qdf_mem_malloc logs
allocation failures at WARN trace level
and the debug version uses ERROR trace level.
Also the default log level for QDF component is set to ERROR,
so with this, for failures in the non debug version
of qdf_mem_malloc, we would not see any logs.
Changing the log level to ERROR for failures logs in
the non debug version of qdf_mem_malloc.
Change-Id: I1e28cddfac8f909dec6e3bf6c3beb368953cd357
CRs-Fixed: 2397096
Host SW should not update the cached TP pointer to HW register before
current cached TP REO entry finishes processing, otherwise there is
risk if HW HP catches up to this cached TP, but HW TP value has been
updated to (cached TP + one entry size) now, this TP REO entry might
be overwritten.
Refine it and only update TP pointer to HW when entry processing has done.
Change-Id: I54df3247745717855a67649f440c606c518efd61
CRs-Fixed: 2391658
As part of the TDLS feature, structs sta_uapsd_trig_params and
sta_uapsd_params were replicated from qcacmn wmi_unified_param.h to
qcacld-3.0 wlan_tdls_public_structs.h, and conditional compilation
based upon CONVERGED_TDLS_ENABLE was used to determine which structs
are actually used by a build. Since these structs are not specific to
TDLS, remove the featurization so that the structs from qcacmn
wmi_unified_param.h are always used.
This is co-dependent upon I37b2d80a4710aced158dcf2ea973d15801a7cecc
("qcacld-3.0: Remove UAPSD trigger structs from TDLS public structs").
Change-Id: Ida0f2b6f131ff2dce7217b881ffadecfd685f563
CRs-Fixed: 2395822
Add the WMI PDEV param 'wmi_pdev_param_ul_ppdu_duration' to
add command support to modify the UL PPDU duration.
Change-Id: If2f8ef02d4f992d91fa745599d5c08b1dfccceca
CRs-fixed: 2393139
QDF_STATUS is defined in qdf_status, but related APIs
qdf_status_to_os_return() and qdf_status_from_os_return() are defined
in qdf_util. Create a new file, qdf_status.c, and move these functions
there instead.
Change-Id: Iaa2efa5f662be014a61a8490c3fab411ec0f2054
CRs-Fixed: 2395178
